Azden SMX-100 High Performance Mid-Side Stereo Shotgun Microphone User Manual

1. Introduktion

The Azden SMX-100 is a high-quality stereo shotgun microphone engineered for professional audio capture in broadcast, videography, and other demanding audio applications. Its compact and lightweight design, combined with a Mid-Side (M-S) pickup configuration, ensures wide frequency response and compatibility with both stereo and mono recording setups. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your SMX-100 microphone.

Nøglefunktioner:

• Mid-Side Stereo Pickup Pattern for flexible stereo imaging.
• Wide frequency response from 20 Hz to 18 kHz for accurate sound reproduction.
• High maximum SPL of 120 dB to handle loud sound sources without distortion.
• Requires external phantom power (11-52 VDC) for operation.
• Equipped with a 5-Pin XLR output for professional connectivity.
• Includes a shoe-mount mic clip and a high-density foam windshield for immediate use.

2. Opsætning

2.1 Udpakning og inspektion

Carefully remove all components from the custom carrying case. Verify that the package contains the SMX-100 microphone, a shoe-mount mic clip, and a foam windshield. Inspect all items for any signs of damage.

Figure 1: Azden SMX-100 microphone and accessories in carrying case. The image shows the black shotgun microphone, a black foam windshield, and a black shoe-mount microphone clip, all nestled in custom-cut foam within a grey hard-shell case.

2.2 Montering af mikrofonen

1. Attach the provided shoe-mount mic clip to your camera's hot shoe or a compatible microphone stand.
2. Gently insert the SMX-100 microphone into the mic clip, ensuring it is securely held.

2.3 Tilslutning af mikrofonen

The SMX-100 features a hard-wired 5-pin XLR connector. This microphone requires external phantom power ranging from 11 to 52 VDC for operation.

1. Connect the 5-pin XLR connector from the SMX-100 to a compatible audio input on your camera, mixer, or audio recorder. Ensure the input provides the necessary phantom power.
2. Verify that the phantom power is enabled on your recording device's input channel.

Figure 2: 5-Pin XLR connector. This image highlights the five metal pins within the connector, essential for proper stereo signal transmission and phantom power.

2.4 Installing the Windshield

Slide the foam windshield over the microphone's head. The windshield helps to reduce wind noise and plosives, improving audio clarity, especially in outdoor environments.

3. Betjeningsvejledning

3.1 Tænd

The SMX-100 does not have an internal power switch. It is powered by external phantom power supplied through the 5-pin XLR connection. Ensure your recording device's phantom power is activated for the connected input channel.

3.2 Mid-Side (M-S) Stereo Recording

The SMX-100 utilizes a Mid-Side stereo configuration. This setup captures a central (Mid) signal and a bidirectional (Side) signal. These two signals are then decoded to produce a stereo image.

• The Mid capsule captures sound directly in front of the microphone (cardioid pattern).
• The Side capsule captures sound from the left and right (figure-8 pattern).
• M-S decoding can be performed in your audio recorder or editing software to adjust the stereo width after recording.
• This configuration allows for excellent mono compatibility, as the Mid signal can be used independently.

3.3 Optimal placering

Position the microphone with the front end pointing towards your primary sound source. For optimal stereo imaging, consider the distance from the source and the desired ambient sound capture. Experiment with placement to achieve the best results for your specific recording environment.

4. Vedligeholdelse

4.1 Rengøring

• Always disconnect the microphone from power before cleaning.
• Tør mikrofonhuset af med en blød, tør klud.
• Brug ikke flydende rengøringsmidler, opløsningsmidler eller slibende materialer, da disse kan beskadige mikrofonens overflade eller interne komponenter.
• The foam windshield can be gently hand-washed with mild soap and water, then air-dried completely before re-use.

4.2 Opbevaring

When not in use, store the SMX-100 in its custom carrying case to protect it from dust, moisture, and physical damage. Avoid storing the microphone in extreme temperatures or high humidity.

5. Fejlfinding

6. Specifikationer

7. Garanti og support

For information regarding warranty coverage, technical support, or service, please contact Azden customer service or visit the official Azden webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Manufacturer: AVBcable.com

Bemærk: Specifikationerne kan ændres uden varsel.