Indledning
Tak for købetasing the Edifier Hecate G2000 Active RGB Gaming Speakers. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new speakers. Please read this manual thoroughly before use to ensure proper functionality and to maximize your listening experience. Keep this manual for future reference.
Sikkerhedsoplysninger
To ensure safe and optimal performance, please observe the following safety guidelines:
- Udsæt ikke højttalerne for regn, fugt eller ekstreme temperaturer.
- Undgå at placere højttalerne i nærheden af varmekilder eller i direkte sollys.
- Do not open the speaker cabinet. Refer all servicing to qualified personnel.
- Brug kun den strømadapter, der følger med produktet.
- Sørg for ordentlig ventilation omkring højttalerne.
- Opbevares utilgængeligt for børn.
Pakkens indhold
Pak forsigtigt kassen ud, og sørg for, at alle nedenstående varer er til stede og i god stand:
- 2 x Edifier Hecate G2000 Speakers
- 1 x strømadapter
- 1 x 3.5 mm lydkabel
- 1 x USB-kabel

Image: Contents of the Edifier G2000 speaker package, including two white speakers, a power adapter, a 3.5mm audio cable, and a USB cable.
Produkt overview
Højttalerlayout og betjeningselementer
Familiarize yourself with the various parts and controls of your G2000 speakers.

Billede: Vinklet view of two white G2000 speakers, showing the front and side with blue RGB lighting, and the rear panel of one speaker with controls and ports.
Bagpanelets kontroller og porte

Image: Close-up of the rear panel of a white G2000 speaker, clearly showing the USB, AUX, and power input ports, along with control buttons.
- Lydstyrkeknap: Rotate to adjust volume. Press to cycle through input modes (Bluetooth, USB, AUX).
- RGB-lysknap: Press to cycle through 12 different RGB lighting effects. Press and hold to turn RGB lights off/on.
- Lydtilstandsknap: Press to cycle through Gaming, Movie, and Music sound modes.
- USB-indgang: Connect to a computer for digital audio playback.
- AUX-indgang: Connect to devices using a 3.5mm audio cable.
- Strømindgang: Tilslut den medfølgende strømadapter.
Opsætning
Højttalerplacering
Place the speakers on a stable, flat surface, ideally equidistant from your listening position for optimal stereo imaging. Ensure there is adequate space behind the speakers for cable connections and ventilation.

Image: Two white G2000 speakers positioned on a desk next to a computer monitor, with a person using a keyboard.
Strømtilslutning
- Connect the power adapter to the Power Input port on the back of the main speaker.
- Plug the power adapter into a wall outlet. The speakers will power on automatically, indicated by an initial sound and RGB lighting.
Tilslutning til lydkilder
Bluetooth-forbindelse
- Press the Volume Knob to cycle through input modes until the Bluetooth indicator light flashes. This indicates the speakers are in pairing mode.
- On your audio device (smartphone, tablet, computer), enable Bluetooth and search for "EDIFIER G2000".
- Select "EDIFIER G2000" to pair. Once connected, the Bluetooth indicator light will be solid.
USB-forbindelse
- Connect one end of the supplied USB cable to the USB Input port on the back of the main speaker.
- Tilslut den anden ende af USB-kablet til en USB-port på din computer.
- Press the Volume Knob to cycle through input modes until the USB indicator light is solid. Your computer should recognize the speakers as an audio output device.
AUX tilslutning
- Connect one end of the supplied 3.5mm audio cable to the AUX Input port on the back of the main speaker.
- Connect the other end of the 3.5mm audio cable to the audio output jack of your device (e.g., TV, game console, MP3 player).
- Press the Volume Knob to cycle through input modes until the AUX indicator light is solid.

Image: Close-up of the speaker's rear panel with cables connected, illustrating Bluetooth, USB, and 3.5mm AUX connectivity options.
Betjeningsvejledning
Tænd/sluk
The speakers power on automatically when connected to power. To turn off, disconnect the power adapter. Note: Some users have reported an audible startup sound that cannot be disabled.
Lydstyrkekontrol
Rotate the Volume Knob clockwise to increase volume and counter-clockwise to decrease volume.
Ændring af inputtilstande
Press the Volume Knob briefly to cycle through the available input modes: Bluetooth, USB, and AUX. The corresponding indicator light will illuminate.
Lydtilstande
The G2000 speakers offer three optimized sound modes:
- Spiltilstand: Enhanced soundstage and positional audio for gaming.
- Filmtilstand: Optimized for dialogue clarity and cinematic effects.
- Musiktilstand: Balanced audio reproduction for general music listening.
Press the Sound Mode Button to switch between these modes. The indicator light will change to reflect the selected mode.

Image: A hand adjusting a knob on a speaker, with glowing RGB lights, illustrating the sound modes and RGB effects.
RGB lysstyring
The speakers feature 12 different RGB lighting effects to enhance your gaming environment.
- Press the RGB Light Button briefly to cycle through the 12 available lighting effects.
- Press and hold the RGB Light Button for approximately 2 seconds to turn the RGB lights off or on.
Opretholdelse
Korrekt vedligeholdelse sikrer dine højttaleres levetid og ydeevne.
- Rensning: Brug en blød, tør klud til at rengøre højttaleroverfladerne. Brug ikke slibende rengøringsmidler, voks eller opløsningsmidler.
- Opbevaring: Hvis højttalerne opbevares i en længere periode, skal de afbrydes fra strømmen og opbevares et køligt og tørt sted.
- Undgå væsker: Do not spill liquids on the speakers. If liquid enters the speaker, immediately disconnect power and contact customer support.
Fejlfinding
If you encounter any issues with your G2000 speakers, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd | Power not connected; incorrect input mode; volume too low; audio cable loose/faulty. | Ensure power is connected. Cycle through input modes. Increase volume. Check audio cable connections. |
| Bluetooth-forbindelse mislykkes | Højttalere er ikke i parringstilstand; enhed for langt væk; interferens. | Sørg for, at højttalerne er i Bluetooth-parringstilstand (blinkende indikator). Flyt enheden tættere på. Genstart højttalerne og enheden. |
| RGB-lys virker ikke | Lights turned off; faulty unit. | Press and hold the RGB Light Button to turn lights on. If issue persists, contact support. |
| Forvrænget lyd | Volume too high; faulty audio source/cable. | Reduce volume on speakers and source device. Try a different audio source or cable. |
| Annoying startup sound | Dette er en designfunktion. | This sound cannot be disabled. Consider leaving speakers powered on if this is a significant concern. |
Specifikationer
Detailed technical specifications for the Edifier Hecate G2000 speakers:
- Mærke: Edifier
- Modelnavn: G2000
- Maksimal højttalerudgangseffekt: 32 watt
- Frekvensrespons: 98 Hz
- Forbindelse teknologi: Hjælpestik, USB, Bluetooth
- Lydudgangstilstand: Stereoanlæg
- Monteringstype: Bordmontering
- Materiale: Hvid plast
- Højttalertype: Indendørs
- Speciel funktion: Bluetooth, RGB Lighting
- Farve: Hvid
- Kontrolmetode: Tryk knap
- Højttalerstørrelse: 7 Centimeters (Woofer), 1 Inch (Tweeter)
- Bluetooth Range: 10 meter
- Kompatible enheder: Bærbar computer, smartphone, tablet, fjernsyn
- Strømkilde: El-kabel
- Emnedimensioner (D x B x H): 10.5 x 10.6 x 13 centimeter
- Varens vægt: 1.9 kilo

Image: Diagram showing the dimensions of a single Edifier G2000 speaker in centimeters.
Garanti og support
Garantioplysninger
The Edifier Hecate G2000 speakers come with a 2 års producentgarantiDenne garanti dækker materiale- og fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.
Kundesupport
For technical assistance, warranty claims, or any questions regarding your Edifier Hecate G2000 speakers, please contact Edifier customer support through their official webwebstedet eller den forhandler, hvor du købte produktet.
Please note: Contact information may vary by region. Refer to your product packaging or Edifier's official webwebstedet for de mest opdaterede supportoplysninger.