Godox X2T-S TTL Wireless Flash Trigger Transmitter for Sony Cameras User Manual

Indledning

The Godox X2T-S is a TTL wireless flash trigger transmitter designed for Sony cameras, featuring 2.4G wireless transmission and Bluetooth connectivity. It supports a range of advanced flash functions including TTL autoflash, 1/8000s high-speed sync, multiflash mode, and manual mode. This manual provides detailed instructions for setting up, operating, and maintaining your X2T-S transmitter.

Figure 1: Godox X2T-S Wireless Flash Trigger Transmitter, showing the top and front controls.

Opsætning

1. Installing on Camera

1. Ensure your camera and the X2T-S transmitter are powered off.
2. Slide the X2T-S hotshoe onto your camera's hotshoe mount.
3. Secure the transmitter by rotating the hotshoe locking mechanism until it is firmly attached.
4. Power on the X2T-S transmitter and your camera.

Figure 2: The X2T-S transmitter mounted securely on a Sony camera's hotshoe.

2. Tænd/sluk

Locate the power switch on the side of the unit. Slide it to the "ON" position to power on the transmitter. Slide it to "OFF" to power off.

Figur 3: Side view of the X2T-S, highlighting the power switch and other controls.

3. Bluetooth Connection (GodoxPhoto App)

1. Download the "GodoxPhoto" app from your mobile device's app store (compatible with iPhone/Android phones or iPad/Android tablets).
2. Aktiver Bluetooth på din mobilenhed.
3. On the X2T-S, press and hold the MENU button to enter the menu, then navigate to the Bluetooth settings and ensure it is enabled.
4. Open the GodoxPhoto app and follow the on-screen instructions to connect to your X2T-S transmitter.
5. Once connected, you can control flash mode, power output, modeling light mode, and other settings directly from the app.

Betjeningsvejledning

1. Grundlæggende betjeningselementer og display

The X2T-S features an LCD screen for clear display of settings, along with 5 group setting buttons (A, B, C, D, E) and 3 function buttons (MODE, MENU, SET, ALL) for quick adjustments. The control wheel allows for easy value changes.

Figur 4: Nærbillede view of the X2T-S LCD display and control buttons.

2. Wireless X System (2.4G)

The built-in Godox 2.4G Wireless X System provides a reliable operating distance of up to 100 meters. To avoid signal interference, ensure the channels and wireless IDs of the master (X2T-S) and slave units (Godox flashes) are set to the same values.

• Grupper: The X2T-S supports 5 groups (A, B, C, D, E) for controlling multiple flash units independently.
• Kanaler: 32 channels are available to prevent interference.
• Trådløst ID: Access to 99 wireless ID settings further limits interference from other systems.

3. Blitztilstande og -funktioner

• TTL autoblitz: Justerer automatisk blitzudladningen for korrekt eksponering.
• Manuel tilstand: Giver præcis kontrol over flashens effekt.
• Multi-flash Mode: Fires a series of rapid flashes for creative effects.
• Højhastighedssynkronisering (HSS): Enables flash synchronization at shutter speeds up to 1/8000s.
• Flasheksponeringskompensation (FEC): Adjusts flash output relative to the camera's metered exposure.
• TCM Function: Converts TTL flash values into manual power output values, allowing for quick transitions between automatic and manual control.
• Modellering L.amp Kontrollere: Juster modelleringen lamp settings of compatible Godox flashes.
• AF Assist Light: The X2T-S features an AF assist light that uses visible light to aid camera autofocus in low-light conditions.

Opretholdelse

• Hold enheden tør. Rør den ikke med våde hænder, og sænk den ikke ned i vand.
• Avoid sudden temperature changes, as this can cause condensation.
• Rengør enheden med en blød, tør klud. Brug ikke skrappe kemikalier eller opløsningsmidler.
• Store the device in a cool, dry place away from direct sunlight and excessive heat.
• Protect the hotshoe contacts from dust and damage.
• The X2T-S uses a USB-C connection for firmware updates, which is more reliable than MicroUSB. Keep the port clean.

Fejlfinding

• Blitzen udløses ikke:
  • Ensure both the X2T-S and the flash unit(s) are powered on.
  • Verify that the channels and wireless IDs on the transmitter and receiver (flash unit) are identical.
  • Tjek batteriniveauet på begge enheder.
  • Ensure the flash unit is within the operating range (up to 100 meters).
  • Confirm the X2T-S is securely mounted on the camera's hotshoe.
  • If using multiple flashes, ensure they are assigned to the correct groups and enabled.
• Problemer med Bluetooth-forbindelse:
  • Make sure Bluetooth is enabled on both the X2T-S and your mobile device.
  • Restart both the X2T-S and your mobile device.
  • Ensure the GodoxPhoto app is up to date.
  • Prøv at ophæve parringen og parre enheden igen i din mobilenheds Bluetooth-indstillinger.
• Uregelmæssig blitzudgang:
  • Check for any obstructions between the transmitter and receiver.
  • Ensure the flash mode (TTL/Manual) is set correctly for your shooting scenario.
  • Verify that flash exposure compensation is not set to an unintended value.

Specifikationer

Garanti og support

For information regarding warranty coverage, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official Godox webwebsted for de seneste supportressourcer og kontaktoplysninger.