ROLAND D-110 Digital Sound Module Instruction Manual

1. Introduktion

Tak for købetasing the ROLAND D-110 Digital Sound Module. The D-110 is a versatile rack-mount digital sound module featuring ROLAND's acclaimed LA (Linear Arithmetic) synthesis technology. It offers 32 voices of polyphony and 8-part multi-timbral capabilities, making it an ideal addition to any MIDI-based music production setup. This unit is designed for direct power connection.

This manual provides essential information for the proper setup, operation, and maintenance of your D-110. Please read it thoroughly before using the unit to ensure optimal performance and longevity.

Figur 1: Forside view of the ROLAND D-110 Digital Sound Module, showing controls and display.

2. Sikkerhedsoplysninger

For at sikre sikker drift og forhindre skader, bedes du overholde følgende forholdsregler:

• Strømforsyning: Brug kun den specificerede strømforsyning voltage. Sørg for, at strømkablet er korrekt tilsluttet og ikke er beskadiget.
• Beliggenhed: Place the unit on a stable, level surface. Avoid locations exposed to direct sunlight, extreme temperatures, high humidity, or excessive dust.
• Ventilation: Bloker ikke ventilationsåbningerne. Sørg for tilstrækkelig luftgennemstrømning omkring enheden for at forhindre overophedning.
• Fremmedobjekter: Do not allow liquids or foreign objects to enter the unit. If this occurs, disconnect the power immediately and contact qualified service personnel.
• Service: Do not attempt to service the unit yourself. Refer all servicing to qualified ROLAND service personnel.

3. Pakkens indhold

Kontroller venligst, at alle følgende varer er inkluderet i din pakke:

• ROLAND D-110 Digital Sound Module Unit
• AC strømkabel
• Brugermanual (dette dokument)

Hvis nogen dele mangler eller er beskadiget, bedes du straks kontakte din forhandler.

4. Opsætning

4.1 Tilslutning af strøm

1. Ensure the D-110's power switch is in the OFF position.
2. Connect the supplied AC power cable to the AC IN jack on the rear panel of the D-110.
3. Plug the other end of the power cable into a standard AC outlet.

4.2 Lydforbindelser

Connect the D-110's audio outputs to your mixer, amplifier, or audio interface using appropriate audio cables (not included).

• Hovedudgange (V/H): For stereo output.
• Individuelle output: The D-110 may feature individual outputs for routing specific parts to separate mixer channels. Refer to the rear panel for available jacks.

4.3 MIDI-forbindelser

To control the D-110 from a MIDI keyboard, sequencer, or computer, connect MIDI cables (not included) as follows:

• Connect the MIDI OUT of your controller/sequencer to the MIDI IN of the D-110.
• If you wish to send MIDI data from the D-110 (e.g., system exclusive data), connect the MIDI OUT of the D-110 to the MIDI IN of your receiving device.

5. Betjeningsvejledning

5.1 Tænd/sluk

• For at tænde: Ensure all connections are made, then press the POWER switch on the front panel. The display will illuminate.
• For at slukke: Tryk på POWER-kontakten igen.

5.2 Basic Sound Selection

The D-110 contains a variety of preset sounds (Tones). Use the front panel buttons and data entry controls to browse and select sounds.

1. Brug BANK buttons to select a sound bank (e.g., A, B, C, D).
2. Brug ANTAL knapperne eller VÆRDI dial to select a specific Tone within the bank.
3. The display will show the name of the selected Tone.

5.3 Multi-Timbral Mode (Performance Mode)

The D-110 can play up to 8 different sounds simultaneously, each assigned to a separate MIDI channel. This is known as Performance Mode.

1. Tryk på PRÆSTATION button to enter Performance Mode.
2. Brug DEL buttons to select the MIDI part you wish to edit.
3. Assign a Tone to each part and set its MIDI channel, volume, pan, and other parameters using the display and controls.
4. Save your custom performance settings to a user memory location.

5.4 Editing Tones and Performances

The D-110 offers extensive editing capabilities for Tones and Performances. Refer to the detailed sections in the full owner's manual for in-depth instructions on parameter editing, effects, and saving your custom sounds.

6. Vedligeholdelse

6.1 Rengøring

• Tør enhedens yderside af med en blød, tør klud.
• For genstridigt snavs, brug en let damp klud og tør derefter af.
• Brug ikke slibende rengøringsmidler, voks eller opløsningsmidler, da disse kan beskadige finishen.

6.2 Opbevaring

When storing the D-110 for extended periods, ensure it is powered off and disconnected from the AC outlet. Store it in a cool, dry place away from direct sunlight and extreme temperatures.

7. Fejlfinding

If the problem persists after trying these solutions, please contact ROLAND customer support or a qualified service center.

8. Specifikationer

• Model: ROLAND D-110
• Sound Generation: LA (Linear Arithmetic) Synthesis
• Polyfoni: 32 Stemmer
• Multi-timbral Parts: 8
• Hukommelse: Internal Tones, Performances, and User Memory (expandable with memory card, e.g., KV-211 if included)
• Forbindelser: MIDI IN/OUT/THRU, Audio Outputs (L/R, possibly individual), AC IN
• Strømforsyning: Direct AC connection
• Dimensioner: Standard 1U rack-mount size (specific dimensions may vary slightly)
• Vægt: (Information not provided, refer to product packaging)

Specifikationerne kan ændres uden varsel.

9. Garanti og support

ROLAND products are covered by a limited warranty. Please refer to the warranty card included with your product or visit the official ROLAND webwebstedet for detaljerede garantivilkår og -betingelser, der er specifikke for din region.

For technical support, service, or inquiries, please contact your local ROLAND distributor or authorized service center. Contact information can typically be found on the ROLAND official webwebsted: www.roland.com/global/support/