YILONG YL Thermal Tattoo Stencil Printer Machine User Manual

1. Introduktion

This manual provides detailed instructions for the safe and efficient operation of your YILONG YL Thermal Tattoo Stencil Printer Machine. Please read this manual thoroughly before using the device to ensure proper function and longevity.

2. Sikkerhedsoplysninger

• Ensure the power supply matches the device's requirements (AC 110V-220V; 50Hz/0.46A).
• Do not operate the machine continuously for extended periods. Allow it to cool down after transferring 1-2 sheets to prevent overheating and protect the printer mechanism.
• Unplug the machine when not in use to prevent potential overheating and conserve energy.
• Hold enheden væk fra vand eller andre væsker.
• Do not attempt to disassemble or repair the machine yourself. Contact qualified service personnel for assistance.
• Opbevares utilgængeligt for børn.

3. Produktet er slutview

Familiarize yourself with the components and controls of your thermal stencil printer.

Figur 3.1: YILONG YL Thermal Tattoo Stencil Printer Machine with key components labeled.

• Transfer Paper Input: Slot for inserting transfer paper.
• Betjeningspanel: Contains control buttons and indicator lights.
• Strømindikatorlys: Indikerer strømstatus.
• Skifte: Tænd/sluk -kontakt.
• Advarselslampe: Indicates errors or warnings.
• Start of Work (COPY button): Initiates the transfer process.
• Document Output: Where the original document exits.
• Document Feeder: Slot for inserting the original document.
• Transfer Paper Output: Where the stenciled transfer paper exits.
• MIRROR/NORMAL: Mode selection for mirror or normal copy.
• DEEPNESS 1/DEEPNESS 2: Depth level adjustments for transfer quality.
• STOP: Stopper den nuværende operation.

4. Opsætning

1. Pak maskinen ud: Carefully remove the thermal stencil printer from its packaging.
2. Placer maskinen: Position the machine on a stable, flat surface with adequate ventilation.
3. Tilslut strøm: Plug the power cord into the machine and then into a suitable electrical outlet.
4. Tænd: Flip the power switch to the "ON" position. The Power Indicator Light should illuminate.

5. Betjening

Follow these steps to create a tattoo stencil using your YILONG YL Thermal Tattoo Stencil Printer Machine.

5.1 Loading Paper and Document

1. Åbn låget: Open the cover of the transfer machine by pulling up on both sides.
   

   Figur 5.1: Opening the cover of the thermal transfer machine.

2. Load Transfer Paper: Load the transfer paper from the back of the machine into the Transfer Paper Input slot. Ensure the paper is inserted straight and smoothly.
   

   Figur 5.2: Loading transfer paper into the machine.
3. Place Original Pattern: Place your original pattern (document) onto the Document Feeder slot at the front of the machine. Ensure the pattern faces down and is aligned correctly.
   

   Figur 5.3: Placing the original pattern for transfer.

5.2 Setting Copy Modes and Depth

• Mirror/Normal Mode: Select "MIRROR" for standard tattoo stencils (most common) or "NORMAL" if your design does not need to be mirrored.
• Deepness Settings: Adjust the "DEEPNESS" setting (1 or 2) based on the desired darkness and detail of the stencil. Experiment to find the best setting for your specific design and transfer paper.

5.3 Starting the Transfer

1. Press COPY: Once the paper and document are loaded and settings are selected, press the "COPY" button to start the transfer process.
2. Overvåg fremskridt: The machine will feed the document and transfer paper through, creating the stencil.
3. Retrieve Stencil: Once the process is complete, retrieve the stenciled transfer paper from the Transfer Paper Output.
   

   Figur 5.4: Examples of high-quality transferred stencils.

4. Hvileperiode: To ensure optimal transfer effect and protect the machine, allow it to rest for a few minutes after transferring 1-2 sheets. Avoid continuous operation for prolonged periods.

5.4 Videodemonstration

For a visual guide on setting up and operating the machine, please watch the official product video below.

6. Vedligeholdelse

• Rengøringsruller: Regularly clean the rubber guide rollers to prevent ink buildup, which can affect paper feeding and transfer quality. Use a soft, damp klæde.
• Fjernelse af støv: Keep the machine free from dust and debris. Use a soft brush or compressed air to clean vents and paper paths.
• Opbevaring: When not in use, store the machine in a dry, cool place, away from direct sunlight and extreme temperatures.

7. Fejlfinding

8. Specifikationer

Figur 8.1: Technical specifications of the YILONG YL Thermal Tattoo Stencil Printer Machine.

• Punkt: Thermal Stencil Transfer Copier / Tattoo Transfer Machine
• Scanningstilstand: CIS
• Effective Scanning Width: 210 mm
• Dokumenttype: Fine/Photo
• Dokumentstørrelse: A5-A4
• Dokumenttykkelse: 0.06 mm - 0.15 mm
• Optagetilstand: TPH
• Effektiv udskrivningsbredde: 210 mm
• Magt: AC 110V-220V; 50Hz/0.46A
• Strømforbrug: Standby 5W
• Arbejdstemperatur: 5°C - 35°C
• Relativ luftfugtighed: 20% - 80%
• Vægt: 1.17 kg
• Dimensioner (B x D x H): 290 mm x 180 mm x 80 mm
• Forbindelse teknologi: USB
• Udskrivningsteknologi: Termisk
• Speciel funktion: Portable, Decal Printing
• Farve: Sort
• Printer output: Monokrom
• Controller type: Knap kontrol
• Maksimal mediestørrelse: 8.5 x 11 tommer

9. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official YILONG webwebstedet. Behold din købskvittering som købsbevis.