Defiant 270 Degree Black Replacement Outdoor Motion Sensor Instruction Manual

1. Produktet er slutview

The Defiant DF-5716-BK is a 270-degree black replacement outdoor motion sensor designed to enhance security and convenience for outdoor lighting systems. This sensor detects motion within its specified range and activates connected lights, providing illumination when needed. It is suitable for various outdoor applications, including gardens, terraces, and walkways, and is compatible with Heath Zenith Par Lights.

Image 1: Defiant DF-5716-BK 270 Degree Black Replacement Outdoor Motion Sensor. This image displays the compact, black-colored motion sensor unit with its distinctive curved detection lens and adjustable mounting base.

2. Sikkerhedsoplysninger

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til afbryderen eller sikringsboksen før installation eller service.
• Sørg for, at alle elektriske tilslutninger er udført i overensstemmelse med lokale forskrifter og bestemmelser.
• This product is designed for outdoor use and is waterproof. However, ensure proper sealing during installation to maintain its integrity.
• Do not attempt to modify or repair the sensor. Refer all servicing to qualified personnel.
• Hold emballagemateriale væk fra børn.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Defiant 270 Degree Replacement Motion Sensor (Model DF-5716-BK)
• Mounting hardware (typically screws and wire nuts)
• Instruktionsmanual (dette dokument)

4. Specifikationer

5. Installation

This section provides general guidelines for replacing an existing motion sensor. Specific wiring diagrams may vary; always consult the original fixture's instructions or a qualified electrician if unsure.

1. Sluk for strømmen: Locate the circuit breaker or fuse that supplies power to the outdoor light fixture and turn it OFF. Verify power is off using a voltage tester.
2. Fjern den gamle sensor: Carefully disconnect the wiring from the old motion sensor. Note the wire connections (typically Line, Load, and Neutral/Ground).
3. Forbered ny sensor: Thread the wires from the new Defiant motion sensor through the mounting plate or fixture opening.
4. Ledningsforbindelser:
   • Tilslut sort ledning from the sensor to the black (hot) wire fra strømforsyningen.
   • Tilslut rød ledning from the sensor to the black (load) wire af lysarmaturet.
   • Tilslut hvid ledning from the sensor to the hvid (neutral) ledning from the power supply and the light fixture.
   • Tilslut jordledning (bare copper or green) from the sensor to the fixture's ground wire and the house ground wire.

   Fastgør alle forbindelser med ledningsmøtrikker og elektrisk tape.

5. Monteringssensor: Securely attach the new motion sensor to the fixture or mounting box using the provided hardware. Ensure it is oriented correctly for optimal detection.
6. Tætningsforbindelser: Apply weather-resistant sealant around the mounting base to prevent water intrusion, especially if exposed to direct weather.
7. Gendan strøm: Tænd for strømmen igen ved afbryderen.

6. Opsætning og justering

After installation, adjust the sensor's settings for optimal performance.

• Test mode: Most motion sensors have a test mode. Upon initial power-up, the sensor may enter a test mode where lights turn on for a short period (e.g., 5-10 seconds) with each detection, regardless of ambient light. This allows for quick aiming and sensitivity testing.
• Følsomhedsjustering: Use the sensitivity dial (if present) to adjust how easily the sensor detects motion.
  • Turn clockwise for higher sensitivity (detects smaller movements or at greater distances).
  • Turn counter-clockwise for lower sensitivity (reduces false triggers from small animals or distant objects).
• Tidsjustering: Use the time dial (if present) to set how long the light remains on after motion is no longer detected. Common settings range from a few seconds to several minutes.
• Light Level (Dusk-to-Dawn) Adjustment: Some sensors include a photocell adjustment to determine the ambient light level at which the sensor becomes active. This prevents the light from turning on during daylight hours.
• Aiming the Sensor: Physically adjust the sensor head to cover the desired detection area. Walk through the intended detection zone to verify coverage and make fine adjustments.

7. Betjeningsvejledning

Once installed and adjusted, the Defiant motion sensor operates automatically:

• During nighttime (or when ambient light is below the set threshold), the sensor will detect motion within its 270-degree, 100-foot range.
• Upon detection, the connected light fixture will illuminate for the duration set by the time adjustment dial.
• If motion continues to be detected, the light will remain on or reset its timer.
• After motion ceases and the set time expires, the light will turn off.
• During daylight hours (or when ambient light is above the set threshold), the sensor will typically remain inactive, conserving energy.

8. Vedligeholdelse

The Defiant motion sensor requires minimal maintenance to ensure continued performance.

• Rensning: Tør sensorlinsen af ​​med jævne mellemrum med en blød klud.amp cloth to remove dust, dirt, or debris that may obstruct its view. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Inspektion: Annually inspect the sensor and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
• Forhindringer: Keep the detection area clear of growing foliage, branches, or other objects that could block the sensor's view or cause false triggers.

9. Fejlfinding

If your motion sensor is not functioning as expected, try the following steps:

10. Garanti og support

This Defiant motion sensor comes with a 1 års begrænset garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For warranty claims, technical assistance, or further inquiries, please contact Defiant customer support. Keep your proof of purchase for warranty validation.

Contact information for Defiant customer support can typically be found on the product packaging or the official Defiant webwebsted.