Braeburn 2220

Braeburn 2220 Programmable Digital Thermostat User Manual

1. Introduktion

Welcome to your new Braeburn 2220 Programmable Digital Thermostat. This manual provides detailed instructions for the proper installation, operation, and maintenance of your thermostat. Please read this manual thoroughly before attempting to install or operate your new thermostat.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger under installation og drift:

  • Sluk altid for strømmen til varme- og kølesystemet ved hovedsikringen eller afbryderpanelet, før du installerer eller servicerer termostaten.
  • Sørg for, at alle ledningsforbindelser er sikre og overholder lokale el-forskrifter.
  • Do not short (jumper) across terminals on the gas valve or at the system control to test the system. This will damage the thermostat and void the warranty.
  • Use only 2 AA alkaline batteries for power, as specified.
  • If you are unsure about any part of the installation process, consult a qualified HVAC technician.

3. Produktet er slutview

3.1 Nøglefunktioner

  • Large 3 square inch display with bright blue backlight.
  • 5/2 Day Programmable with 4 program periods per day.
  • Multi-stage compatibility for conventional and heat pump systems.
  • Dual powered: operates on 24V AC or 2 AA alkaline batteries.
  • Non-volatile memory retains settings during power outages.
  • Adjustable temperature limits.
  • Filter check monitor.
  • Front-accessible reset button.

3.2 Komponenter og display

The following image illustrates the front panel of the Braeburn 2220 thermostat, highlighting its display and control elements.

Braeburn 2220 Programmable Digital Thermostat front view med LCD-display og kontrolknapper.

This image displays the front of the Braeburn 2220 thermostat. It features a large, backlit LCD screen showing the current room temperature, set temperature, time, day, and system status. Below the screen are various control buttons and switches for system mode, fan operation, programming, and temperature adjustment.

Displayelementer:

  • VÆRELSE: Indicates the current ambient temperature.
  • SET AT: Viser den ønskede temperaturindstilling.
  • COOL ON: Illuminates when the cooling system is actively running.
  • DAG/TID: Displays the current day of the week and time.
  • Ventilatorindikator: Shows whether the fan is in AUTO or ON mode.

Control Buttons and Switches:

  • Up/Down Arrows (Right Side): Juster den indstillede temperatur.
  • SYSTEM Switch (Bottom Left): Selects the operating mode: AFKØLE, SLUKKET, VARME, EMER (Emergency Heat).
  • PROG knap: Used to enter and adjust programming schedules.
  • HOLD knap: Maintains the current temperature setting indefinitely, overriding the program.
  • RETURN-knap: Used to exit programming or hold modes.
  • DAG/TID knap: Used to set the current day and time.
  • FAN Switch (Bottom Right): Selects fan operation: AUTO (ventilatoren kører kun under opvarmning/køling) eller ON (ventilatoren kører kontinuerligt).
  • RESET Button (Small hole on left): Resets the thermostat to factory default settings. Use a small pointed object to press.

4. Installation

4.1 Ledningsføring

Vigtig: Turn off power to your heating and cooling system at the main fuse or circuit breaker before beginning installation.

  1. Remove the old thermostat from the wall. Note the wire connections to each terminal.
  2. Label each wire with the corresponding terminal designation from your old thermostat.
  3. Mount the new Braeburn 2220 thermostat base plate to the wall.
  4. Connect the wires to the appropriate terminals on the Braeburn 2220. The terminal designations are: Rh, Rc, Y1, Y2, G, W1/E, W2, O, B, C. Refer to your system's wiring diagram for specific connections.
  5. Sørg for, at alle ledningsforbindelser er tætte og sikre.

4.2 Montering

After wiring, carefully attach the thermostat body to the mounted base plate. Ensure it snaps securely into place.

4.3 Indledende opstart

Insert two fresh AA alkaline batteries into the battery compartment. Restore power to your heating and cooling system at the main fuse or circuit breaker. The thermostat display should illuminate.

5. Betjening

5.1 Indstilling af tid og dag

  1. Tryk på DAG/TID button. The hour will flash.
  2. Brug Pil op/ned for at justere timen. Trykke DAG/TID again to set the minutes, then the day.
  3. Trykke TILBAGE at forlade.

5.2 Indstilling af temperaturen

I normal driftstilstand skal du bruge Pil op/ned on the right side of the thermostat to adjust the desired set temperature. The 'SET AT' display will change accordingly.

5.3 Systemtilstande

Brug SYSTEM switch at the bottom left to select your desired operating mode:

  • FEDT NOK: The thermostat will operate your cooling system.
  • OFF: Både varme- og kølesystemerne er slukket.
  • VARME: The thermostat will operate your heating system.
  • NØD (Nødvarme): For heat pump systems, this mode activates auxiliary heat directly, bypassing the heat pump compressor.

5.4 Ventilatortilstande

Brug FAN switch at the bottom right to select your desired fan operation:

  • BIL: Ventilatoren kører kun, når varme- eller kølesystemet er aktivt i drift. Dette er den mest almindelige og energieffektive indstilling.
  • PÅ: Ventilatoren kører kontinuerligt, uanset om varme- eller kølesystemet er aktivt.

5.5 Programming Schedule (5/2 Day)

The Braeburn 2220 allows for 5/2 day programming, meaning you can set one schedule for weekdays (Monday-Friday) and another for weekends (Saturday-Sunday), with four program periods per day (Morning, Day, Evening, Night).

  1. Tryk på PROG button. The display will show the first program period (e.g., 'MORN') and the current set time and temperature for that period.
  2. Brug Pil op/ned to adjust the start time for the period.
  3. Trykke PROG again to move to the temperature setting for that period. Use the Pil op/ned for at justere temperaturen.
  4. Fortsæt med at trykke PROG to cycle through all four periods for the weekday schedule, adjusting times and temperatures as needed.
  5. After setting the weekday schedule, the thermostat will automatically move to the weekend schedule. Repeat the process for Saturday and Sunday.
  6. Trykke TILBAGE for at gemme og afslutte programmeringstilstand.

5.6 Hold-funktion

To temporarily or indefinitely override the programmed schedule, press the HOLDE button. The thermostat will maintain the current set temperature until the HOLDE button is pressed again or the TILBAGE button is pressed to resume the program.

6. Vedligeholdelse

6.1 Udskiftning af batteri

When the battery indicator appears on the display, replace the two AA alkaline batteries promptly to ensure continuous operation. Open the battery compartment, remove old batteries, and insert new ones, observing polarity.

6.2 Rengøring

Rengør termostatens yderside med en blød, tør klud.amp klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de indvendige komponenter.

6.3 Filter Check Monitor

The thermostat includes a filter check monitor. When the 'FILTER' indicator appears, it's time to check or replace your system's air filter. After servicing the filter, press and hold the PROG button for 3 seconds to reset the monitor.

7. Fejlfinding

  • Ingen visning: Check batteries and ensure they are inserted correctly. Verify that power to the HVAC system is on.
  • Systemet svarer ikke: Ensure the SYSTEM switch is set to COOL or HEAT, not OFF. Check wiring connections. If using batteries, ensure they are fresh.
  • Forkert temperaturaflæsning: Sørg for, at termostaten ikke udsættes for direkte sollys, træk eller varmekilder.
  • Programmet kører ikke: Check if the HOLD function is active. Press HOLDE or TILBAGE for at genoptage programmet.
  • Termostatfejl: Tryk på NULSTIL button (small hole on the left side) with a pointed object to restore factory settings. You will need to re-enter your time, day, and program settings.

8. Specifikationer

  • Model: Braeburn 2220
  • Skærmstørrelse: 3 kvadrattommer
  • Batteritype: 2 AA alkaliske batterier
  • Terminalbetegnelser: Rh, Rc, Y1, Y2, G, W1/E, W2, O, B, C
  • Fugtighedsområde: 5% til 95% relativ luftfugtighed (ikke-kondenserende)
  • Nøjagtighed: +/- 1 degree F (+/- 0.5 degrees C)
  • Voltage: 24 Volt AC
  • Dimensioner: 6 x 4 x 1.7 tommer
  • Varens vægt: Cirka 0.16 ounce (uden batterier)
  • Særlige funktioner: Programmable, Backlight, Non-volatile memory, Filter check monitor, Adjustable temperature limit.

9. Garantioplysninger

This Braeburn thermostat is covered by a manufacturer's limited warranty. Please refer to the warranty card included with your product packaging or visit the official Braeburn webwebstedet for detaljerede garantivilkår og -betingelser. Gem din købsbevis til garantikrav.

10. Kundesupport

For further assistance, technical support, or to inquire about replacement parts, please visit the Braeburn website or contact Braeburn customer service. Contact information can typically be found on the product packaging or the official Braeburn webwebsted.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.