EKO Mirage Sensor Bin 30L Stainless Steel (Model: EK9278MT-30L) Instruction Manual

1. Introduktion

Thank you for choosing the EKO Mirage Sensor Bin. This 30-liter stainless steel waste bin features an advanced sensor mechanism for hands-free operation, promoting hygiene and convenience in your home or office. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

EKO Mirage Sensor Bin in a modern kitchen setting

Image: The EKO Mirage Sensor Bin, 30L, positioned in a contemporary kitchen environment, showcasing dens elegante design i rustfrit stål.

2. Sikkerhedsoplysninger

Overhold venligst følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:

Do not immerse the lid or sensor mechanism in water or any other liquid. This can damage electronic components.
Use only the specified battery type (AA batteries). Ensure correct polarity when installing batteries.
Hold sensorområdet fri for forhindringer for at sikre korrekt funktion.
Do not force the lid open or closed manually when the sensor is active, as this may damage the motor.
Dette produkt er kun beregnet til indendørs brug.
Opbevares utilgængeligt for børn for at forhindre utilsigtet skade eller misbrug.

3. Opsætning

3.1. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

EKO Mirage Sensor Bin Body (Stainless Steel)
Sensor Lid Assembly
Inner Bucket (30L)
Instruktionsmanual

3.2. Batteriinstallation

The sensor lid requires batteries for operation. Locate the battery compartment on the underside of the lid.

Gently flip the lid over to access the battery compartment.
Åbn batterirummets dæksel.
Insert 6 AA batteries (not included) according to the polarity indicators (+/-).
Luk batterirummets dæksel forsvarligt.
Locate the power switch (ON/OFF) on the underside of the lid and switch it to the "ON" position.

Close-up of the EKO Mirage Sensor Bin lid showing the sensor area, power switch, and battery compartment

Billede: Detaljeret view of the sensor bin lid, highlighting the infrared sensor, the power switch, and the open battery compartment with AA batteries inserted.

3.3. Inner Bucket and Liner Installation

Install the inner bucket and a trash liner:

Place the inner bucket into the main body of the bin. Ensure it sits flush at the bottom.
Drape a standard 30-liter trash bag over the rim of the inner bucket.
Tuck the edges of the trash bag into the designated slots or under the rim of the inner bucket to secure it.
Place the sensor lid assembly onto the main body of the bin, ensuring it is properly aligned and seated.

Close-up of the EKO Mirage Sensor Bin showing the inner bucket being placed into the main body

Image: The black inner bucket of the EKO Mirage Sensor Bin, partially inserted into the stainless steel outer body, demonstrating the liner installation step.

4. Betjeningsvejledning

4.1. Sensor Operation (Automatic Mode)

The sensor bin is designed for hands-free operation:

Ensure the power switch on the underside of the lid is in the "ON" position.
Approach the sensor area (located on the front of the lid) with your hand or an object within 10-15 cm (4-6 inches).
The lid will automatically open.
Efter 5 sekunders inaktivitet lukker låget automatisk.
If your hand or object remains within the sensor range, the lid will stay open.

4.2. Manual Open/Close

For extended opening or manual control:

To keep the lid open for a longer period, press the "OPEN" button on the lid. The lid will remain open until you press the "CLOSE" button.
To close the lid manually, press the "CLOSE" button.
To return to sensor mode, ensure no buttons are pressed and the power switch is "ON".

EKO Mirage Sensor Bin with its lid fully open, ready for use

Image: The EKO Mirage Sensor Bin with its lid in the fully open position, demonstrating its operational state for waste disposal.

5. Vedligeholdelse og pleje

Regular cleaning and proper care will extend the life of your sensor bin:

Udvendig rengøring: Tør ydersiden af rustfrit stål af med en blød,amp cloth and a mild detergent. Dry immediately with a soft, dry cloth to prevent water spots. Do not use abrasive cleaners or scouring pads.
Rengøring af låg: Rengør låget med adamp klæde. Do not submerge the lid in water. Ensure the sensor area is clean and free of dust or debris.
Rengøring af indvendig spand: The inner bucket can be removed and washed with soap and water. Rinse thoroughly and dry completely before placing it back into the bin.
Udskiftning af batteri: Replace all batteries when the lid's operation becomes slow or inconsistent. Always replace with new batteries of the same type.

6. Fejlfinding

If you encounter issues with your EKO Mirage Sensor Bin, refer to the following table:

Problem	Mulig årsag	Løsning
Låget åbner ikke automatisk.	Afbryderen er slukket. Batterierne er døde eller forkert installeret. Sensoren er blokeret eller snavset.	Slå strømmen til ON. Udskift batterierne med nye, og sørg for korrekt polaritet. Rengør sensorområdet med en blød, tør klud.
Lid opens slowly or inconsistently.	Lav batteristrøm. Motor mechanism obstruction.	Udskift alle batterier. Check for any physical obstructions around the lid's hinge or opening path.
Låget lukker ikke.	Object continuously in sensor range. Lid mechanism jammed.	Remove any objects from the sensor's detection area. Check for debris or damage around the lid's closing path.

7. Specifikationer

Model: EK9278MT-30L
Kapacitet: 30 liter
Materiale: Stainless Steel (Body), ABS Plastic (Lid, Inner Bucket)
Magt: 6 x AA batterier (medfølger ikke)
Åbningsmekanisme: Infrared Sensor, Manual Open/Close Buttons
Udfør type: Mat
Varens vægt: Cirka 7.6 kg
Farve: Sølv

8. Garanti og support

EKO products are manufactured to high-quality standards. For warranty information or technical support, please contact EKO customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt.

Gem venligst dit købsbevis for garantikrav.

EKO Official Webwebsted: www.ekohome.com

EKO EK9278MT-30L