Moen WS84440SRN Two-Handle High Arc Bathroom Faucet

Indledning

Thank you for choosing a Moen faucet. This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Moen WS84440SRN Two-Handle High Arc Bathroom Faucet. Please read this manual thoroughly before beginning installation to ensure proper function and longevity of your product. This faucet features a Spot Resist Brushed Nickel finish, designed to resist fingerprints and water spots, and two lever handles for easy water adjustment.

Image: The Moen WS84440SRN Two-Handle High Arc Bathroom Faucet in Spot Resist Brushed Nickel finish. This image shows the main faucet body with its high arc spout and two separate lever handles.

Sikkerhedsoplysninger

Always turn off the main water supply before installing or servicing the faucet. Wear safety glasses and gloves during installation. If you are unsure about any part of the installation process, consult a qualified plumber.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Samling af badeværelsesarmatur (tud og håndtag)
• Afløbssamling
• Monteringshardware
• Varmt- og koldtvandsforsyningsledninger
• Instruktionsmanual (dette dokument)
• Valve (included)

Opsætning og installation

Kontrol før installation

• Ensure your sink has a three-hole configuration for widespread installation. The faucet handles can be installed at any distance between 8 inches to 16 inches.
• Ryd området under vasken.
• Sluk for hovedvandforsyningen til badeværelset.

Nødvendige værktøjer (ikke inkluderet)

• Justerbar skruenøgle
• Phillips-skruetrækker
• VVS-kit eller silikoneforsegling
• Lommelygte (valgfrit)

Installationstrin

1. Klargør vasken: Clean the faucet mounting area on the sink. Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet spout and handles.
2. Installer vandhaneudløb: Insert the faucet spout through the center hole of the sink. From underneath the sink, secure it with the provided washer and mounting nut. Tighten firmly but do not overtighten.
3. Installer håndtag: Insert the hot and cold handles through the outer holes of the sink. Ensure they are oriented correctly (hot on left, cold on right). Secure them from underneath with their respective washers and mounting nuts.
4. Tilslut vandforsyningsledninger: Attach the hot and cold water supply lines to the corresponding inlets on the faucet handles. Connect the other ends of the supply lines to your home's hot and cold water shut-off valves. Use an adjustable wrench to tighten connections, being careful not to overtighten.
5. Installer afløbssamling: Follow the separate instructions provided with the drain assembly. Ensure a watertight seal at the sink opening.
6. Test for lækager: Tænd langsomt for hovedvandforsyningen. Kontroller alle tilslutninger for lækager. Hvis der er lækager, skal du stramme tilslutningerne let, indtil de stopper.
7. Skyl vandhanen: Remove the aerator from the spout. Turn on both hot and cold water for a few minutes to flush out any debris from the lines. Turn off the water, reattach the aerator, and test the flow.

Image: A diagram illustrating a standard three-hole sink configuration, indicating where the faucet spout and two handles would be installed. This faucet is designed for such a setup.

Image: The Moen WS84440SRN faucet shown installed on a white bathroom sink, demonstrating its appearance in a typical bathroom setting.

Operation

Your Moen WS84440SRN faucet features two lever handles for precise control of water temperature and flow.

• Tænd/sluk: Rotate either handle upwards to turn on the water and downwards to turn off.
• Justering af temperatur: The left handle controls hot water, and the right handle controls cold water. Adjust the handles simultaneously to achieve your desired water temperature.
• Justering af flow: The further you rotate the handles upwards, the greater the water flow.

The aerated flow is ideal for everyday bathroom tasks such as brushing teeth and washing hands.

Vedligeholdelse og rengøring

Regelmæssig rengøring og vedligeholdelse vil bidrage til at bevare finishen og funktionaliteten af ​​din Moen-vandhane.

Rengøring af finishen

The Spot Resist Brushed Nickel finish is designed to be easy to clean. To maintain its appearance:

• Brug en blød, damp klud og mild sæbe.
• Undgå slibende rengøringsmidler, stærke kemikalier eller skuresvampe, da disse kan beskadige overfladen.
• Wipe the faucet dry after each use to prevent water spots.

Vedligeholdelse af belufter

Hvis vandgennemstrømningen falder eller bliver uregelmæssig, kan perlatoren være tilstoppet. Sådan rengøres:

1. Skru perlatoren af ​​spidsen af ​​tuden.
2. Skyl eventuelt snavs af filteret. Ved genstridige mineralaflejringer, læg belufteren i blød i en 50/50 opløsning af hvid eddike og vand.
3. Reattach the aerator to the spout.

Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på med din vandhane.

Specifikationer

Garantioplysninger

Your Moen WS84440SRN Two-Handle High Arc Bathroom Faucet is backed by Moen's Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For full details regarding warranty coverage, limitations, and how to make a claim, please refer to the official Moen warranty documentation or visit the Moen webwebsted.

Kundesupport

If you require further assistance, have questions not covered in this manual, or need to order replacement parts, please contact Moen customer support. Contact information can typically be found on the Moen website or on the product packaging. When contacting support, please have your model number (WS84440SRN) and purchase date available.