1. Introduktion
Thank you for choosing the Fluid Audio C5 2-Way 5 Inch Active Studio Monitor. This manual provides essential information for the proper setup, operation, and maintenance of your studio monitors. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
2. Sikkerhedsinstruktioner
- Strømkilde: Connect the unit only to a power supply of the type specified in this manual or on the unit. Ensure the voltage matcher din region (110V eller 220V).
- Ventilation: Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
- Vand og fugt: Brug ikke dette apparat i nærheden af vand, og udsæt det ikke for dryp eller stænk.
- Varme: Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Rensning: Rengør kun med en tør klud.
- Service: Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
3. Pakkens indhold
The Fluid Audio C5 2-Way 5 Inch Active Studio Monitor package includes:
- Fluid Audio C5 Studio Monitor Speaker (Pair)
- Aftagelig strømledning
- Bare speaker wire
- 3.5mm headphone to RCA cable
- Acoustic Isolation Pads
4. Produktet er slutview
4.1 Frontpanel overview
The front panel features the 5-inch woofer and 1-inch tweeter, designed for accurate sound reproduction. The woofer is responsible for low-frequency sounds, while the tweeter handles high frequencies.

Figur 1: Forside view of the Fluid Audio C5 Studio Monitor.
4.2 Bagpanel overview
The rear panel houses all the input connections, power switch, volume control, and acoustic tuning options. These controls allow you to adapt the monitor's sound to your specific listening environment.

Figur 2: Bagside view of the Fluid Audio C5 Studio Monitor.
5. Opsætning
5.1 Placering
Position your C5 monitors on a stable surface, ideally at ear level, forming an equilateral triangle with your listening position. Ensure there is adequate space around the monitors for proper ventilation.
5.2 Forbindelser
The C5 monitors offer various input options:
- Balancerede indgange: Use the 1/4-inch TRS or XLR inputs for professional audio interfaces and mixers. These connections minimize noise interference.
- Ubalancerede indgange: Use the RCA input for consumer-grade audio equipment.
Connect the power cord to the AC input on the rear panel and then to a suitable power outlet.
5.3 Acoustic Tuning
The rear panel features controls to adjust the monitor's frequency response to your room acoustics:
- Bind: Justerer det samlede outputniveau.
- Mid: Justerer mellemfrekvenserne.
- Høj: Adjusts the high-range frequencies.
- Low Cutoff: Filters out low frequencies, useful when paired with a subwoofer.
- Akustisk rum: Compensates for bass buildup when monitors are placed near walls or corners.
6. Betjeningsvejledning
- Sørg for, at alle lydforbindelser er sikre, før du tænder for enheden.
- Turn the volume knob on the rear panel to its minimum setting.
- Flip the power switch to the 'On' position.
- Øg gradvist lydstyrken til det ønskede lytteniveau.
- When finished, turn the volume down before powering off the monitors.
7. Vedligeholdelse
- Rensning: Use a soft, dry cloth to clean the exterior of the monitors. Avoid abrasive cleaners or solvents.
- Støv: Regularly dust the drivers and vents to prevent accumulation.
- Miljø: Keep the monitors in a dry environment, away from extreme temperatures and direct sunlight.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd | Power off, incorrect input, volume too low. | Check power connection, select correct input, increase volume. |
| Forvrænget lyd | Indgangssignal for højt, defekt kabel. | Reduce input level, try a different cable. |
| Hum eller Buzz | Ground loop, unshielded cables. | Use balanced cables, check grounding, try different power outlets. |
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Højttaler type | 2-Way Active Studio Monitor |
| Bashøjttaler diameter | 5 tommer |
| Diskant-diameter | 1 tommer |
| Amplivligere magt | 2 x 20 Watts (40W total) |
| Frekvensrespons | 54 Hz - 22 kHz |
| Crossover-frekvens | 4.5 kHz |
| Signal-støjforhold | > 90 dB (A-vægtet) |
| Indgangsimpedans | 20 k ohms balanced, 10 k ohms unbalanced |
| Input bindtage | Fixed 110V ~50/60 Hz or 220V~50/60 Hz |
| Forbindelsesteknologi | RCA, TRS |
| Varens vægt | 10 pund |
10. Garanti og support
The Fluid Audio C5 Studio Monitor comes with a 2 års begrænset garanti. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Fluid Audio webwebsted.