1. Introduktion
This manual provides essential information for the proper installation, operation, and maintenance of your AXA Blueline 80 Rear Light. Please read this manual thoroughly before using the product to ensure safe and efficient operation. The Blueline Steady is designed to fit lighter and slimmer looking bikes perfectly, offering reliable rear illumination.
2. Sikkerhedsoplysninger
- Sørg altid for, at lygten er sikkert monteret, inden du kører.
- Regularly check the light for damage or loose connections.
- Do not attempt to disassemble the light housing, as this may void the warranty and compromise water resistance.
- Ensure the light is clean and free from obstructions to maintain optimal visibility.
- This light is designed for bicycle use only.
3. Pakkens indhold
Bekræft at alle komponenter er til stede i pakken:
- AXA Blueline 80 Rear Light (1 unit)
- Mounting hardware (if applicable, typically integrated with luggage rack mount)
4. Opsætning og installation
The AXA Blueline 80 Rear Light is designed for mounting on a bicycle's luggage rack and is dynamo-powered. Ensure your bicycle has a compatible dynamo system (hub or side dynamo).
4.1 Montering af baglygten
- Identify the mounting points on your bicycle's luggage rack. The Blueline 80 typically uses an 80mm bolt spacing for mounting.
- Align the light with the mounting holes on the luggage rack.
- Secure the light using appropriate screws and nuts (not always included, may use existing rack hardware). Ensure the light is firmly attached and does not wobble.
Billede: Side view of the AXA Blueline 80 Rear Light securely mounted on a bicycle's luggage rack, demonstrating its slim profile og integration.
Billede: Bagside view of the AXA Blueline 80 Rear Light installed on a bicycle, highlighting the integrated reflector and the light's position for optimal visibility.
4.2 Electrical Connection (Dynamo)
The Blueline 80 is dynamo-powered. Connect the light to your bicycle's dynamo system:
- Locate the power input terminals on the rear light, typically at the bottom. These are usually marked with '+' and '-' or similar indicators.
- Connect the positive wire from your dynamo to the '+' terminal of the light.
- Connect the negative (ground) wire from your dynamo to the '-' terminal of the light.
- Sørg for, at alle forbindelser er sikre og beskyttet mod fugt.
Billede: Forside view of the AXA Blueline 80 Rear Light, illustrating its design and the integrated reflector for passive safety.
5. Betjeningsvejledning
The AXA Blueline 80 Rear Light operates automatically once connected to a functioning dynamo system.
5.1 Automatisk drift
- The light features an automatic light/dark sensor. It will activate automatically when ambient light levels are low and the bicycle is in motion (generating power from the dynamo).
- The light includes a 'Steady' function, which keeps the light illuminated for approximately 4 minutes when the bicycle is standing still, providing continued visibility at stops.
Image: The AXA Blueline 80 Rear Light in operation, demonstrating its bright red LED illumination for enhanced visibility.
6. Vedligeholdelse
The AXA Blueline 80 Rear Light is designed for low maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Rensning: Tør lampens overflade af med en blød kludamp klud til at fjerne snavs og skidt. Undgå slibende rengøringsmidler eller opløsningsmidler.
- LED levetid: The high-power LED light has a lifespan of more than 50,000 hours, meaning replacement is generally not required under normal use.
- Vandtæthed: The light is water-resistant (IP65 rated). While it can withstand splashes and rain, avoid submerging it in water.
- Forbindelser: Periodically check the electrical connections to the dynamo to ensure they remain secure and free from corrosion.
7. Fejlfinding
If you experience issues with your AXA Blueline 80 Rear Light, consult the following table:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power from dynamo; loose electrical connection; ambient light too high. | Ensure bicycle is in motion; check dynamo function; verify all electrical connections are secure; test in darker conditions. |
| Lyset er svagt eller flimrer. | Insufficient power from dynamo; poor electrical connection; dirt on light surface. | Ensure consistent speed for dynamo; check and clean electrical contacts; clean the light's lens. |
| Light does not stay on when stopped. | Issue with the 'Steady' function capacitor or circuit. | Hvis problemet fortsætter efter kontrol af strømmen, skal du kontakte kundesupport. |
8. Specifikationer
Key technical specifications for the AXA Blueline 80 Rear Light:
| Feature | Detalje |
|---|---|
| Modelnavn | Blueline 80 |
| Varenummer | LAA030 |
| Farve | Rød |
| Materiale | Plast |
| Strømkilde | Dynamo Powered (Hub and Side Dynamo compatible) |
| Lysstyrke | 50 Lux (front light equivalent, for rear light this refers to intensity) |
| Vandmodstandsniveau | Vandtæt (IP65) |
| Varens vægt | 60 gram |
| Produktmål (LxBxH) | 10 cm x 3 cm x 3 cm (3.94" x 1.18" x 1.18") |
| Monteringstype | Luggage Rack Mount (80mm bolt spacing) |
| Særlige funktioner | Steady light (4 minutes when standing still), Automatic light/dark sensor, Integrated retro reflector |
| LED levetid | Mere end 50,000 timer |
9. Garanti og support
9.1 Garantioplysninger
The AXA Blueline 80 Rear Light comes with a 2 års producentgarantiDenne garanti dækker defekter i materialer og udførelse under normal brug. Den dækker ikke skader som følge af misbrug, ulykker, uautoriserede ændringer eller normal slitage. Gem venligst din købsbevis i tilfælde af garantikrav.
9.2 Kundesupport
For technical assistance, warranty claims, or further inquiries, please contact your retailer or the official AXA customer support channels. Refer to the AXA webhjemmeside for de mest opdaterede kontaktoplysninger.