Sartorius Cubis Balance MSA2202S100D0 User Manual

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your Sartorius Cubis Balance MSA2202S100D0. The Cubis Balance is a precision toploading instrument designed for accurate mass determination in laboratory and industrial settings. It features a high-resolution color TFT touchscreen, integrated software, and advanced functions such as automatic internal calibration (isoCAL) and motorized leveling.

2. Sikkerhedsoplysninger

Observe the following safety precautions to ensure safe operation and to prevent damage to the balance or injury to personnel:

• Brug kun vægten i et stabilt, plant miljø fri for vibrationer og træk.
• Sørg for, at strømforsyningen voltage matches the requirements specified for the balance.
• Udsæt ikke vægten for ekstreme temperaturer, fugtighed eller direkte sollys.
• Avoid spilling liquids on the balance. If spills occur, disconnect power and clean immediately.
• Kun kvalificeret personale bør udføre vedligeholdelse eller reparationer.

3. Pakkens indhold

Kontroller, at alle genstande er til stede og ubeskadigede ved udpakning:

• Sartorius Cubis Balance MSA2202S100D0
• Universal power supply with 120V line cord
• Instruktionsmanual (dette dokument)
• Standard factory certificate of conformity to specifications

4. Opsætning

4.1 Udpakning og placering

Carefully remove the balance from its packaging. Place the balance on a stable, level, and vibration-free surface. Ensure adequate space around the balance for operation and ventilation. Avoid locations near air conditioning vents, open windows, or heavy machinery that could cause air currents or vibrations.

Figure 1: Sartorius Cubis Balance MSA2202S100D0. This image shows the balance from an angled front view, highlighting the stainless steel weighing pan, the white housing, and the integrated color TFT touchscreen display showing "0.00" g.

4.2 Strømtilslutning

Connect the universal power supply to the balance and then plug the 120V line cord into a suitable electrical outlet. The balance will perform an initial self-test upon power-up.

4.3 Nivellering

The Cubis Balance features automatic motorized leveling. Upon initial setup or relocation, the balance will prompt for leveling or can be initiated via the touchscreen interface. Follow the on-screen instructions to ensure the balance is perfectly level for accurate measurements.

4.4 Initial Calibration (isoCAL)

The balance is equipped with isoCAL, a fully automatic internal temperature- and time-controlled calibration function. It is recommended to perform an initial isoCAL cycle after setup and before first use to ensure optimal accuracy. This can be initiated through the balance's menu system.

5. Betjeningsvejledning

5.1 Berøringsskærmsgrænseflade

The balance features a 5.7" high-resolution color TFT touchscreen. This interface provides interactive guidance for managing weighing tasks, user settings, and system settings. Basic functions can also be accessed via the physical keypad buttons surrounding the screen.

5.2 Grundlæggende vejning

1. Ensure the weighing pan is clean and empty.
2. Tryk på Tara button (if applicable) or use the touchscreen to zero the balance.
3. Placer forsigtigt sample på midten af ​​vejepladen.
4. Aflæs den stabile vægt, der vises på skærmen.
5. Fjern sample.

5.3 Avancerede applikationer

The Cubis Balance includes 18 built-in applications customizable for complex lab weighing tasks. Access these applications through the touchscreen menu. Examples inkluderer:

• Enhedskonvertering: Change between various weighing units (g, kg, ct, lb, oz, ozt, grain, dwt, mg, parts per pound, Austrian carat, Newton, lb:oz, microgram).
• SQmin Function: For minimum initial weight according to USP standards.
• Densitetsbestemmelse: Calculate the density of samples.
• Formulering: For multi-component weighing processes.
• Tæller: Determine the number of pieces based on a reference weight.
• Kontrolvejning: Verify if a sample's weight falls within a defined tolerance range.
• Statistik: Perform statistical analysis on a series of weighings.

5.4 Kalibrering

Regelmæssig kalibrering er afgørende for at opretholde nøjagtigheden.

• isoCAL (Internal Calibration): The balance automatically performs internal calibration based on temperature and time changes. This function can also be manually initiated via the menu.
• Ekstern kalibrering: The balance supports calibration using external weights. Refer to the on-screen prompts or the detailed menu instructions for the procedure.

5.5 Datagrænseflader

The balance offers multiple interfaces for data management:

• USB-port: For connecting to a computer (Windows OS) for data transfer.
• RS-232C-port: For connecting peripheral devices.
• Ethernet-port: Til netværksintegration.
• SD-kortlæser: For importing and exporting data.

6. Vedligeholdelse

6.1 Rengøring

To clean the balance, disconnect it from the power supply. Use a soft, damp cloth with a mild detergent. Do not use abrasive cleaners or solvents. Ensure no liquids enter the balance housing. The weighing pan can be removed for separate cleaning.

6.2 Generel pleje

Protect the balance from dust and debris when not in use. Avoid placing heavy objects on the weighing pan when the balance is off. The balance is IP54 certified, providing protection against dust and water splashes from all directions.

7. Fejlfinding

If you encounter issues with your balance, consider the following common solutions:

• Upræcise læsninger: Check if the balance is level. Perform an isoCAL or external calibration. Ensure the environment is stable and free from drafts or vibrations.
• Skærm virker ikke: Verify the power connection. Ensure the power supply is functioning correctly.
• Balance Not Responding: Try restarting the balance by disconnecting and reconnecting the power.
• Fejlmeddelelser: Refer to the on-screen error codes or the detailed product documentation for specific error interpretations and solutions.

8. Specifikationer

9. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the official Sartorius website or contact your authorized Sartorius distributor. Keep your purchase receipt and product serial number readily available for support requests.