1. Introduktion
The Vivitar VIV-PGBT-T5I Battery Grip is designed to enhance the functionality and ergonomics of compatible Canon Rebel cameras. It allows for extended shooting times by accommodating two Li-ion batteries or six AA batteries. Additionally, it provides a comfortable grip for vertical shooting, featuring an extra shutter release button and control dials for convenient access to camera functions.
Image 1.1: The Vivitar VIV-PGBT-T5I Battery Grip. This image shows the battery grip attached to a camera body, highlighting its ergonomic design and the additional controls for vertical shooting.
2. Opsætning og installation
2.1. Installation af batterier
The battery grip can be powered by either two compatible Li-ion batteries or six AA batteries using the included adapter plate.
- For Li-ion Batteries:
- Open the battery compartment door on the grip.
- Insert two fully charged Li-ion batteries, ensuring correct polarity as indicated inside the compartment.
- Luk batteridækslet ordentligt.
- Til AA-batterier:
- Slide the AA battery adapter plate out of the grip.
- Insert six AA batteries into the adapter plate, observing the polarity markings.
- Slide the loaded adapter plate back into the grip until it locks into place.
2.2. Montering af grebet på kameraet
- Sørg for, at dit kamera er slukket.
- Remove the camera's battery and the battery compartment door. Store the door in a safe place.
- Juster batterigrebets monteringsskrue med kameraets stativgevind.
- Insert the grip's electrical contact into the camera's battery compartment.
- Tighten the mounting screw on the grip until it is firmly attached to the camera. Do not overtighten.
3. Betjeningsvejledning
3.1. Tænd/sluk
After attaching the grip and installing batteries, power on your camera as usual. The grip's power button (if present and active) may need to be engaged to enable the grip's controls. Refer to your camera's manual for specific power management settings when using an external grip.
3.2. Vertikale skydekontroller
The Vivitar VIV-PGBT-T5I Battery Grip provides duplicate controls for comfortable vertical shooting.
- Udløserknap: Use the grip's shutter release button for vertical shots. It functions identically to the camera's main shutter button, including half-press for autofocus and full-press for capturing an image.
- Kontrolknapper: The front and rear control dials on the grip allow for quick adjustments to exposure settings (e.g., aperture, shutter speed) while holding the camera vertically.
- Other Control Buttons: Various other buttons on the grip replicate essential camera functions, providing convenient access without needing to reposition your hand.
4. Vedligeholdelse og pleje
- Keep the battery grip clean and dry. Use a soft, dry cloth to wipe off dust and smudges.
- Avoid exposing the grip to extreme temperatures, humidity, or direct sunlight.
- When not in use for extended periods, remove batteries from the grip to prevent leakage.
- Do not attempt to disassemble or repair the grip yourself. Contact qualified service personnel if issues arise.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Grebskontrollerne reagerer ikke. |
|
|
| Camera not powering on with grip. |
|
|
6. Specifikationer
- Model: VIV-PGBT-T5I
- Mærke: Vivitar
- Kompatible monteringer: Canon EF (for compatible Canon Rebel cameras)
- Strømkilde: 2 x Li-ion batteries or 6 x AA batteries (batteries not included)
- Inkluderede komponenter: Battery Grip, AA Battery Adapter Plate
- Farve: Sort
- Varens vægt: Approximately 0.9 Pounds (without batteries)
- Fabrikant: Sakar International, Inc.
7. Garanti og support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Vivitar webwebsted. Gem din købsbevis til garantikrav.
Fabrikant: Sakar International, Inc.
Modelnummer: VIV-PGBT-T5I