Sauter SPI6467B Induction Hob User Manual

1. Introduktion

This manual provides essential information for the safe and efficient use of your Sauter SPI6467B Induction Hob. Please read these instructions carefully before installation and use, and keep them for future reference. Proper installation, operation, and maintenance are crucial for optimal performance and safety.

2. Sikkerhedsoplysninger

Your safety and the safety of others are paramount. Please observe all safety warnings and precautions.

Generel sikkerhed

• Sørg for, at apparatet installeres af en kvalificeret tekniker i overensstemmelse med lokale regler.
• Do not operate the hob if the glass ceramic surface is cracked or broken. Disconnect it from the power supply immediately.
• Hold børn væk fra apparatet under drift og når det køler af.
• Opbevar ikke brandfarlige materialer på eller i nærheden af ​​kogepladen.
• Brug kun induktionsegnet køkkengrej.
• Avoid placing metallic objects such as knives, forks, spoons, and lids on the hob surface, as they can become hot.
• Rør ikke ved varme overflader. Brug ovnluffer eller grydelapper.
• Always turn off the cooking zones after use.

Elektrisk sikkerhed

• The appliance must be connected to a suitable electrical supply (240 Volt, 32A circuit recommended).
• Ensure the electrical connection is easily accessible after installation.
• Hvis netledningen er beskadiget, skal den udskiftes af producenten, dennes serviceagent eller lignende kvalificerede personer for at undgå en fare.

3. Produktet er slutview

The Sauter SPI6467B is a 3-zone induction hob designed for efficient and flexible cooking. It features a black glass ceramic surface with touch controls.

Figur 3.1: Øverst view of the Sauter SPI6467B Induction Hob.

Kontrolpanel

The hob features a touch control panel for each cooking zone, allowing precise power adjustments and timer settings.

Figur 3.2: Detaljeret view of the touch control panel for the induction hob. Each zone has independent power and timer controls, along with boost and flexible zone options.

Kogezoner

• Samlede zoner: 3 induktionskogezoner.
• Flexible Zone (Horizone): One large flexible zone (4000 W) that can accommodate various cookware sizes, including fish kettles or multiple smaller pots. This zone can be used as two independent cooking areas.
• Standard Zones: Two additional zones, 16 cm and 21 cm in diameter.

Figure 3.3: The induction hob in use, showcasing the flexible cooking zone accommodating a large rectangular pot and a round pot.

4. Opsætning og installation

The Sauter SPI6467B is a drop-in induction hob designed for seamless integration into your kitchen countertop. Professional installation is highly recommended.

Installationsdimensioner

• Udskæringsmål: 56 cm (width) x 49 cm (depth).
• Samlede kogeplader dimensioner: 60 cm (width) x 51 cm (depth).
• Produktmål (D x B x H): 5.2D x 60W x 55H centimeters.

Figure 4.1: Technical diagram illustrating the required cut-out dimensions (560x490 mm) for countertop installation and overall hob dimensions (580x510 mm).

Elektrisk tilslutning

• The hob requires a wired electrical connection.
• A dedicated 32A circuit is necessary for proper operation. A 16A circuit will not be sufficient.
• Ensure the electrical connection point is accessible for maintenance.

Ventilation

Adequate ventilation is crucial for the induction hob's performance and longevity. Ensure there is sufficient space between the hob and any underlying oven or cabinetry. Do not obstruct the air outlet at the front of the hob.

5. Betjeningsvejledning

The Sauter SPI6467B Induction Hob offers intuitive touch controls for precise cooking.

Tænd/sluk

• To turn on: Touch the main power symbol.
• To turn off: Touch and hold the main power symbol until the hob switches off.

Selecting a Cooking Zone and Adjusting Power

• Placer induktionskompatibelt køkkengrej på den ønskede kogezone.
• Select the zone by touching its corresponding control.
• Adjust the power level using the '+' and '-' touch controls. The hob offers 14 power positions.

Boost funktion

For rapid heating, activate the Boost function for a selected zone. This provides maximum power for a short period. Touch the 'BOOST' control for the desired zone.

Timer funktion

Each cooking zone has an independent timer. To set the timer:

1. Vælg kogezonen.
2. Touch the 'TIMER' control.
3. Adjust the desired cooking time using the '+' and '-' controls.
4. The zone will automatically switch off once the set time has elapsed.

Flexible Zone (Horizone)

The large flexible zone offers modularity, allowing you to combine two heating elements into one large cooking area. This is ideal for oversized pots or multiple smaller dishes. The system ensures optimal heat distribution across the entire area.

6. Vedligeholdelse og rengøring

Regelmæssig rengøring og vedligeholdelse vil sikre din induktionskogeplades lange levetid og optimale ydeevne.

Daglig rengøring

• Lad kogepladen køle af efter hver brug.
• Tør den glaskeramiske overflade af med enamp en klud og en lille mængde mildt opvaskemiddel.
• Rinse thoroughly and dry with a clean, soft cloth to prevent water spots.

Fjernelse af genstridige pletter

• For burnt-on food or stubborn stains, use a specialized ceramic hob scraper.
• Apply a ceramic hob cleaner and rub gently with a non-abrasive sponge.
• Never use abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the surface.

Almen pleje

• Undgå at tabe tunge eller skarpe genstande på kogepladens overflade.
• Skub ikke køkkengrej med ru bund hen over overfladen, da dette kan forårsage ridser.

7. Fejlfinding

Før du kontakter kundesupport, bedes du læse følgende almindelige problemer og løsninger.

Hob Not Turning On

• Tjek strømforsyningen: Ensure the hob is properly connected to the electrical outlet and the circuit breaker has not tripped.
• Kontrolpanel låst: Some models have a child lock feature. Refer to the operating instructions to unlock the control panel.

Cooking Zone Not Heating

• Cookware compatibility: Ensure you are using induction-compatible cookware with a magnetic base.
• Køkkengrej størrelse: The base of the cookware must cover a sufficient portion of the cooking zone.
• Overophedningsbeskyttelse: The zone may have temporarily shut off due to overheating. Allow it to cool down.

Usædvanlige lyde under drift

• Humming/Buzzing: This is normal for induction hobs and is caused by the vibration of the cookware base.
• Klik: This can occur when the hob is regulating power levels.

Fejlkoder

If an error code appears on the display, consult the full product manual or contact customer support with the specific code.

8. Specifikationer

9. Garanti og support

Sauter is committed to quality and customer satisfaction.

Manufacturing and Origin

The Sauter SPI6467B Induction Hob is manufactured in France, reflecting a commitment to quality and European standards. Sauter has been producing appliances since 2011, with factories located in Orleans and Vendôme.

Figure 9.1: Illustration highlighting the product's origin in France, with a commitment to 15 years of spare parts availability and repairability.

Repairability and Parts Availability

Sauter ensures the availability of spare parts for 15 years, supporting the long-term repairability of your appliance.

Kundesupport

For technical assistance, warranty claims, or to inquire about spare parts, please contact your local Sauter service center or authorized dealer. Refer to the official Sauter webwebsted for kontaktoplysninger.