Keurig K140 Kaffemaskine Brugsanvisning

1. Produktet er slutview

The Keurig K140 is a versatile coffee maker designed for both commercial and personal use, compatible with K-Cup pods. It features a simple interface and a removable water reservoir for easy refilling and cleaning.

Figur 1: Forside view of the Keurig K140 Coffee Maker.

Key components include the water reservoir, K-Cup pod holder, control panel with brew size buttons, and a removable drip tray.

2. Opsætning

1. Pak bryggeren ud: Remove all packaging materials and place the brewer on a stable, level surface.
2. Skyl vandbeholderen: Vask vandbeholderen og dens låg med varmt sæbevand. Skyl grundigt og tør.
3. Fyld vandbeholderen: Fill the reservoir with fresh, filtered water up to the "MAX FILL" line. Place the lid back on the reservoir.
4. Tænd: Sæt bryggeren i en jordet stikkontakt. Tænd/sluk-knappen lyser.
5. Indledende rensende bryg:
   • Læg et stort krus på drypbakken.
   • Løft og sænk bryggerhåndtaget uden at isætte en K-Cup-kapsel.
   • Select the largest brew size.
   • Press the brew button. This will dispense hot water to clean the internal components. Discard the hot water.

Bryggeren er nu klar til brug.

3. Betjeningsvejledning

1. Sørg for vandstand: Check that the water reservoir has sufficient water for your desired brew size. Refill if necessary.
2. Indsæt K-Cup Pod: Lift the brewer handle. Place a K-Cup pod into the K-Cup pod holder. Lower the handle completely to close the lid.
3. Placer krus: Placer et krus eller en kop på drypbakken.
4. Vælg brygstørrelse: The control panel will display "READY TO BREW". Select your desired brew size using the illuminated buttons.
5. Begynd at brygge: Press the selected brew size button. The brewer will begin the brewing process.
6. Nyde: Once brewing is complete, carefully remove your mug. Lift the handle to eject the used K-Cup pod into the discard bin.

Forsigtighed: Do not remove the K-Cup pod holder during brewing. The K-Cup pod contains hot liquid and sharp needles.

4. Vedligeholdelse

Regular cleaning and maintenance ensure optimal performance and longevity of your Keurig K140 brewer.

4.1. Rengøring af drypbakken

• The drip tray can be easily removed for cleaning. Simply slide it out from the base of the brewer.
• Wash the drip tray and its cover with warm, soapy water. Rinse thoroughly and dry.
• Reinsert the drip tray into the brewer.

4.2. Rengøring af vandbeholderen

• Remove the water reservoir from the brewer.
• Wash with warm, soapy water. For thorough cleaning, a soft brush can be used.
• Rinse completely and dry before reattaching to the brewer.

4.3. Cleaning the K-Cup Pod Holder

• Lift the brewer handle. Grasp the top of the K-Cup pod holder and pull it upwards to remove it.
• Separate the funnel from the pod holder.
• Wash both parts with warm, soapy water. Pay attention to the exit needle inside the pod holder.
• Reassemble the pod holder and reinsert it into the brewer.

4.4. Afkalkning

Over time, calcium deposits (scale) can build up in your brewer. Descaling is important to maintain performance. Refer to the official Keurig website or your product's specific descaling instructions for the recommended procedure and descaling solution.

5. Fejlfinding

6. Specifikationer

7. Garanti og support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Keurig website. For technical support or service inquiries, please contact Keurig customer service directly.

Online ressourcer: www.keurig.com