Generisk USB 2.0 Easycap DC60 videooptagelseskort instruktionsmanual

1. Introduktion

The Generic USB 2.0 Easycap DC60 Video Capture Card provides a solution for converting analog video and audio signals into digital format. This device connects to your computer via a USB 2.0 interface, allowing you to capture content from various analog sources such as VCRs, camcorders, or DVD players without requiring an additional sound card. The captured digital files can then be edited, stored, or shared.

This manual outlines the necessary steps for installation, operation, and provides troubleshooting guidance to ensure optimal use of your video capture card.

2. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• 1 x USB 2.0 Video Capture Card (Easycap DC60)
• 1 x USB-forlængerkabel
• 1 x Installation CD-ROM (containing drivers and application software)

Image 2.1: Contents of the Easycap DC60 package, including the capture card, USB extension cable, and installation CD.

3. Systemkrav

To ensure proper functionality, your computer system should meet the following minimum requirements:

• Operativsystem: Windows 98/ME, Windows 2000, Windows XP, Vista 32-bit, Windows 7. (Note: Compatibility with Windows 8 and newer operating systems may vary and might require updated drivers not included on the provided CD.)
• Hardwaregrænseflade: Available USB 2.0 port (USB 1.1 connection will result in lower video resolution).
• Processor: Pentium III 800 or higher recommended.
• Hukommelse: 256MB RAM or higher recommended.
• Vise: Display with at least 1024x768 resolution.
• Lydkort: Compatible Windows sound card.
• Opbevaring: 600MB of available hard drive space for program installation, 4GB+ for video capture and editing.

4. Opsætning og installation

Follow these steps to install the necessary drivers and connect the Easycap DC60 to your computer and video source.

4.1 Installation af driver og software

1. Insert the CD-ROM: Place the provided installation CD-ROM into your computer's optical drive.
2. Kør opsætning: Navigate to the CD-ROM drive and run the setup or installer application. Follow the on-screen prompts to install the drivers and the video editing software. It is recommended to install all components.
3. Genstart computeren: After the installation is complete, restart your computer if prompted. This ensures that all drivers are properly loaded.

Note: If your computer does not have an optical drive, or if you encounter driver issues, you may need to search for compatible drivers online. Ensure you download drivers specifically for the Easycap DC60 model and your operating system.

4.2 Tilslutning af enheden

1. Identificer forbindelser: The Easycap DC60 features several input connectors for video and audio. These typically include:
   • S-videoindgang: For higher quality analog video.
   • CVBS (Composite Video) Input: Gult RCA-stik til standard definition-video.
   • Lydindgang: Red (Right) and White (Left) RCA connectors for stereo audio.
   

   Billede 4.1: Detaljeret view of the Easycap DC60 connectors.
2. Connect to Video Source: Connect the appropriate video (S-Video or CVBS) and audio (Red/White RCA) cables from your analog video source (e.g., VCR, camcorder, DVD player) to the corresponding input ports on the Easycap DC60.
3. Tilslut til computer: Plug the USB connector of the Easycap DC60 into an available USB 2.0 port on your computer. You may use the provided USB extension cable if needed. A green LED on the device will illuminate, indicating power.

   Image 4.2: Connection diagram for the Easycap DC60.

5. Betjeningsvejledning

Once the device is connected and drivers are installed, you can begin capturing video and audio.

1. Start software: Open the video capture and editing software that was installed from the CD-ROM. This software typically provides options for selecting the video input source (Easycap DC60), audio input, and recording parameters.
2. Konfigurer indstillinger:
   • Videostandard: Select the correct video system (NTSC for North America/Japan, PAL for Europe/Australia, SECAM for France/Eastern Europe) to match your source.
   • Opløsning: For USB 2.0 connections, the output resolution can be up to 720x480 at 30 fps for NTSC, and 720x576 at 25 fps for PAL. USB 1.1 connections will limit resolution to 320x240 at 30 fps for NTSC, and 320x288 at 25 fps for PAL.
   • Outputformat: Choose your desired output file format (e.g., MPEG, AVI).
3. Start Playback on Source: Begin playing the video on your analog source device (VCR, camcorder, etc.).
4. Start optagelse: In the software, click the "Record" button to begin capturing the video and audio stream. Monitor the preview window to ensure the signal is being received correctly.
5. Stop optagelse: Click the "Stop" button in the software when you have finished capturing. The recorded file will be saved to the location specified in your software settings.
6. Edit and Export: Use the provided video editing software to trim, enhance, or combine your captured video files. You can then export these files for various uses, such as burning to DVD, transferring to mobile devices (iPod, PSP), or uploading to online platforms.

6. Specifikationer

7. Fejlfinding

If you encounter issues while using the Easycap DC60, refer to the following common problems and solutions:

• No Signal or Black Screen in Software:
  • Ensure all cables (video and audio) are securely connected to both the Easycap DC60 and your analog source.
  • Verify that the analog source device (VCR, camcorder) is powered on and playing content.
  • Check that the correct video input source (e.g., "USB 2.0 Capture Device" or similar) is selected within your capture software.
  • Confirm that the video standard (NTSC/PAL/SECAM) in the software matches your source.
• No Audio During Capture:
  • Ensure the red and white RCA audio cables are correctly connected.
  • Check the audio input settings in your capture software to ensure the Easycap DC60's audio input is selected.
  • Verify that the volume on your analog source is not muted or too low.
• Drivers Not Installing or Device Not Recognized:
  • Re-insert the installation CD-ROM and try installing the drivers again.
  • Ensure your operating system is supported (Windows 98/ME, 2000, XP, Vista 32-bit, Windows 7). Compatibility with newer Windows versions (e.g., Windows 10) is not officially guaranteed and may require specific drivers not included.
  • Try connecting the Easycap DC60 to a different USB port on your computer.
  • If the CD-ROM is missing or unreadable, search online for "Easycap DC60 drivers" along with your specific Windows version. Download drivers only from reputable sources.
• Poor Video Quality or Choppy Playback:
  • Ensure you are using a USB 2.0 port. Connecting to a USB 1.1 port will significantly reduce resolution and frame rate.
  • Close other demanding applications running on your computer during capture.
  • Verify that your computer meets the minimum system requirements, especially processor speed and RAM.
  • Check the quality of your source cables and the analog source itself.

8. Vedligeholdelse

To ensure the longevity and optimal performance of your Easycap DC60 Video Capture Card, follow these simple maintenance guidelines:

• Rensning: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners or solvents, which can damage the electronics.
• Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer, når den ikke er i brug.
• Håndtering: Handle the device and its cables with care. Avoid bending or pulling the cables excessively, which can cause internal damage.
• Forbindelse: Always insert and remove the USB connector gently to prevent damage to the port on the device or your computer.

9. Garanti og support

For information regarding warranty coverage, please refer to the documentation provided at the time of purchase or contact your retailer. As this is a Generic product, specific manufacturer support may not be available. For technical assistance, consult online resources or community forums related to Easycap devices.