Indledning
This manual provides instructions for the safe and effective use of your ExpertPower 7.2V 1500mAh NiCd replacement battery. Please read this manual thoroughly before using the battery to ensure optimal performance and safety.
These batteries are designed as direct replacements for various Makita 7.2V power tools.
Sikkerhedsoplysninger
WARNING: Improper use of batteries can result in fire, explosion, or other hazards.
- Kortslut ikke batteripolerne.
- Udsæt ikke batteriet for vand eller fugt.
- Opbevar ikke batteriet i direkte sollys eller ved høje temperaturer.
- Do not incinerate or dispose of the battery in fire.
- Forsøg ikke at adskille eller modificere batteriet.
- Opbevar batterier utilgængeligt for børn.
- Use only chargers specifically designed for NiCd batteries.
- If the battery leaks, avoid contact with skin and eyes. Rinse immediately with water and seek medical attention.
Produktegenskaber
- Brand New: Ensures fresh performance.
- Ni-Cd Chemistry: Nickel-Cadmium battery type.
- 7.2 volt: Standard bindtage for compatible tools.
- 1500 mAh Kapacitet: Giver ample power til længerevarende brug.
- Built-in Circuit Protection: Prevents overheating, short circuits, and overcharging.
- Materialer af høj kvalitet: Constructed for durability and reliability.
Kompatibilitet
This ExpertPower battery is a replacement for Makita part numbers: 191679-9, 192532-2, 192695-4, 632002-4, 632003-2, 7000, 7002, 7033.
It is compatible with the following Makita power tool models:
- 3700D, 3700DW
- 4071D, 4073D
- 4307D, 4307DW
- 4770D
- 6002D, 6002DW, 6002DWK
- 6010D, 6010DL, 6010DW, 6010DWK
- 6012D, 6012DL, 6012DW, 6012DWK
- 6015DWE, 6015DWK
- 6016DW
- 6017DWBE, 6017DWE
- 6018D, 6018DWBE, 6018DWE
- 6019D, 6019DW, 6019DWBE, 6019DWE, 6019DWLE
- 6022DW
- 6071DW, 6071DWK
- 6072DL, 6072DW, 6072DWK
- 6073D, 6073DW
- 6075D, 6075DW
- 6172D, 6172DW
- 6710D, 6710DW
- 6912D, 6912DW
- 9035D, 9035DW
- 9200D
- 9500D, 9500DW
- DA3000D, DA3000DW
- DA301D, DA301DW
- DA302D, DA302DW, DA302DWB
- ML700 (Flashlight), ML701, ML702
- UH1070DW, UH3000D, UH3000DW, UH3070DW
- UM1000D, UM1200DW, UM1270DW
Opsætning og installation
- Indledende opkrævning: For optimal performance, fully charge the battery before its first use. Refer to the "Charging" section for details.
- Isætning af batteri:
- Align the battery with the battery slot on your compatible Makita power tool.
- Slide the battery into the tool until it clicks securely into place. Ensure it is fully seated and does not wobble.
- Fjernelse af batteriet:
- Locate the battery release button(s) on your power tool.
- Tryk på udløserknappen(e) og hold dem nede, mens du skubber batteriet ud af værktøjet.
Image: Two ExpertPower 7.2V NiCd batteries. These batteries are designed for compatibility with various Makita power tools.
Opladning
Use only a charger specifically designed for 7.2V NiCd batteries. Using an incompatible charger can damage the battery or cause safety hazards.
- Connect your NiCd battery charger to a power outlet.
- Insert the ExpertPower battery into the charger, ensuring proper alignment.
- Observe the charger's indicator lights. A typical NiCd charger will show a red light during charging and a green light when fully charged. Refer to your charger's manual for specific indicator meanings.
- Allow the battery to charge completely. Overcharging NiCd batteries can reduce their lifespan, though built-in protection helps mitigate this.
- Når batteriet er opladet, skal det tages ud af opladeren.
Note: NiCd batteries can develop a "memory effect" if repeatedly recharged after only being partially discharged. To minimize this, it is recommended to fully discharge NiCd batteries before recharging them periodically.
Drift
Once the battery is fully charged and securely installed in your compatible Makita power tool, the tool is ready for operation according to its own user manual. Always follow the safety guidelines provided with your power tool.
- Ensure the battery is clean and free of debris before insertion.
- Tving ikke batteriet ind i værktøjet eller opladeren.
- Monitor battery performance during use. If the tool's power significantly decreases, it's time to recharge the battery.
Opretholdelse
- Rensning: Keep battery terminals clean and free of dirt or corrosion. Use a dry cloth to wipe them if necessary.
- Opbevaring: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is advisable to store NiCd batteries in a discharged state.
- Cyklusliv: NiCd batteries have a finite number of charge/discharge cycles. Proper charging and storage can help maximize their lifespan.
- Undgå dyb udflåd: While NiCd batteries benefit from occasional full discharge to combat memory effect, consistently running them completely dead can stress the battery.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Batteriet oplades ikke |
|
|
| Kort løbetid |
|
|
| Battery gets hot during charging/use |
|
|
Specifikationer
- Batteritype: NiCd (Nickel-Cadmium)
- Voltage: 7.2 volt
- Kapacitet: 1500 mAh (milli)amphere time)
- Modelnummer: I0IBTPMK7K15C
- Produktdimensioner: 1.94 x 1.11 x 5.3 tommer
- Varens vægt: 1.4 pounds (Total weight for 2 batteries)
- Fabrikant: ExpertPower
Bortskaffelse af batteri
NiCd batteries contain cadmium, a toxic heavy metal. Do not dispose of these batteries in household waste. Always dispose of NiCd batteries responsibly at designated recycling centers or according to local regulations. Many retailers that sell rechargeable batteries also offer recycling programs.
Proper disposal helps protect the environment and prevents potential health hazards.
Garanti og support
For warranty information or technical support regarding your ExpertPower battery, please contact ExpertPower customer service directly. Refer to the packaging or the ExpertPower webwebstedet for aktuelle kontaktoplysninger.
ExpertPower products are tested to match and/or exceed specifications of OEM products and are made with high-quality materials.