Universal Office Chair Assembly Manual

1. Vigtige sikkerhedsoplysninger

Læs venligst alle instruktioner omhyggeligt inden montering og brug. Gem denne manual til senere brug.

• Sørg for, at alle dele er til stede og ubeskadigede, før monteringen påbegyndes. Må ikke anvendes, hvis der mangler eller er beskadigede dele.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Overspænd ikke skruerne under montering, da dette kan beskadige komponenterne.
• Hold børn og kæledyr væk fra samleområdet. Små dele kan være en kvælningsfare.
• Only use the chair for its intended purpose.
• Stå ikke på stolen.

2. Pakkens indhold

Verify that all components listed below are included in your package.

3. Monteringsvejledning

Follow these steps carefully to assemble your office chair.

1. Fastgør hjul til stjernebase: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Indsæt gasløft: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. Fastgør mekanismepladen til sædet: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. Fastgør armlæn til sæde: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Fastgør stolens ryglæn til armlænene: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. Tilslut sædeenheden til gasliften: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Betjeningsvejledning

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Højdejustering: To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. To lower the seat, lift the lever while seated. Release the lever at the desired height.
• Vippelås/oplåsning: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Vippespænding: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. Vedligeholdelse

Regular maintenance will prolong the life of your office chair.

• Rensning: Tør overflader af med en blød, damp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Fastgørelseskontrol: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er stramme. Efterspænd om nødvendigt.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• Smøring: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

6. Fejlfinding

Se dette afsnit for løsninger på almindelige problemer.

7. Specifikationer

Key technical details of your office chair.