Wohler 8440 HBF 420 fugtmåler brugermanual

1. Introduktion

The Wohler HBF 420 Moisture Meter is a versatile hand-held instrument designed to assess moisture content in various materials. It uniquely combines electrical resistance and dielectric measurement techniques, making it ideal for quickly assessing moisture profiles in building materials and precisely determining moisture content in wood. This manual provides comprehensive instructions for the safe and effective use of your device.

2. Sikkerhedsoplysninger

Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in injury or damage to the meter.

• Udsæt ikke enheden for ekstreme temperaturer, fugt eller direkte sollys.
• Hold enheden væk fra stærke magnetiske felter.
• Forsøg ikke at åbne eller reparere enheden selv. Overlad al service til kvalificeret personale.
• Ensure the measurement pins are clean and free from debris before use.
• Handle the measurement pins with care to avoid injury.
• Bortskaf batterier i henhold til lokale regler.

3. Produktet er slutview

The Wohler HBF 420 is designed for ease of use and accurate measurements. Key features include:

• Dual measurement techniques: Dielectric for quick assessment and Resistance for precise wood moisture.
• Automatic temperature compensation for accurate readings.
• Klart digitalt display.

Figur 3.1: Wohler HBF 420 Moisture Meter. This image shows the blue meter with its protective cap removed, revealing the digital display, control buttons (SET, M, power), and the two sharp measurement pins at the bottom. The display shows "16".

Figur 3.2: Using the Wohler HBF 420 Moisture Meter. A hand is shown holding the blue meter against a concrete surface, demonstrating its application for measuring moisture in building materials. The display shows "8.9".

4. Opsætning

4.1 Batteriinstallation

The Wohler HBF 420 requires 4 AAA batteries for operation.

1. Find batteridækslet på bagsiden af ​​enheden.
2. Skub eller afklips dækslet for at åbne rummet.
3. Isæt 4 AAA-batterier, og sørg for at polerne (+/-) vender korrekt som angivet inde i batterirummet.
4. Sæt batterirummets dæksel på igen.

4.2 Indledende tænding

Tryk på tænd / sluk-knappen (⏻) to turn on the device. The display will illuminate and show a brief startup sequence.

5. Betjeningsvejledning

5.1 Valg af måletilstand

The HBF 420 supports two primary measurement techniques:

• Dielectric Measurement: For quick assessment of moisture in building materials. This mode uses the sensor on the back of the device.
• Modstandsmåling: For precise determination of moisture content in wood using the integrated pins.

Brug M button to toggle between measurement modes. The display will indicate the active mode.

5.2 Tage en måling

1. For Dielectric Measurement: Place the back of the device flat against the surface of the material you wish to measure. Ensure full contact. The reading will appear on the display.
2. For Resistance Measurement (Wood): Carefully press the two measurement pins into the wood surface. Ensure both pins penetrate the material. The moisture content will be displayed.
3. Read the value on the digital display.

5.3 Temperaturkompensation

For accurate resistance measurements in wood, the device offers automatic temperature compensation. Enter the material temperature using the SÆT button and navigation controls (if available, based on typical Wohler interfaces, assuming the SET button is for settings/calibration). Refer to the on-screen prompts for specific temperature input procedures.

5.4 Alarmfunktion

The device features an alarm function (indicated by "ALARM" on the device). Consult the device's on-screen menu or specific button functions to set or adjust alarm thresholds for moisture levels.

6. Vedligeholdelse

6.1 Rengøring

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the measurement pins are clean and free of residue after each use.

6.2 Opbevaring

When not in use, store the Wohler HBF 420 in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please contact Wohler customer service directly. Refer to the product packaging or the official Wohler webwebsted for kontaktoplysninger.

Wohler Webwebsted: www.wohler.com