Xvive U2 2.4GHz digitalt trådløst guitarsystem brugermanual

1. Introduktion

The Xvive U2 Digital Wireless Guitar System provides musicians with high-fidelity audio transmission and freedom of movement. Operating on the 2.4GHz band, this system offers a reliable, plug-and-play solution for electric guitars, bass, keyboards, and other instruments with a 1/4" output jack. Its compact design and rechargeable battery make it ideal for various performance and practice environments.

2. Produktet er slutview

The Xvive U2 system consists of two main components: a Transmitter and a Receiver.

• Sender: Plugs into your instrument's 1/4" output jack. It sends the audio signal wirelessly.
• Modtager: Plugs into your amplifier, pedalboard, or audio interface's 1/4" input. It receives the wireless audio signal.

Figur 1: Forside view of the Xvive U2 Transmitter and Receiver units.

Figur 2: Side view of the Xvive U2 Transmitter and Receiver, highlighting the 220° rotatable 1/4" jacks for flexible connection.

3. Opsætning

3.1. Opladning af enhederne

Both the Transmitter and Receiver units are equipped with built-in lithium-ion batteries. Use the included dual-ended USB charging cable to charge both units simultaneously. Connect the micro-USB ends to each unit and the standard USB-A end to a compatible USB power source (e.g., computer USB port, USB wall adapter). A full charge typically takes approximately 2 hours and provides up to 5 hours of continuous use. The LED indicator will show charging status.

3.2. Tilslutning af systemet

1. Connect Transmitter to Instrument: Plug the Xvive U2 Transmitter into your instrument's 1/4" output jack. The 220° rotatable plug allows for optimal positioning on various instrument body types.
2. Connect Receiver to Amplifier/Interface: Plug the Xvive U2 Receiver into the 1/4" input of your amplifier, pedalboard, or audio interface.

Figure 3: The Xvive U2 Transmitter connected to an electric guitar.

Figure 4: The Xvive U2 Receiver connected to a guitar amplivligere.

Figure 5: Connection diagram for the Xvive U2 Wireless Guitar System.

3.3. Channel Alignment

The Xvive U2 system features 4 selectable channels to prevent interference. To align the transmitter and receiver to the same channel:

1. Power on both the Transmitter and Receiver units using their respective ON/OFF switches.
2. Observe the blue LED indicator on each unit. It will flash a certain number of times (1 to 4) to indicate the current channel.
3. To change the channel, double-click the 'Channel' button on either the Transmitter or Receiver. The unit will cycle through the channels (1, 2, 3, 4).
4. Ensure both the Transmitter and Receiver are set to the same channel for proper operation.

4. Betjeningsvejledning

4.1. Tænd/sluk

To power on each unit, slide the ON/OFF switch to the 'ON' position. To power off, slide the switch to the 'OFF' position.

4.2. Kompatibilitet

The Xvive U2 is compatible with most electric guitars, bass guitars, keyboards, and other electric musical instruments equipped with a 1/4" output pickup. The 220° rotatable plug ensures a secure and convenient fit for various instrument designs.

4.3. Range and Latency

The system operates with less than 5ms latency, ensuring a virtually imperceptible delay between playing and sound output. It offers an effective range of approximately 90 feet (27 meters) outdoors with a clear line of sight. The 2.4GHz digital wireless technology provides reliable signal transmission, even routing through walls effectively in indoor environments.

5. Funktioner

• High-Fidelity-lyd: Delivers 24-bit / 48 kHz digital audio for clear and accurate tone reproduction across a 20 Hz - 20KHz frequency response.
• Ultra-lav latens: Experience near-zero delay with less than 5ms latency, crucial for live performance and recording.
• Udvidet rækkevidde: Reliable signal transmission up to 90 feet (27 meters) in open outdoor environments.
• Lang batterilevetid: Integrated lithium batteries provide up to 5 hours of playtime on a single charge.
• Fleksibelt design: The 220° rotatable plug accommodates various instrument jack placements.
• Multi-Channel Operation: Four selectable channels allow multiple U2 systems to operate simultaneously without interference.

6. Vedligeholdelse

6.1. Batteripleje

To maximize battery lifespan, avoid fully discharging the units regularly. Recharge them promptly when the low battery indicator appears. Store the units in a cool, dry place when not in use for extended periods.

6.2. Rensning

Wipe the units with a soft, dry cloth to remove dust and grime. Do not use liquid cleaners or abrasive materials, as these may damage the finish or internal components.

7. Fejlfinding

• Ingen lyd/periodisk signal:
  • Sørg for, at både sender og modtager er tændt.
  • Verify that both units are set to the same channel (refer to Section 3.3).
  • Check battery levels on both units and recharge if necessary.
  • Ensure the units are within the effective operating range (approx. 90 feet line-of-sight).
  • Minimize physical obstructions between the transmitter and receiver.
• Interferens/støj:
  • Change to a different channel on both units (refer to Section 3.3).
  • Move away from other 2.4GHz wireless devices (e.g., Wi-Fi routers, other wireless systems) that may cause interference.
• Opladningsproblemer:
  • Ensure the USB cable is securely connected to both the units and the power source.
  • Prøv en anden USB-port eller strømadapter.

8. Specifikationer

9. Garanti og support

For warranty information and customer support, please refer to the official Xvive webwebstedet eller kontakt din forhandler. Gem din købskvittering som købsbevis.