1. Introduktion
This user manual provides essential information for the safe and efficient operation, installation, and maintenance of your OHAUS Pioneer PA213 Precision Balance. Please read this manual thoroughly before operating the balance to ensure correct usage and to prevent damage or injury. Keep this manual for future reference.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger:
- Operate the balance only as described in this manual.
- Sørg for, at strømforsyningen voltage matches the requirements specified on the balance's rating label.
- Brug ikke vægten i farlige miljøer eller med ustabile strømkilder.
- Undgå at udsætte vægten for ekstreme temperaturer, fugtighed eller direkte sollys.
- Forsøg ikke selv at åbne eller servicere vægten. Overlad al service til kvalificeret personale.
- Keep the balance clean and free from dust and debris.
3. Pakkens indhold
Kontroller, at alle genstande er til stede og ubeskadigede ved udpakning:
- OHAUS Pioneer PA213 Precision Balance
- Strømadapter
- Vejepande
- Draft Shield (for models with 0.1mg and 1mg readability)
- Brugermanual
4. Opsætning
4.1 Udpakning og placering
- Carefully remove the balance from its packaging.
- Place the balance on a stable, level, and vibration-free surface, away from drafts, direct heat, and strong electromagnetic fields.
- Ensure adequate space around the balance for operation and ventilation.
4.2 Assembling the Weighing Pan and Draft Shield
- Place the weighing pan support onto the balance.
- Carefully place the weighing pan onto the support.
- For models equipped with a draft shield, assemble the glass panels according to the diagrams provided in the separate assembly guide (if applicable). The sliding doors are designed for easy removal and re-attachment for cleaning.
4.3 Udligning af balancen
The balance features a front bubble level for quick verification:
- Adjust the two leveling feet located at the rear of the balance until the air bubble is centered within the red circle of the level indicator.
- Check the level periodically, especially after moving the balance.
4.4 Strømtilslutning
- Connect the power adapter to the balance's power input jack.
- Sæt strømadapteren i en passende stikkontakt.
5. Betjeningsvejledning
5.1 Tænd/sluk
- For at tænde: Tryk på [ON/OFF] button. The balance will perform a self-test.
- For at slukke: Tryk og hold nede [ON/OFF] knappen, indtil displayet slukker.
5.2 Display overview
The balance features a digital LCD display without backlight. Key indicators include:
- Vægt værdi
- Unit of measure (e.g., g, mg)
- Stabilitetsindikator
- Tara indikator
5.3 Internal Calibration
The Pioneer PA213 balance features internal calibration for optimal accuracy:
- Ensure the balance is level and stable, with no weight on the pan.
- Refer to the balance's on-screen menu or specific button sequence (usually involving a CAL button or menu option) to initiate internal calibration.
- The balance will perform the calibration automatically. Do not disturb the balance during this process.
- A confirmation message will appear upon successful completion.
5.4 Basic Weighing Procedure
- Turn on the balance and allow it to warm up for a few minutes (typically 15-30 minutes for precision balances).
- Tryk på [NUL] or [TARE] knappen for at nulstille displayet.
- Placer den genstand, der skal vejes, midt på vejepladen.
- Wait for the stability indicator to appear, then read the weight value on the display.
- To weigh another item in the same container, place the container on the pan, press [TARE], then add the new item.
5.5 Selecting Environmental Parameters
The balance allows selection of environmental parameters for optimal adaptation to external conditions:
- Access the balance's menu settings (refer to the on-screen prompts or specific menu button).
- Navigate to the 'Environmental Settings' or similar option.
- Choose the setting that best matches your operating environment (e.g., stable, unstable, fast). This adjusts the balance's response time and stability filtering.
6. Vedligeholdelse
6.1 Rengøring
- Afbryd altid vægten fra strømforsyningen før rengøring.
- Clean the exterior of the balance with a soft, damp klud og et mildt rengøringsmiddel. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- The weighing pan and draft shield components can be removed for thorough cleaning.
- Sørg for, at der ikke kommer væske ind i vægthuset.
6.2 Opbevaring
- When not in use for extended periods, store the balance in a clean, dry, and stable environment.
- Protect the balance from dust using a cover.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Balancen tændes ikke | Ingen strømforsyning; defekt strømadapter | Check power connection; try a different outlet; replace adapter if necessary. |
| Ustabile aflæsninger | Drafts; vibrations; unstable surface; unlevel balance; electromagnetic interference | Close draft shield doors; move balance to a stable location; re-level the balance; adjust environmental settings. |
| Unøjagtige aflæsninger | Balance not calibrated; temperature changes | Perform internal calibration; allow balance to stabilize at ambient temperature. |
| Displayet viser meddelelsen 'Fejl' | Overload; internal fault | Remove excess weight; turn balance off and on; if error persists, contact support. |
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Model | PA213 |
| Produktkode | 001519 |
| Kapacitet | 210 g |
| Vise | Digital LCD (no backlight) |
| Kalibrering | Intern kalibrering |
| Nivellering | Forreste boblevaterpas |
| Trækskjold | Included (with easily removable sliding doors) |
| Miljøindstillinger | Kan vælges for optimal tilpasning |
| Dimensioner (pakke) | 10 x 10 x 10 cm |
| Vægt (vare) | 10 kilo |
| Strømkrav | Battery(s) / Pile(s) required: Yes (Batteries not included) |
9. Medieinformation
No product images or official product videos were provided for inclusion in this manual.
10. Garanti og support
OHAUS products are manufactured under stringent quality controls. For warranty information, technical support, or service, please contact your local OHAUS representative or visit the official OHAUS website. Please have your model number (PA213) and product code (001519) available when contacting support.