MEAN WELL MW APV-25-12 12V 2.5A 25W LED-switching-strømforsyning med enkelt udgang Brugermanual

1. Introduktion

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of the MEAN WELL APV-25-12 Single Output LED Switching Power Supply. Please read this manual thoroughly before use and retain it for future reference.

2. Sikkerhedsoplysninger

ADVARSEL: Risk of electric shock. Installation should only be performed by qualified personnel. Disconnect power before installation or servicing.

• Sørg for, at input voltage range (90-264VAC) is compatible with your mains supply.
• Do not exceed the maximum output current of 2.5A or power of 25W.
• The unit is rated IP42, suitable for dry and damp locations. Avoid direct exposure to water or extreme humidity.
• Sørg for korrekt ventilation for at forhindre overophedning.
• This is a Class 2 power unit.
• The case material is 94V-0 flame retardant.

3. Produktfunktioner

• 25 Watt Hardwired Power Supply
• Input bindtage: 90 ~ 264Vac
• Udgang: 12VDC, 2.5A
• Fully Isolated, low profile plastik etui
• IP42 rated for dry and damp steder
• Klasse 2 kraftenhed
• 94V-0 flame retardant case material
• UL rated wire connections (18-20AWG)

4. Specifikationer

5. Opsætning og installation

Refer to the mechanical specification diagram for detailed wiring and dimensions.

Figur 1: MEAN WELL APV-25-12 Power Supply. This image displays the product's label, detailing input (100-240V~, 0.8A, 50/60Hz) and output (+12V ===, 2.1A) specifications, along with various certifications (UL, CE, EAC, IP42) and the serial number GB83927006. The input wires are blue (ACN) and brown (ACL), and output wires are black (V-) and red (V+).

Figur 2: Technical Diagrams for APV-25-12. This image includes a mechanical specification diagram with dimensions (e.g., 84mm length, 57mm width, 29.5mm height) and wire lengths (150±10mm for input, 150±10mm for output, UL1569 18AWG). It also shows a block diagram of the power supply's internal components, a derating curve illustrating output load vs. ambient temperature, and static characteristics showing load vs. input voltage.

1. Montering: The unit is designed for surface mount installation. Ensure the mounting location allows for adequate air circulation to dissipate heat.
2. Input Connection (AC): Connect the AC input wires to your mains power supply. The blue wire is for Neutral (ACN) and the brown wire is for Line (ACL). Ensure connections are secure and insulated.
3. Output Connection (DC): Connect the DC output wires to your LED lighting or other 12VDC load. The red wire is for positive (V+) and the black wire is for negative (V-). Observe correct polarity to prevent damage to the connected devices.
4. Indlæs: Ensure the total power consumption of your connected LED load does not exceed 25W.
5. Miljø: Install in a location that is dry and protected from direct moisture, consistent with its IP42 rating.

6. Betjeningsvejledning

Once properly installed and wired, the MEAN WELL APV-25-12 operates automatically. Simply apply AC power to the input terminals, and the unit will provide a stable 12VDC output to the connected load.

• Verify all connections are correct and secure before applying power.
• Monitor the unit for any unusual heat or noise during initial operation.

7. Vedligeholdelse

The APV-25-12 power supply requires minimal maintenance.

• Keep the unit clean and free from dust and debris to ensure proper heat dissipation.
• Kontroller regelmæssigt ledningsforbindelserne for tæthed og tegn på slid eller beskadigelse.
• Do not attempt to open or repair the unit. Refer servicing to qualified personnel.

8. Fejlfinding

If the power supply is not functioning as expected, consider the following:

• Ingen udgangseffekt:
  • Check the AC input power supply.
  • Verify all input and output wiring connections are correct and secure.
  • Ensure the load does not exceed the power supply's maximum rating (25W).
• Intermitterende drift:
  • Tjek for løse forbindelser.
  • Ensure the ambient temperature is within the operating range and ventilation is adequate (refer to derating curve in Figure 2).
• If issues persist, discontinue use and contact support.

9. Garanti og support

This MEAN WELL power supply comes with a 2-year warranty, ensuring reliability and performance.

For further technical information or support, please refer to the official MEAN WELL website or contact your supplier.

Additional manual information may be available at: www.meanwell.com/manual.html

Serial Number for reference: GB83927006