Duluth Forge FDI32R Dual Fuel Ventless Gas Fireplace Insert Instruction Manual

Indledning

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Duluth Forge FDI32R Dual Fuel Ventless Gas Fireplace Insert. This unit is designed to operate on either Natural Gas or Liquid Propane, delivering up to 32,000 BTU to heat areas up to 1,500 square feet without the need for an outside duct or chimney.

Key features include remote control functionality for on/off and temperature control, 9 realistic hand-painted ceramic fiber logs, and an Oxygen Depletion Sensor (ODS) for enhanced safety. Please read all instructions carefully before installation and use.

Duluth Forge FDI32R Fireplace Insert installed in a living room with a white mantel and lit flames. — The Duluth Forge FDI32R Fireplace Insert provides warmth and ambiance to your living space.

Vigtige sikkerhedsoplysninger

ADVARSEL: Forkert installation, justering, ændring, service eller vedligeholdelse kan forårsage personskade eller materielle skader. Læs installations-, drifts- og vedligeholdelsesvejledningen grundigt, før du installerer eller servicerer dette udstyr.

This appliance is for use with Natural Gas or Liquid Propane only.
Always ensure adequate ventilation. Do not obstruct air openings.
The Oxygen Depletion Sensor (ODS) is a safety device designed to shut off the appliance if oxygen levels in the room fall below a safe threshold. Do not bypass or tamper with the ODS.
Maintain a minimum clearance of 42 inches from the top of the fireplace to the ceiling.
Dette produkt indeholder kemikalier, der af staten Californien vides at forårsage kræft og fødselsdefekter eller anden reproduktionsskade. For mere information, besøg www.P65Warnings.ca.gov.
CAUTION: HOT WHILE IN OPERATION. DO NOT TOUCH. KEEP CHILDREN, CLOTHING, FURNITURE, GASOLINE AND OTHER LIQUIDS HAVING FLAMMABLE VAPORS AWAY.

The product is certified by PFS US for safety standards.

Opsætning og installation

The Duluth Forge FDI32R is a zero-clearance fireplace insert, meaning it can be framed without additional air gaps or spacing on the sides and top. It can be paired with a face mantel or recessed directly into a wall.

Komponenter inkluderet:

Fireplace Insert Unit
9 Ceramic Fiber Logs
Jernrist
Fjernbetjening og modtager
1 AAA batteri

Diagram showing included components: Oxygen Depletion Sensor, Minimal Assembly, Safety Mesh Guard, Hand-Painted Logs. — Included components for your fireplace insert.

Logplacering:

Carefully place the 9 hand-painted ceramic fiber logs onto the grate as per the diagram in the full product manual. Proper log placement is crucial for optimal flame appearance and safe operation. Ensure logs do not obstruct the pilot light or burner ports.

Close-up of the fireplace insert showing the elegant screen doors and the arrangement of 9 hand-painted ceramic gas logs with flames. — The elegant construction features a 9-piece hand-painted ceramic gas log set.

Brændstoftilslutning:

This unit features patented Dual Fuel Technology, allowing operation with either Natural Gas or Liquid Propane. Ensure the correct fuel type is connected and all gas connections are sealed and leak-tested by a qualified professional. The unit is 99.9% efficient, requiring no external venting.

Diagram illustrating the fireplace insert's features: 32,000 BTU/HR, works on Propane or Natural Gas, No Electricity Required, No Venting Required. — The fireplace insert is a dependable source of heat, operating on dual fuel without electricity or venting.

Video: Installation & Operation Overview

Denne video giver et generelt overblikview of a ventless gas fireplace insert, including aspects of its installation and operation.

Betjeningsvejledning

Tænding:

The unit features battery-assisted Piezo ignition. To light the pilot, follow the instructions on the control knob located at the base of the unit. Once the pilot is lit, the main burner can be activated.

Fjernbetjening:

The included remote control allows for convenient operation. It features On/Off buttons and temperature control. The remote acts as a thermostat, allowing you to set a desired room temperature. The fireplace will automatically turn on or off to maintain this setting.

TIL/FRA: Press the 'ON' button to ignite the flames. Press 'OFF' to extinguish.
KØRSELSVEJLEDNING: Use the 'MODE' button to switch between manual and thermostat modes.
SÆT: In thermostat mode, use the 'SET' button to adjust the desired temperature.

Close-up of the remote control with an LCD screen displaying temperature, and buttons for On, Off, Mode, and Set. — The convenient remote control allows for easy temperature and on/off management.

Video: Remote Control Usage

This video demonstrates how to use the remote control for the gas fireplace insert, including setting the thermostat.

Opretholdelse

Regular maintenance ensures the longevity and safe operation of your fireplace insert. Always turn off the gas supply and allow the unit to cool completely before performing any maintenance.

Rensning:

Tør udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler.
Periodically inspect the ceramic logs for any damage or soot buildup. Clean gently with a soft brush if necessary.
Sørg for, at luftindtag og udstødningsventiler er fri for blokeringer.

Årlig inspektion:

It is recommended to have a qualified service technician inspect your fireplace insert annually to ensure all components are functioning correctly and safely.

Fejlfinding

If your fireplace insert is not operating as expected, consult the following common issues before contacting customer support.

No Ignition/Pilot Light Issues:

Sørg for, at gasforsyningen er tændt.
Check if the AAA battery for the Piezo ignition is correctly installed and has sufficient charge.
Verify that the control knob is set to the 'PILOT' position during ignition attempts.

Fjernbetjeningen reagerer ikke:

Kontrollér batteriet i fjernbetjeningen, og udskift det om nødvendigt.
Ensure the remote receiver is set to 'REMOTE' mode (not 'ON' or 'OFF' for manual operation).
Confirm the remote is within range and there are no obstructions between the remote and the receiver.

Enheden slukker uventet:

The Oxygen Depletion Sensor (ODS) may have activated due to low oxygen levels. Ensure adequate ventilation in the room.
In thermostat mode, the unit will turn off once the set temperature is reached.

Video: Fireplace Remote Control Troubleshooting

This video demonstrates basic troubleshooting for the remote control of a Duluth Forge gas fireplace insert.

Specifikationer

Feature	Detalje
Mærke	Duluth Forge
Modelnummer	FDI32R
Strømkilde	Gasdrevet (naturgas eller flydende propan)
Varmeoutput	32,000 britiske termiske enheder
Varmedækning	Op til 1,500 kvadratmeter
Produktmål (D x B x H)	18.38 cm x 33.27 cm x 36.38 cm
Varens vægt	88.2 lbs
Materiale	Ceramic, Metal
Farve	Sort
Installationstype	Built-In (Zero Clearance)
Ventilationstype	Vent fri
Speciel funktion	Justerbar termostat, iltforbrugssensor (ODS)
Inkluderede komponenter	Burner, Remote Control, 9 Ceramic Logs

Diagram showing the dimensions of the fireplace insert: 18.38 inches Depth, 33.27 inches Height, 36.38 inches Length. — Produktdimensioner til installationsplanlægning.

Garantioplysninger

This Duluth Forge fireplace insert comes with a Begrænset garanti. For specific details regarding coverage, duration, and terms, please refer to the warranty card included with your product or contact customer support.

Kundesupport

For technical assistance, parts, or warranty inquiries, please contact the manufacturer:

Fabrikant: Fabrikken køber direkte

Please have your model number (FDI32R) and purchase information ready when contacting support.