Clatronic AT 3605 Alcohol Tester User Manual

Indledning

This manual provides instructions for the safe and effective use of your Clatronic AT 3605 Alcohol Tester. Please read this manual thoroughly before operating the device and keep it for future reference. This device is designed for personal use as a preliminary indicator of alcohol presence and should not be used as a basis for legal decisions or official measurements.

Vigtige sikkerhedsoplysninger

• This device is intended for personal use as a preliminary indicator of alcohol presence. It is not a substitute for official breathalyzer tests or legal evidence.
• Do not operate the device while driving or performing other activities that require full attention.
• Opbevares utilgængeligt for børn.
• Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller fugt.
• Brug kun den angivne batteritype (2 x AAA).
• Bortskaf batterier og enheden i henhold til lokale regler.
• Wait at least 20 minutes after consuming alcohol before performing a test to ensure accurate readings.

Produkt overview

The Clatronic AT 3605 is a compact alcohol tester designed for personal use. It features a dual LCD display and provides optical warnings at specific alcohol levels.

Enhedskomponenter

Billede 1: Front view of the Clatronic AT 3605 Alcohol Tester. The device features a black face with a white casing. It has two digital LCD screens, one for time (12:00) and another for alcohol test results (e.g., 0.3 g/l and 0.3% BAC). Below the screens are three control buttons: MODE, SET, and ADJ. A larger POWER button is located further down. The Clatronic logo is visible at the bottom.

Kontrol og visning

• POWER -knap: Tænder/slukker enheden.
• MODE knap: Switches between different display modes (e.g., time display, alarm setting).
• SET -knap: Confirms selections or enters setting modes.
• ADJ knap: Adjusts values during settings.
• Upper LCD Display: Shows current time (12/24 hour format).
• Lower LCD Display: Shows alcohol test results in g/l and % BAC. Features red backlighting for results and optical warnings.
• Mouthpiece Opening: Located at the top for breath sampLing.

Opsætning

Installation af batteri

1. Find batteridækslet på bagsiden af ​​enheden.
2. Skub eller åbn dækslet.
3. Isæt 2 AAA-batterier, og sørg for at polerne vender korrekt (+/-).
4. Luk batterirummets dæksel forsvarligt.

Note: The device requires 2 AAA batteries. Ensure fresh batteries are used for accurate readings.

Indledende tidsindstilling

Upon first use or after battery replacement, you may need to set the time. Refer to the 'Operating Instructions' for time adjustment.

Betjeningsvejledning

Performing an Alcohol Test

1. Tryk på MAGT button to turn on the device. The device will perform a brief self-check.
2. Wait for the device to display "WAIT" or a similar indicator, followed by "BLOW" or a countdown.
3. When prompted, take a deep breath and blow steadily into the mouthpiece opening for approximately 5 seconds. Ensure a continuous breath sample.
4. The device will process the sample and display the results on the lower LCD screen in g/l and % BAC. The display will be red.
5. Optical Warning: The device provides an optical warning at 0.2‰ and 0.5‰. If your result is at or above these levels, the display will flash.
6. The device will automatically shut off after a period of inactivity to conserve battery life.

Setting Time and Alarm (if applicable)

1. Når enheden er tændt, skal du trykke på MODE button to cycle through display modes until the time setting mode is reached.
2. Tryk på SÆT button to enter the time adjustment. The hour digit will flash.
3. Brug ADJ knappen for at ændre timetallet.
4. Trykke SÆT again to move to the minute digit and adjust with ADJ.
5. Continue this process for 12/24 hour format or alarm settings if available.
6. Trykke MODE for at forlade indstillingstilstanden.

Opretholdelse

Rensning

• Wipe the device exterior with a soft, dry cloth.
• Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Nedsænk ikke enheden i vand eller anden væske.

Opbevaring

• Opbevar enheden på et køligt, tørt sted væk fra direkte sollys.
• Hvis produktet opbevares i længere tid, skal batterierne fjernes for at forhindre lækage.

Fejlfinding

Specifikationer

Garanti og support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Clatronic website. Keep your purchase receipt as proof of purchase. Spare parts availability is typically 1 year from purchase date.