1. Produktet er slutview
The Laserliner DistanceMaster Compact is a precise laser distance meter designed for accurate length, area, and volume measurements. It features a color display and a robust, ergonomically designed rubber casing, making it suitable for various environments, including construction sites and indoor applications.
Nøglefunktioner:
- Precise point-accurate laser measurement for accurate length determination.
- Area and volume functions for calculating room sizes and material quantities.
- Measured value memory for up to 10 entries.
- Measuring accuracy of ±3 mm up to 25 meters.
- Internal measuring range from 0.1 meters to 25 meters.
- Two selectable reference points for measurement: front and rear.
- Min/Max function for determining diagonals, vertical, and horizontal distances.
- Illuminated three-line color LCD display for clear readability.
- Robust, ergonomically designed rubber casing with IP54 protection against dust and splashing water.
Image 1.1: The Laserliner DistanceMaster Compact laser rangefinder with its protective carrying case. The device features a clear digital display showing measurement readings and battery status.
2. Opsætning
2.1 Batteriinstallation
The DistanceMaster Compact requires two AAA batteries for operation. These are typically included with the device.
- Find batteridækslet på bagsiden af enheden.
- Skub eller afklips dækslet for at åbne rummet.
- Isæt to AAA-batterier, og sørg for at polerne (+/-) vender korrekt som angivet i batterirummet.
- Luk batterirummets dæksel forsvarligt.
2.2 Tænd/sluk
For at tænde enheden skal du trykke på DIST knap. For at slukke skal du trykke på og holde nede C/OFF knap.
3. Betjeningsvejledning
3.1 Grundlæggende afstandsmåling
For a single distance measurement:
- Ret laserstrålen mod måloverfladen.
- Tryk på DIST button once. The measured distance will appear on the display.
3.2 Areal- og volumenmåling
The device can calculate area and volume automatically after taking the necessary measurements.
- Tryk på knappen med square/cube icon to select area or volume mode.
- Follow the on-screen prompts to measure the required dimensions (length, width, height).
- Det beregnede areal eller volumen vil blive vist.
Image 3.1: The laser rangefinder being used to measure dimensions for calculating the area of a wall, illustrating its practical application for material estimation.
3.3 Min/Max Tracking
The Min/Max function allows for continuous measurement, displaying the minimum and maximum distances recorded during a sweep. This is useful for finding diagonals or precise horizontal/vertical distances.
- Tryk og hold på DIST MIN/MAX knap.
- Sweep the device across the desired area. The display will continuously update with the minimum and maximum measured values.
- Trykke DIST MIN/MAX again to stop tracking.
Billede 3.2: En detaljeret view of the control panel, highlighting the 'DIST MIN/MAX' button used for continuous measurement and tracking.
3.4 Valg af referencepunkt
The measurement reference point can be switched between the front and rear of the device. This is important for accurate measurements depending on where the device is placed.
- Tryk på knappen med pil ikon to toggle between front and rear reference points. The active reference point will be indicated on the display.
Image 3.3: The laser rangefinder in use, demonstrating a distance measurement across a room, emphasizing the importance of selecting the correct reference point.
3.5 Hukommelsesfunktion
The device can store up to 10 measured values. To access or clear the memory, refer to the on-screen menu or specific button combinations detailed in the full manual (not provided here).
4. Vedligeholdelse
4.1 Rengøring
- Tør enheden af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Hold laserlinsen ren og fri for støv eller snavs for at sikre nøjagtige målinger.
4.2 Opbevaring
- Opbevar enheden i dens beskyttende etui, når den ikke er i brug.
- Fjern batterierne, hvis enheden ikke skal bruges i længere tid, for at forhindre lækage.
- Opbevares på et tørt sted, væk fra ekstreme temperaturer.
5. Fejlfinding
- Enheden tænder ikke: Kontroller batteripolariteten, og sørg for, at batterierne ikke er afladede. Udskift dem om nødvendigt.
- Upræcise målinger: Ensure the laser lens is clean. Verify the correct reference point is selected. Avoid measuring through transparent surfaces or highly reflective materials.
- Problemer med skærm: Hvis displayet er svagt eller flimrer, skal batterierne udskiftes.
6. Specifikationer
Image 6.1: The vibrant color LCD display of the DistanceMaster Compact, designed for clear visibility of measurements and functions.
| Feature | Specifikation |
|---|---|
| Modelnummer | 080.936A |
| Måleområde | 0.1 m til 25 m (0.3 ft til 82 ft) |
| Nøjagtighed | ±3 mm |
| Måleenheder | Meter (m), Fod (ft), Tommer (in) |
| Laser klasse | 2 |
| Bølgelængde | 650 nm |
| Memory Records | 10 |
| Vise | Illuminated 3-line color LCD |
| Strømforsyning | 2 x AAA alkaliske batterier (inkluderet) |
| Driftstemperatur | -10 °C til 40 °C (14 °F til 104 °F) |
| Beskyttelsesvurdering | IP54 (støv- og stænkvandsbeskyttet) |
| Materiale | Rubber casing |
| Farve | Sort, hvid |
| Produktdimensioner | 110 mm (H) x 43 mm (B) x 27 mm (D) |
| Produktets vægt | 100 gram |
Image 6.2: The robust design of the laser rangefinder, featuring anti-shock rubber for durability and protection in demanding environments, indicated by the IP54 rating.
7. Garanti og support
For warranty information, technical support, or service inquiries regarding your Laserliner DistanceMaster Compact, please refer to the official Laserliner webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
For yderligere hjælp kan du besøge Laserliner official webwebsted.