Compustar Alarm Add-on Kit User Manual

1. Introduktion og overview

The Compustar ALARM IT KIT is an essential add-on for compatible Compustar remote start systems, designed to significantly enhance vehicle security.

It features a Dual-Axis Sensor (DAS) that provides two stages of impact detection, a tilt sensor to identify towing attempts or tire theft, and a built-in accelerometer for manual transmission safety. The system also includes a high-decibel siren and a visible Compustar-Blue LED deterrent.

2. Produktfunktioner

Dual-Axis Sensor (DAS): Detects two stages of impact, triggering the alarm and alerting the user via 2-way LCD remote or DroneMobile.
Tilt Sensor: Notifies the user if the vehicle is being towed or if tires are being stolen.
Built-in Accelerometer: Enhances safety for manual transmission vehicles by immediately stopping the vehicle if remote started while in gear.
High-Decibel 6-Tone Siren: Provides a loud audible deterrent upon alarm activation.
Compustar-Blue LED: A visible deterrent indicating the vehicle is protected.
Kompatibilitet: Designed to integrate with Compustar FT-7200S-CONT remote start systems.

3. Opsætning og installation

Installation of the ALARM IT KIT requires integration with an existing or new Compustar remote start system. Due to the complexity of vehicle security systems and the need for specific system flashing, professional installation by an authorized Compustar dealer is highly recommended.

Vigtige overvejelser:

This kit is compatible with CompuStar FT-7200S-CONT remote start systems. Verify compatibility with your specific system before installation.
The remote start system will likely require a firmware update or "flashing" to recognize and properly integrate the ALARM IT KIT. This process typically requires specialized tools and software available to authorized installers.
Ensure all wiring connections are secure and properly insulated to prevent electrical issues.

Compustar Alarm Add-on Kit components including the main module, siren, and wiring harness.

Figure 3.1: Components of the Compustar ALARM IT KIT, showing the main control module, the siren, and associated wiring.

4. Betjeningsvejledning

Once properly installed and configured, the ALARM IT KIT operates in conjunction with your Compustar remote start system to provide enhanced security.

Tilkobling af systemet: The alarm system typically arms automatically when you lock your vehicle using your Compustar remote or the vehicle's factory remote (if integrated).
Påvirkningsregistrering: If the DAS sensor detects an impact, the siren will sound, and an alert will be sent to your 2-way LCD remote or DroneMobile app (if equipped).
Hældningsdetektion: If the vehicle's angle changes significantly (e.g., during towing or jacking), the tilt sensor will trigger the alarm and send an alert.
Manual Transmission Safety: For manual transmission vehicles, the built-in accelerometer acts as a safety mechanism. If the vehicle is remote started while left in gear, the system is designed to immediately shut down the engine to prevent unintended movement.
Visual Deterrent: The Compustar-Blue LED will flash when the system is armed, serving as a visual warning to potential thieves.

5. Vedligeholdelse

The Compustar ALARM IT KIT is designed for low maintenance. To ensure optimal performance and longevity:

Keep the main module and siren free from excessive dirt, dust, and moisture.
Periodically check all visible wiring connections for any signs of wear or looseness.
Avoid exposing the components to extreme temperatures outside of normal vehicle operating conditions.
Do not attempt to open or modify the sealed components, as this may void any applicable warranty.

6. Fejlfinding

If you experience issues with your ALARM IT KIT, consider the following common points:

Problem	Mulig årsag/løsning
Alarm not activating or no alerts received.	System may not be properly armed. Ensure your remote start system is armed. Incorrect wiring or loose connections. Inspect all connections. System firmware not updated. The main control module may need to be "flashed" by an authorized installer to recognize the ALARM IT KIT.
Falske alarmer.	Sensor sensitivity may be too high. An authorized installer can adjust the DAS sensor sensitivity. Improper mounting of the sensor. Ensure the sensor is securely mounted on a stable surface.
Manual transmission safety feature not working.	Accelerometer may not be calibrated or recognized. Professional diagnosis and flashing may be required. Compatibility issue with older remote start modules. Ensure your module is compatible with the DAS 2 sensor.

For persistent issues or complex diagnostics, it is strongly recommended to contact an authorized Compustar installer or a qualified automotive electronics technician.

7. Specifikationer

Feature	Detalje
Modelnummer	FT-ALARMIT-KIT V2
Varens vægt	1.28 pund
Produktdimensioner	8 x 6 x 3 tommer
Noise Level (Siren)	105 dB
Kompatibel enhed	CompuStar FT-7200S-CONT remote start systems
Batterier medfølger	Ingen
Batterier påkrævet	Ingen
Dato først tilgængelig	5. november 2015
Fabrikant	Førstehåndsteknologi

8. Garanti og support

Warranty coverage and technical support for Compustar products, including the ALARM IT KIT, are typically provided through authorized Compustar dealers and installers. Direct support from the manufacturer may require an installer account.

It is advisable to retain your proof of purchase and installation records. For any warranty claims or technical assistance, please contact the authorized installer who performed the installation of your Compustar system.

	Produktvejledning til Compustar RS1B-DC3 fjernstarter Omfattende produktguide til Compustar RS1B-DC3 fjernstartersystemet, der dækker installation, programmering, diagnosticering og fejlfinding.
	Produktvejledning og installation til Compustar RS1B-DC3 fjernstarter Omfattende produktguide til Compustar RS1B-DC3 fjernstarter. Lær om installation, programmeringsprocedurer, diagnosticering og fejlfinding for dit køretøj.
	CompuStar 2W9000FMR Brugervejledning: Funktioner, funktioner og sikkerhed Omfattende brugervejledning til CompuStar 2W9000FMR alarm- og fjernstartsystemet. Detaljer om knapfunktioner, systemindstillinger, diagnostiske meddelelser, betjening af manuel gearkasse og garantioplysninger.
	CompuStar Pro 2BSHLEDR Brugermanual - Firstech LLC Brugermanual til CompuStar Pro 2BSHLEDR 2-vejs 2-knaps LED-fjernstartersystem fra Firstech LLC. Dækker installation, betjening, funktioner, programmering og garanti.
	CompuStar P2W9000R & P2WSSR Fjernprogrammering og Anti-jacking-tilstand Brugermanual Omfattende guide til programmering af CompuStar P2W9000R og P2WSSR fjernbetjeninger, inklusive instruktioner til Anti Jacking-tilstand. Lær, hvordan du koder nye fjernbetjeninger og aktiverer panikfunktioner til dit køretøjs sikkerhedssystem.
	Compustar 2WSSR-T11 Lynstartguide: Fjernbetjeningsfunktioner og betjening En kortfattet vejledning til betjening af Compustar 2WSSR-T11 fjernbetjent bilstarter og nøglefri adgangssystem, med detaljerede oplysninger om knapfunktioner, menupunkter, batteriopladning og vigtige sikkerhedsoplysninger.

Compustar FT-ALARMIT-KIT V2