DYNAUDIO Emit M10 Bookshelf Speaker Instruction Manual

Indledning

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Vigtige sikkerhedsoplysninger

• Læs disse instruktioner grundigt, inden du bruger produktet.
• Gem disse instruktioner til fremtidig reference.
• Overhold alle advarsler på produktet og i betjeningsvejledningen.
• Følg alle instruktioner.
• Brug ikke dette apparat i nærheden af ​​vand.
• Rengør kun med en tør klud.
• Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
• Må ikke installeres i nærheden af ​​varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
• Brug kun tilbehør/tilbehør specificeret af producenten.
• Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.

Pakkens indhold

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Instruktionsmanual (dette dokument)

Hvis der mangler eller er beskadigede varer, bedes du straks kontakte din forhandler.

Opsætning

Højttalerplacering

Korrekt placering af højttalere er afgørende for optimal lydkvalitet. Overvej følgende retningslinjer:

• Afstand fra vægge: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Højde: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Stereotrekant: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Toe-in: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage focus.

Billede: Forside view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Billede: Forside view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Tilslutning til en Amplivligere

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Sluk: Sørg for din ampApparatet er slukket og taget ud af stikkontakten, før der foretages nogen tilslutninger.
2. Højttalerkabler: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Polaritet: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Sikre forbindelser: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Billede: Bagside view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Betjening af dine højttalere

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Tænd: Tilslut og tænd for din amplivligere.
• Lydstyrkekontrol: Start med amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Indbrudsperiode: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Griller: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Opretholdelse

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Rensning: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Griller: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Undgå direkte sollys og varme: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Fugtighed: Keep the speakers away from excessive moisture or humidity.
• Førerbeskyttelse: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

Fejlfinding

Hvis du støder på problemer med dine højttalere, kan du se følgende almindelige problemer og løsninger:

• Ingen lyd:
  • Sørg for ampStrømforsyningen er tændt og tilsluttet korrekt.
  • Kontroller alle højttalerkabelforbindelser på begge amplifier and the speakers for secure contact and correct polarity.
  • Kontroller, at den korrekte inputkilde er valgt på din amplivligere.
  • Confirm the volume is turned up on the amplivligere.
• Forvrænget lyd:
  • Reducer lydstyrken på din ampOverbelastning af højttalerne kan forårsage forvrængning.
  • Kontrollér højttalerkablets forbindelser for løse tråde eller kortslutninger.
  • Sørg for amplifier's power output is suitable for the speakers (refer to specifications).
  • Kontrollér lydkilden for forvrængning.
• Svag bas:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Uneven Soundstage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Specifikationer

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garanti og support

Garantioplysninger

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTYDenne garanti dækker materiale- og fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO webwebsted.

Kundesupport

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support webwebsted for yderligere hjælp.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.