Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump User Manual

1. Introduktion

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump. This high-capacity pump is engineered to boost water pressure from city water sources or draw water from lakes and streams for various sprinkling and irrigation applications. It features a robust 1-1/2 HP dual voltage motor and a corrosion-resistant thermoplastic construction, ensuring durability and reliable performance. The pump is self-priming after its initial fill with water, simplifying setup.

Image 1.1: The Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump, showcasing its compact design and durable thermoplastic housing.

2. Sikkerhedsoplysninger

Read and understand all safety warnings and instructions before installing or operating this pump. Failure to follow these instructions can result in electric shock, fire, serious injury, or death.

• Elektrisk sikkerhed: Always disconnect power before servicing the pump. Ensure the pump is properly grounded. All electrical wiring should be performed by a qualified electrician and comply with local codes. Do not operate the pump with a damaged cord or plug.
• Vandsikkerhed: Never run the pump dry, as this can cause severe damage. Protect the pump and plumbing from freezing temperatures to prevent cracking and leaks.
• Generel sikkerhed: Wear safety glasses when working with the pump. Keep children and unauthorized persons away from the operating area. Do not use this pump for flammable or corrosive liquids.

3. Pakkens indhold

Ved udpakning skal du kontrollere, at alle komponenter er til stede og ubeskadigede. Pakken skal indeholde:

• Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump (1 unit)
• Brugervejledning (dette dokument)

4. Opsætning

Korrekt installation er afgørende for pumpens ydeevne og levetid.

4.1 Placering

• Installer pumpen på en fast, plan overflade for at minimere vibrationer.
• Choose a location that is protected from direct sunlight, rain, and freezing temperatures.
• Ensure adequate ventilation around the motor for cooling.

4.2 Rørforbindelser

• Use appropriate pipe sizes for the inlet and outlet to ensure optimal flow and prevent cavitation.
• Apply thread sealant to all pipe connections to prevent air leaks, especially on the suction side.
• Install a foot valve with a strainer on the end of the suction line if drawing water from a lake or stream to prevent debris from entering the pump and to maintain prime.
• Install a check valve on the discharge side if necessary to prevent backflow.

4.3 Elektrisk tilslutning

• The pump features a dual voltage motor (115V or 230V). Ensure the motor is wired for the correct voltage supply available. Refer to the motor's wiring diagram for specific instructions.
• Connect the pump to a dedicated, properly fused electrical circuit.
• Sørg for, at pumpen er korrekt jordforbundet for at forhindre fare for elektrisk stød.

4.4 Spædning af pumpen

Før første ibrugtagning skal pumpen primes:

1. Remove the priming plug located on top of the pump casing.
2. Fyld pumpen casinhelt med vand, indtil det løber over.
3. Sæt spædeproppen sikkert på igen.
4. Ensure all valves on the suction and discharge lines are open.

5. Betjeningsvejledning

Når pumpen er installeret og klargjort, er den klar til drift.

5.1 Start af pumpen

1. Verify that all connections are tight and there are no visible leaks.
2. Ensure the suction line is submerged in water (if drawing from a source) and the discharge line is open.
3. Turn on the electrical power to the pump. The pump should start and begin moving water.
4. Monitor the pump for the first few minutes of operation for any unusual noises or vibrations.

5.2 Stop af pumpen

To stop the pump, simply turn off the electrical power supply.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger pumpens levetid.

6.1 Regelmæssig kontrol

• Periodically inspect the pump and piping for any signs of leaks, corrosion, or damage.
• Clean any debris from the suction strainer (if applicable) to maintain proper flow.
• Ensure the motor's ventilation openings are clear of obstructions.

6.2 Vinterklargøring (til kolde klimaer)

If the pump will be exposed to freezing temperatures, it must be drained to prevent damage:

1. Afbryd strømmen til pumpen.
2. Remove the drain plug(s) from the pump casing and any low points in the piping system.
3. Lad alt vandet løbe helt ud.
4. Store the pump in a dry, protected area if possible, or ensure all plugs are reinstalled loosely to allow for air circulation.

7. Fejlfinding

Dette afsnit indeholder løsninger på almindelige problemer, du kan støde på.

8. Specifikationer

Technical details for the Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump.

• Fabrikant: Everbilt
• Modelnummer: EFLS15-HD
• Varenummer: EFLS15-HD
• Farve: Sort
• Stil: Over Jorden
• Materiale: Plast, polypropylen (PP)
• Strømkildetype: AC/DC
• Voltage: 115 Volts (AC) / 230 Volts (AC) (Dual Voltage)
• Hestekræfter: 1-1 / 2 HK
• Pumpekapacitet: Up to 4020 GPH (Gallons Per Hour)
• Maximum Lifting Height (Suction Depth): Op til 20 fod
• Varepakkemængde: 1
• Varens vægt: 19.5 kg
• Produktdimensioner: 76.2 x 40.64 x 40.64 cm (Længde x Bredde x Højde)
• UPC: 856594003961
• Dato først tilgængelig: 22. juni 2015

9. Garanti og support

For warranty information, technical support, or replacement parts, please contact Everbilt customer service. Keep your purchase receipt as proof of purchase for any warranty claims. Detailed contact information can typically be found on the product packaging or the official Everbilt webwebsted.