1. Introduktion
This manual provides instructions for the installation, operation, and maintenance of the Morris Products Flat Panel LED Small Flood Light, Model 71533. This energy-efficient LED floodlight features a low-profile design and is suitable for various indoor and outdoor applications.
2. Sikkerhedsoplysninger
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
- Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle nationale og lokale el-forskrifter.
- Sørg for, at forsyningen voltage is compatible with the fixture's requirements (120/208/240/277V).
- Rør ikke ved strømførende ledninger.
- Brug passende personlige værnemidler (PPE) under installationen.
- This fixture is designed for wet locations (IP65, NEMA 4X).
3. Pakkens indhold
Verify that all components are present and undamaged upon opening the package. If any parts are missing or damaged, contact customer support.
- Flat Panel LED Small Flood Light (Model 71533)
- Beslagsophæng
Figure 3.1: Product packaging showing the Morris Products Flat Panel LED Small Flood Light box.
4. Opsætning og installation
This flood light is designed for surface mount installation using the included bracket. Ensure the mounting surface is structurally sound to support the fixture's weight.
4.1 Montering af armaturet
- Identificér et passende monteringssted.
- Position the bracket mount against the surface and mark the drilling points.
- Drill pilot holes as necessary.
- Secure the bracket mount to the surface using appropriate hardware (not included).
- Attach the flood light fixture to the bracket, ensuring it is securely fastened. The bracket allows for adjustment of the light's angle.
Figur 4.1: Forside view of the flood light showing the LED panel and bracket mount.
4.2 Elektriske ledninger
VIGTIG: All electrical wiring should be performed by a licensed electrician. Ensure power is disconnected at the circuit breaker before proceeding.
- The fixture supports Quad Voltage (120/208/240/277V). Connect the appropriate wires from the power supply to the fixture's wires.
- Typically, the black wire is Line (L), the white wire is Neutral (N), and the green wire is Ground (G). Refer to local electrical codes for specific color conventions.
- Use UL-listed wire connectors to secure all connections.
- Sørg for, at alle forbindelser er tætte og korrekt isolerede.
Figur 4.2: Tilbage view of the flood light, illustrating the wiring entry point and product label.
5. Betjeningsvejledning
Once properly installed and wired, the Morris Products Flat Panel LED Small Flood Light operates by receiving power from the connected electrical circuit.
- Tænd/sluk: The light is controlled by the external switch or remote control connected to its circuit.
- Lysoutput: The fixture provides 6,179 lumens of 5000K Cool White light.
- Photo Control (Optional): A photo control unit can be installed remotely to enable automatic dusk-to-dawn operation. This feature is not integrated into the fixture itself.
6. Vedligeholdelse
The Morris Products Flat Panel LED Small Flood Light is designed for minimal maintenance due to its durable construction and long-life LED components.
- Rensning: Periodically clean the polycarbonate lens with a soft, damp klud for at sikre optimal lysudbytte. Undgå slibende rengøringsmidler.
- Inspektion: Annually inspect the fixture and wiring for any signs of damage or wear. Ensure all mounting hardware remains secure.
- Korrosionsbestandighed: The bronze die-cast aluminum housing is corrosion-resistant, suitable for outdoor environments.
- LED levetid: The LED light source has an expected life of 50,000+ hours, reducing the need for frequent bulb replacement.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power supply; faulty wiring; tripped circuit breaker; defective fixture. | Check power supply at the source. Verify all wiring connections. Reset circuit breaker. If problem persists, consult a qualified electrician or contact customer support. |
| Lyset flimrer eller dæmpes. | Unstable power supply; loose wiring connection; incompatible dimmer (if applicable). | Ensure stable power. Check and tighten all wiring connections. This fixture is not designed for dimming unless specified by an external controller. |
| Reduceret lysudbytte. | Dirty lens; extreme operating temperature. | Clean the lens. Ensure the fixture is operating within its specified temperature range (-40°F to 131°F). |
8. Specifikationer
| Modelnummer | 71533 |
| Mærke | Morris produkter |
| Wattage | 50 watt |
| Lysstrøm | 6,179 lumen |
| Farvetemperatur | 5000K (Cool White) |
| Voltage | 120/208/240/277V (Quad Voltage) |
| Materiale til hus | Støbt aluminium |
| Linse materiale | Polycarbonat |
| Afslut farve | Bronze |
| LED-levetid | 50,000+ timer |
| Driftstemperatur | -40°F til 131°F (-40°C til 55°C) |
| IP-vurdering | IP65 (NEMA 4X) Dust & Water Tight |
| Certificeringer | cULus Listed for Wet Locations, DLC Listed |
| Dimensioner | Cirka 2 x 6 x 6 tommer |
| Varens vægt | 2 pund |
9. Garanti og support
The Morris Products Flat Panel LED Small Flood Light (Model 71533) comes with a 5-års garanti fra købsdatoen, dækker defekter i materialer og udførelse ved normal brug.
For warranty claims, technical support, or any inquiries, please contact Morris Products customer service. Keep your purchase receipt as proof of purchase.
Kontaktoplysninger:
Please refer to the Morris Products official webwebstedet eller din købsdokumentation for at få de seneste kontaktoplysninger.
