Redcat Racing HX-N802

Redcat Racing HX-N802 Hexfly NiMH/NiCd Battery Charger Instruction Manual

Model: HX-N802

1. Introduktion

This manual provides essential information for the safe and efficient operation of your Redcat Racing HX-N802 Hexfly NiMH/NiCd Battery Charger. Please read these instructions thoroughly before use and retain for future reference.

The Redcat Racing HX-N802 is an AC charger designed for 4-8 cell NiMH/NiCd battery packs, capable of charging at up to 2A (2000mA). It is a genuine Redcat Racing replacement part, ensuring optimal performance with your Redcat Racing vehicles.

Redcat Racing HX-N802 Hexfly NiMH/NiCd Battery Charger

Image: Redcat Racing HX-N802 Hexfly NiMH/NiCd Battery Charger. This image shows the compact blue charger unit with its power cord and battery connector.

2. Sikkerhedsforanstaltninger

  • VIGTIG: This charger is compatible only with NiMH/NiCd batteries. DO NOT use with LiPo batteries. Using the charger with incompatible battery types can lead to serious hazards, including fire or explosion.
  • Always supervise charging batteries.
  • Oplad batterier i et godt ventileret område, væk fra brandfarlige materialer.
  • If the charger or battery becomes excessively hot during charging, disconnect immediately.
  • Opbevares utilgængeligt for børn.
  • Do not attempt to open or modify the charger.

3. Opsætning

Before connecting your battery, ensure the charger is placed on a stable, non-flammable surface.

  1. Tilslut strøm: Plug the charger's AC power cord into a standard wall outlet. The charger's LED indicator may briefly illuminate.
  2. Vælg ladestrøm: The HX-N802 may offer selectable charging currents (e.g., 0.9A or 1.8A). Choose the appropriate current for your battery pack. Refer to your battery's specifications for recommended charging rates. A lower current is generally safer for smaller capacity batteries.
  3. Tilslut batteri: Connect your NiMH/NiCd battery pack to the charger's output connector. Ensure a secure connection.

Video: This video demonstrates the setup and operation of a universal smart charger compatible with NiMH/NiCd batteries, showing how to connect the battery, use the temperature sensor, and interpret LED indicators for charging status and current selection.

4. Betjeningsvejledning

Once the battery is connected and power is supplied, the charger will begin the charging process. The LED indicators provide status updates:

  • Rød LED (konstant): Angiver, at batteriet oplades i øjeblikket.
  • Grøn LED (konstant): Indicates the battery is fully charged. The charger will automatically stop charging to prevent overcharging.
  • Red LED (Flashing) / No LED: May indicate a battery detection issue or an error. Refer to the Troubleshooting section.

The charger features a peak detection system to ensure optimal charging and prevent overcharging of NiMH/NiCd batteries.

5. Vedligeholdelse

  • Hold opladeren ren og fri for støv og snavs. Brug en blød, tør klud til rengøring.
  • Opbevar opladeren på et køligt, tørt sted, når den ikke er i brug.
  • Regularly inspect the power cord and battery connectors for any signs of damage. Do not use if damaged.

6. Fejlfinding

Problem Mulig årsag Løsning
Charger LED stays red or does not light up after connecting battery. Battery not detected, faulty connection, or battery issue.
  • Sørg for, at batteriet er tilsluttet korrekt til opladeren.
  • Verify the charger is properly plugged into a working power outlet.
  • Check the battery for any visible damage.
  • Confirm the battery type is NiMH/NiCd and within the 4-8 cell range.
Battery or charger becomes very hot during charging. Overcharging, internal battery fault, or incorrect charging current.
  • Immediately disconnect the battery and charger.
  • Lad komponenterne køle af.
  • Ensure the correct charging current is selected for your battery.
  • Do not use a damaged or excessively hot battery.

7. Specifikationer

Feature Detalje
Modelnummer HX-N802
Batterikompatibilitet NiMH/NiCd (4-8 cell packs)
Udgangsstrøm Up to 2A (2000mA)
Udgang Voltage 10 volt
Produktdimensioner 3.5 x 2.5 x 1.25 tommer
Varens vægt 7.2 ounce
Producent anbefalet alder 14 år og opefter

8. Garanti og support

Redcat Racing is committed to providing quality products and support. For assistance with your HX-N802 charger or any Redcat Racing product, please contact our support personnel. Redcat Racing is located in the United States and has a full staff of support personnel to help you.

Always use genuine Redcat Racing replacement parts to ensure the best performance and compatibility with your vehicles and accessories.

For further details, please consult your vehicle manual or visit the official Redcat Racing webwebsted: www.redcatracing.com

© 2024 Redcat Racing. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.