Galcon 8118 AC-GQ8 8-Station Indoor Controller User Manual

Indledning

The Galcon 8118 AC-GQ8 is an advanced indoor irrigation and low voltage lighting controller designed for efficient management of your watering and lighting systems. This controller supports up to 8 stations, configurable as 8 irrigation zones or 7 irrigation zones plus 1 low voltage lighting zone. It offers flexible programming options including daily, odd, even, and cyclic schedules, along with a dedicated program for low voltage applikationer.

Image: The Galcon 8118 AC-GQ8 controller, showing its grey casing, control panel with LCD display, and a protective cover.

Opsætning og installation

This section provides instructions for the proper setup and installation of your Galcon 8118 AC-GQ8 controller.

Montering af controlleren

• Select a suitable indoor location away from direct sunlight, extreme temperatures, and moisture.
• Ensure the location allows for easy access to a standard electrical outlet and irrigation valve wiring.
• Use appropriate screws to securely mount the controller to a wall.

Ledningsforbindelser

• Strømtilslutning: Connect the controller to a standard AC power outlet.
• Valve Wiring: Connect each irrigation valve's common wire to the controller's common terminal (C). Connect each individual valve's hot wire to its corresponding station terminal (1-8).
• Master Valve/Pump Start Relay (Optional): If using a master valve or pump start relay, connect its common wire to the common terminal and its hot wire to the designated master valve terminal (M).
• Sensor Input (Optional): The controller supports various sensors (rain, temperature, wind, soil). Connect sensor wires to the dedicated sensor terminals as per the sensor's instructions.
• Lav voltage Lighting (Optional): For lav voltage lighting applications, a separate relay is required (not included). Connect the relay to the designated low voltage output terminal (X) and common.

Sørg for, at alle forbindelser er sikre og isolerede for at forhindre kortslutninger.

Betjeningsvejledning

This section details how to program and operate your Galcon 8118 AC-GQ8 controller for irrigation and low voltage belysning.

Indstilling af aktuelt klokkeslæt og dato

• Rotate the dial to the "SET CLOCK" position.
• Use the arrow buttons to adjust the time and date.
• Press "ENTER" or rotate the dial to save settings.

Programming Irrigation Programs (A, B, C)

The controller offers three independent irrigation programs (A, B, C) with flexible scheduling options.

1. Vælg program: Rotate the dial to "PROGRAM A", "PROGRAM B", or "PROGRAM C".
2. Indstil starttider: Each program can have up to 4 start times. Rotate the dial to "START TIME" and use arrow buttons to set.
3. Set Station Run Times: Rotate the dial to "RUN TIME". Select each station (1-8) and set its irrigation duration from 1 minute to 4 hours.
4. Indstil vandingsdage: Rotate the dial to "WATERING DAYS". Choose from:
   • Daglig: Select specific days of the week.
   • Ulige: Waters on odd-numbered days.
   • Endog: Waters on even-numbered days.
   • Cyklisk: Waters every 1 to 31 days. Set the cycle length.

Sæsonjustering

Adjust all program run times simultaneously from 10% to 190% of their set duration.

• Rotate the dial to "SEASONAL ADJUST".
• Use arrow buttons to set the desired percentage.

Regnforsinkelsesfunktion

Temporarily suspend irrigation for up to 240 days.

• Rotate the dial to "RAIN DELAY".
• Use arrow buttons to set the number of delay days.

Lav voltage Lighting Program (X)

This program operates independently of irrigation schedules.

• Rotate the dial to "PROGRAM X".
• Set the desired ON/OFF times for the low voltage belysning.

Manual Operation / System Test

To manually run a station or test the system:

• Rotate the dial to "MANUAL".
• Select the desired station and set its run time.
• The controller will activate the selected station immediately.

Opretholdelse

Korrekt vedligeholdelse sikrer din controllers levetid og optimale ydeevne.

• Rensning: Tør controllerens yderside af med en blød, tør klud.amp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Strømforsyning: Ensure the power supply is stable. In areas prone to power surges, consider using a surge protector.
• Batteri-sikkerhedskopi: The controller may use a 9V battery for program retention during power outages. Check and replace the battery annually or as needed.
• Ledningsinspektion: Periodically inspect all wiring connections for corrosion or damage.

Fejlfinding

This section addresses common issues you might encounter with your Galcon 8118 AC-GQ8 controller.

If issues persist after following these steps, contact Galcon customer support.

Specifikationer

• Modelnummer: GAEDS2U0258
• Antal stationer: 8 (7 irrigation + 1 low voltage lighting, or 8 irrigation)
• Programmer: 3 (A, B, C) for irrigation, 1 (X) for low voltage belysning
• Starttider pr. program: Op til 4
• Vandingsvarighed: 1 minut til 4 timer
• Cyclic Watering: Hver 1. til 31. dag
• Sæsonjustering: 10 % til 190 %
• Forsinket regn: Op til 240 dage
• Sensor Input: Compatible with rain, temperature, wind, soil sensors
• Strømkilde: AC (details not specified, assuming standard household current)
• Batteri: 1 x 9V battery required (for program retention)
• Produktdimensioner: 6.1 x 19.81 x 25.65 cm
• Varens vægt: 680.39 g (1.5 pund)
• Skærmtype: LCD eller LED
• Farve: Grå
• Fabrikant: Galcon

Garanti og support

For information regarding product warranty, technical support, or service, please refer to the official Galcon webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Galcon Contact Information: Besøg venligst www.galcon.co.il for de mest opdaterede supportressourcer og kontaktoplysninger.