Neewer NW910 I-TTL HSS Speedlight Flash User Manual

1. Introduktion

Thank you for choosing the Neewer NW910 I-TTL HSS Speedlight Flash. This powerful and versatile flash unit is designed to enhance your photography with advanced features such as I-TTL automatic flash, High-Speed Sync (HSS) up to 1/8000s, and Master/Slave capabilities. Its intuitive LCD display ensures ease of use for both beginners and experienced photographers.

Note: Camera is not included. This flash is not compatible with Nikon D50, DX1, DX2 cameras.

2. Sikkerhedsoplysninger

• Du må ikke selv skille blitzenheden ad eller forsøge at reparere den. Overlad al service til kvalificeret personale.
• Hold blitzenheden tør. Udsæt den ikke for regn eller fugt.
• Do not touch the flash tube after firing, as it can be hot.
• Use only specified batteries (4x AA alkaline or Ni-MH batteries). Do not mix old and new batteries or different types of batteries.
• Remove batteries if the flash will not be used for an extended period.
• Undgå direkte eksponering for blitzen i øjnene, især på tæt hold, da det kan forringe synet.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 x Neewer NW910 Speedlight Flash
• 1 x Soft Flash Diffuser
• 1 x Hard Flash Diffuser
• 1 x Mini-stativ
• 1 x beskyttelsespose
• 1 x Brugermanual (dette dokument)

Image: Neewer NW910 Speedlight Flash and its retail box, showing the flash unit and packaging.

Image: Neewer NW910 Speedlight Flash shown alongside its black protective pouch.

4. Produktet er slutview

Familiarize yourself with the main components and controls of your NW910 Speedlight Flash.

Billede: Forside og bagside views of the Neewer NW910 Speedlight Flash. The back view clearly shows the LCD display and control buttons.

Hovedkomponenter:

• Blitzhoved: Rotates and tilts for bounce flash.
• Built-in Wide Panel & Bounce Card: Located within the flash head.
• LCD-skærm: Viser aktuelle indstillinger og tilstande.
• Kontrolknapper: MODE, ZOOM, OK, Left/Right/Up/Down navigation, ON/OFF, REMOTE/MASTER.
• Hot Shoe: For mounting onto a camera or stand.
• Batterirum: Holder 4 AA-batterier.
• PC-synkroniseringsport: For wired connection to a camera or trigger.
• Ekstern strømport: For connecting an external power pack (e.g., CP-E4, not included).

5. Opsætning

5.1 Batteriinstallation

1. Åbn batteridækslet på siden af ​​blitzenheden.
2. Insert four (4) AA alkaline or Ni-MH batteries, ensuring correct polarity (+/-).
3. Luk batterirummets dæksel forsvarligt.

5.2 Montering på kamera

1. Ensure your camera and the flash unit are both powered off.
2. Skub blitzens hot shoe ind i kameraets hot shoe-fatning.
3. Tighten the locking knob on the flash unit to secure it firmly to the camera.

Image: The Neewer NW910 Speedlight Flash securely mounted on the hot shoe of a Nikon DSLR camera.

5.3 Tænd/sluk

Tryk og hold på ON/OFF button for a few seconds to power the flash unit on or off. The LCD screen will illuminate upon power-on.

6. Driftstilstande

Tryk på MODE button to cycle through the available flash modes: TTL, M (Manual), RPT (Multi), HSS (High-Speed Sync), MASTER, SLAVE (S1/S2).

Image: The Neewer NW910 Speedlight Flash LCD display showing various operating modes, including S1, RPT (Multi), and TTL, with corresponding settings.

6.1 TTL (Through-The-Lens) Mode

In TTL mode, the flash output is automatically controlled by the camera's metering system to achieve optimal exposure. This is ideal for quick shooting and changing light conditions.

• Trykke MODE until "TTL" appears on the LCD.
• Flash Exposure Compensation (FEC) can be adjusted using the navigation buttons to fine-tune exposure.

6.2 Manual (M) Mode

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Trykke MODE until "M" appears on the LCD.
• Use the navigation buttons to adjust the flash power level.

6.3 Multi (RPT) Mode

Multi mode (also known as Repeating Flash) fires the flash multiple times during a single exposure, creating stroboscopic effects. You can set the flash output, number of flashes, and frequency (Hz).

• Trykke MODE until "RPT" appears on the LCD.
• Use the navigation buttons to set flash power, flash count, and frequency.

6.4 Højhastighedssynkronisering (HSS)

HSS allows the flash to synchronize with shutter speeds faster than the camera's normal sync speed (up to 1/8000s). This is useful for freezing fast motion or using wide apertures in bright conditions.

• HSS is typically activated automatically when the camera's shutter speed exceeds the normal sync speed while in TTL or M mode, provided the camera supports HSS.
• Ensure your camera's settings are configured for HSS if required.

6.5 Mastertilstand

In Master mode, the NW910 can wirelessly control other compatible slave flash units (e.g., other NW910 units) using optical pulse signals. You can control up to 3 slave groups (A, B, C).

• Trykke REMOTE/MASTER button to switch to Master mode.
• Use the navigation buttons to set the mode and power for each slave group.

6.6 Slave Modes (S1/S2)

The NW910 can function as an optical slave unit, triggered by another flash.

• S1 tilstand: The flash fires in response to the first flash from a master unit. Suitable for manual flash.
• S2 tilstand: The flash ignores the pre-flash from a master unit and fires on the main flash. Suitable for TTL flash systems that use a pre-flash.
• Trykke MODE until "SLAVE" appears, then use navigation to select S1 or S2.

6.7 Zoomfunktion

The flash head's zoom position can be set automatically or manually to match the lens focal length, optimizing light coverage.

• Tryk på ZOOM knap.
• Use the navigation buttons to select Auto Zoom or Manual Zoom (18-180mm).

6.8 Bounce Flash (Head Rotation)

The flash head can be rotated horizontally (0-360 degrees) and tilted vertically (-7 to 90 degrees) to bounce light off ceilings or walls, creating softer, more natural illumination.

Image: A diagram illustrating the horizontal and vertical rotation capabilities of the Neewer NW910 Speedlight Flash head.

6.9 AF Assist Beam

The built-in AF assist beam helps the camera achieve focus in low-light conditions. It activates automatically when needed.

6.10 Strømbesparende tilstand

The flash unit enters power-saving mode after a period of inactivity to conserve battery life. It can be woken up by pressing any button or firing the camera shutter.

6.11 Overophedningsbeskyttelse

To prevent damage from continuous high-power firing, the flash unit features overheat protection. If the unit becomes too hot, it will temporarily disable firing until it cools down.

7. Using Diffusers

The NW910 comes with both a soft and a hard flash diffuser to modify the light quality.

Image: The Neewer NW910 Speedlight Flash shown with both the soft dome diffuser and the hard plastic diffuser attached to the flash head.

7.1 Soft Flash Diffuser

The soft diffuser is a compact, portable accessory that slides over the flash head. It diffuses and softens the light, reducing harsh shadows and creating a more even illumination.

7.2 Hard Flash Diffuser

The hard diffuser helps to reduce and soften harsh shadows behind the subject and minimizes red-eye effect. It disperses and softens the light for a more balanced and uniform distribution.

8. Vedligeholdelse

8.1 Rengøring

• Brug en blød, tør klud til at rengøre blitzenheden.
• Til genstridigt snavs, brug en let tør kludampened with water and a mild detergent, then wipe dry immediately.
• Do not use organic solvents such as alcohol or thinner.
• Clean the hot shoe contacts periodically with a clean, dry cloth to ensure good electrical connection.

8.2 Opbevaring

• Store the flash unit in a cool, dry place, away from direct sunlight and high humidity.
• Fjern batterierne, hvis de opbevares i længere tid, for at forhindre lækage.
• Use the provided protective pouch for storage and transport.

9. Fejlfinding

10. Specifikationer

11. Garanti og support

Neewer products are designed and manufactured to high-quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Neewer webwebstedet. Behold din købskvittering som købsbevis.