MEAN WELL LRS-350-24

MEAN WELL LRS-350-24 Power Supply User Manual

Model: LRS-350-24

1. Introduktion

This manual provides essential information for the safe and efficient operation of the MEAN WELL LRS-350-24 Single Output Switchable Power Supply. Please read this manual thoroughly before installation and use.

MEAN WELL LRS-350-24 Power Supply

Figure 1: MEAN WELL LRS-350-24 Power Supply. This image shows the enclosed power supply unit with its ventilation grille, terminal block, and model label.

2. Sikkerhedsoplysninger

  • Sørg for korrekt jording for at forhindre elektrisk stød.
  • Brug ikke enheden i våde eller dråber.amp forhold.
  • Bekræft input voltage selection switch (115VAC/230VAC) is set correctly before connecting to power. Incorrect setting can cause damage.
  • Installation skal udføres af kvalificeret personale.
  • Åbn ikke strømforsyningen casing; der er ingen dele indeni, som kan serviceres af brugeren.
  • Sørg for tilstrækkelig ventilation for at forhindre overophedning.
  • Afbryd strømmen, før du udfører vedligeholdelse eller ændringer i ledninger.

3. Produktet er slutview

3.1 Funktioner

  • AC input range selectable by a switch.
  • Withstands 300 VAC surge input for 5 seconds.
  • No load power consumption below 0.75W.
  • 1U lav profile design.
  • High operating temperature, up to 70°C.
  • Beskyttelser: Kortslutning, Overbelastning, Over voltage, Over temperature.
  • Built-in cooling fan with ON-OFF control.
  • Compliance to UL 60950-1.
  • Withstands 5G vibration test.
  • High efficiency, long life, and high reliability.
  • LED indicator for power on status.
  • 100 % fuld belastning indbrændingstest.
  • 3 års garanti.

3.2 Ansøgninger

  • Industrial automation machinery.
  • Industrial control systems.
  • Mechanical and electrical equipment.
  • Electronic instruments, equipment, or apparatus.
MEAN WELL LRS-350 Series Features and Applications

Figur 2: Overview of LRS-350 series features and typical applications. This image displays a summary of the power supply's capabilities and suitable uses.

4. Opsætning og installation

4.1 Kontrol før installation

Before installation, ensure the power supply is undamaged and that all necessary components are available. Verify the input voltage requirement of your application matches the power supply's capabilities.

4.2 AC-indgang Voltage Valg

The LRS-350-24 features an AC input range selectable by a switch. Locate the switch on the side of the unit. Set it to either 115VAC (for 90-132VAC input) or 230VAC (for 180-264VAC input) according to your local mains voltage. Failure to set this correctly can result in damage to the unit.

4.3 Ledningsforbindelser

Connect the power supply using the screw terminal block. Refer to the mechanical specification diagram for terminal assignments.

  • AC-indgang: Connect Live (L), Neutral (N), and Ground (FG) to the corresponding input terminals.
  • DC-udgang: Connect the positive (+) and negative (-) load wires to the DC OUTPUT terminals.
MEAN WELL LRS-350 Series Mechanical Specification and Terminal Assignments

Figure 3: Mechanical dimensions and terminal block assignments for the LRS-350 series. This diagram provides physical measurements and pinout details for wiring.

4.4 Montering

Mount the power supply in a location that allows for adequate airflow around the unit, especially near the cooling fan. Use appropriate screws and mounting points as indicated in the mechanical specification diagram.

5. Betjeningsvejledning

5.1 Tænd

After ensuring all connections are secure and the AC input voltage switch is correctly set, apply AC power. The LED indicator on the unit will illuminate, indicating that the power supply is operational.

5.2 Udgang Voltage Justering

Output voltage can be finely adjusted using the potentiometer located near the output terminals. Use a small screwdriver to carefully turn the potentiometer to achieve the desired output voltage within the specified range (typically 21.6V to 28.8V for the 24V model).

5.3 Køleventilatorens drift

The built-in cooling fan operates with ON-OFF control, activating automatically when the internal temperature reaches a certain threshold to maintain optimal operating conditions. It will turn off when the temperature drops.

6. Vedligeholdelse

The LRS-350-24 power supply is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure optimal performance.

  • Rensning: Ensure ventilation openings are free from dust and debris. Use a soft, dry cloth or compressed air to clean the exterior. Do not use liquid cleaners.
  • Forbindelser: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de forbliver stramme og sikre.
  • Miljø: Maintain the operating environment within specified temperature and humidity ranges to prolong the unit's lifespan.

7. Fejlfinding

ProblemMulig årsagLøsning
Ingen output voltage / LED off
  • Ingen AC-indgangsstrøm.
  • Incorrect AC input voltage-switchindstilling.
  • Short circuit or overload on output.
  • Intern fejl.
  • Kontroller vekselstrømskilden og tilslutningerne.
  • Verify AC input switch (115VAC/230VAC) is correct.
  • Afbryd belastningen og kontroller for kortslutninger.
  • Hvis problemet fortsætter, kontakt support.
Udgang voltage too low or unstable
  • Overbelastningstilstand.
  • Udgang voltage adjustment incorrect.
  • Reduce load or use a higher-rated power supply.
  • Juster output voltaget potentiometer.
Fan is loud or constantly running
  • Høj omgivelsestemperatur.
  • Heavy load causing internal heat.
  • Støvophobning i ventilator.
  • Sørg for tilstrækkelig ventilation.
  • Verify load is within specifications.
  • Clean fan and vents.

8. Specifikationer

Detailed electrical and mechanical specifications for the MEAN WELL LRS-350-24 power supply.

MEAN WELL LRS-350 Series Detailed Specifications Table

Figure 4: Comprehensive specification table for the LRS-350 series, including input, output, protection, and environmental data.

ParameterVærdi
ModelLRS-350-24
Primary Output Voltage (VDC)24
Udgangsstrøm (A)14.6
Maksimal udgangseffekt (W)350.4
Input bindtage (VAC)90 to 132 / 180 to 264 (selectable)
Indgangsfrekvens (Hz)47 til 63
Maksimal indgangsstrøm (A)6.8
UdgangsstiktypeSkrueklemmeblok
Antal udgange1
FormfaktorVedlagt
Produktmål (L x B x H)8.46 x 1.18 x 4.53 tommer
Varens vægt1.64 pund
AfkølingsmetodeAir (Built-in fan)
DriftstemperaturOp til 70°C
BeskyttelserKortslutning, Overbelastning, Over voltage, over temperatur
OverholdelseUL 60950-1
Garanti3 år
MEAN WELL LRS-350 Series Block Diagram and Performance Curves

Figure 5: Block diagram illustrating the internal structure and performance curves (derating, static characteristics) of the LRS-350 series.

9. Garanti og support

The MEAN WELL LRS-350-24 power supply comes with a 3 års garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For technical support, warranty claims, or service inquiries, please contact your authorized MEAN WELL distributor or reseller. Do not attempt to repair the unit yourself, as this will void the warranty and may pose safety risks.

© 2025 MEAN WELL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.