Soundbot SB210 HD Stereo Bluetooth Beanie User Manual

Indledning

Tak for købetasing the Soundbot SB210 HD Stereo Bluetooth Beanie. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

Sikkerhedsoplysninger

• Udsæt ikke enheden for ekstreme temperaturer eller fugt.
• Keep the device away from water and liquids, except when the electronic components are removed for washing.
• Forsøg ikke at skille enheden ad eller ændre den. Dette vil ugyldiggøre garantien.
• Brug kun det medfølgende opladningskabel eller et tilsvarende certificeret kabel.
• Undgå at lytte ved høj lydstyrke i længere perioder for at forhindre høreskader.

Pakkens indhold

• Soundbot SB210 HD Stereo Bluetooth Beanie
• Micro USB opladningskabel
• Brugermanual

Produkt overview

The Soundbot SB210 integrates Bluetooth audio technology into a comfortable beanie, allowing for wireless music playback and hands-free calling.

Image: The Soundbot SB210 Beanie featuring its integrated control panel on the side.

Kontrolpanel funktioner

• Afspil/pause knap: Tænd/sluk, afspil/pause musik, besvar/afslut opkald.
• Knap til lydstyrke op (+): Increase volume (short press), next track (long press).
• Knap til lydstyrke ned (-): Decrease volume (short press), previous track (long press).
• Mikrofon: Til håndfri opkald.
• Micro USB -port: Til opladning af det interne batteri.

Opsætning

1. Charging the Beanie

Before initial use, fully charge the beanie. Locate the Micro USB charging port on the control panel. Connect the provided Micro USB cable to the port and the other end to a USB power source (e.g., wall adapter, computer USB port). The LED indicator will show charging status. A full charge typically takes approximately one hour and provides a full day of playback.

Image: The Micro USB charging port integrated into the beanie's control panel.

2. Parring med en Bluetooth-enhed

1. Ensure the beanie is charged and turned off.
2. Press and hold the Play/Pause button on the control panel until the LED indicator flashes red and blue alternately. This indicates the beanie is in pairing mode.
3. Gå til Bluetooth-indstillingerne på din Bluetooth-aktiverede enhed (smartphone, tablet osv.) og aktiver Bluetooth.
4. Søg efter available devices. You should see "SB210" or "Soundbot Beanie" in the list.
5. Select "SB210" to connect. Once successfully paired, the LED indicator will typically show a solid blue light or flash blue slowly.

3. Wearing the Beanie

Place the beanie on your head, ensuring the integrated speakers are positioned comfortably over your ears. The beanie is designed to stay securely in place during various activities.

Betjeningsvejledning

1. Tænd/sluk

• Tænd: Press and hold the Play/Pause button for approximately 3 seconds until the LED indicator lights up.
• Sluk: Press and hold the Play/Pause button for approximately 3 seconds until the LED indicator turns off.

2. Musikafspilning

• Afspil/pause: Tryk kort på Play/Pause-knappen.
• Næste nummer: Tryk længe på knappen Lydstyrke op (+).
• Forrige nummer: Tryk længe på lydstyrke ned-knappen (-).

3. Lydstyrkekontrol

• Forøg lydstyrke: Tryk kort på knappen Lydstyrke op (+).
• Skru ned for lydstyrken: Tryk kort på lydstyrke ned-knappen (-).

4. Håndfri opkald

The integrated microphone allows for hands-free communication when paired with your smartphone.

• Besvar/afslut opkald: Tryk kort på Play/Pause-knappen.
• Afvis opkald: Tryk længe på Afspil/Pause-knappen.
• Genopkald sidste nummer: Dobbelttryk på Play/Pause-knappen.

Opretholdelse

1. Vaskeanvisning

The beanie is washable, but the electronic components must be removed first.

1. Locate the zipper on the inside lining of the beanie.
2. Unzip the lining and gently pull out the internal speakers and control module, which are typically held in place by Velcro. Be careful not to pull too hard on the connecting wires.
3. Once the electronic components are removed, the beanie can be machine washed according to the fabric care instructions (100% Acrylic, Machine Wash).
4. Allow the beanie to dry completely before reinserting the electronic components.
5. Carefully reinsert the speakers and control module, ensuring they are properly positioned over the ears, and secure them with the Velcro. Zip up the lining.

Image: The internal speaker component that needs to be removed before washing.

2. Opbevaring

Store the beanie in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

Fejlfinding

• Enheden tændes ikke: Ensure the beanie is fully charged. Connect it to a power source using the Micro USB cable.
• Kan ikke parres med Bluetooth-enhed:
  • Ensure the beanie is in pairing mode (LED flashing red and blue).
  • Sørg for, at Bluetooth er aktiveret på din enhed, og at den er inden for rækkevidde (op til 33 meter).
  • Try turning off and on both the beanie and your Bluetooth device.
  • Ryd tidligere Bluetooth-forbindelser på din enhed, og prøv at parre igen.
• Ingen lyd eller lav lydstyrke:
  • Check the volume levels on both the beanie and your connected device.
  • Ensure the beanie is properly paired and connected.
  • Verify that the speakers are correctly positioned over your ears.
• Blue LED flashes during use: This is normal behavior indicating the Bluetooth connection is active.

Specifikationer

Garanti og support

Soundbot products are designed and manufactured to the highest quality standards. For specific warranty details and support, please refer to the warranty card included with your purchase or visit the official Soundbot webwebsted.

Officiel Webwebsted: www.SoundBot.com