1. Introduktion
This manual provides essential information for the safe and efficient operation of your ZENY Electric Ice Shaver Machine. Please read all instructions carefully before use and retain this manual for future reference.
Figure 1: ZENY Electric Ice Shaver Machine
2. Vigtige sikkerhedsinstruktioner
- Læs alle instruktioner, inden du betjener apparatet.
- Betjen ikke noget apparat med en beskadiget ledning eller stik, eller efter at apparatet ikke fungerer korrekt eller er blevet beskadiget på nogen måde.
- To protect against electrical shock, do not immerse the appliance, cord, or plug in water or other liquids.
- Tæt opsyn er nødvendigt, når et apparat bruges af eller i nærheden af børn.
- Træk stikket ud af stikkontakten, når det ikke er i brug, før du sætter dele på eller af, og før rengøring.
- Undgå kontakt med bevægelige dele.
- Brug kun tilbehør anbefalet eller solgt af producenten.
- Må ikke bruges udendørs.
- Lad ikke ledningen hænge ud over kanten af bordet eller bordpladen eller røre ved varme overflader.
- Always ensure the hopper handle is securely closed before operating the machine. The machine features a safety switch that prevents operation if the handle is open.
3. Produktet er slutview
The ZENY Electric Ice Shaver Machine is designed for efficient ice shaving, producing up to 143 lbs (65 kg) of shaved ice per hour. It features a durable stainless steel construction and a heavy cast base for stability.
Figure 2: Key Components of the Ice Shaver Machine. Includes the handle, safety cover, ice barrel, stainless steel bowl, power switch, and cast base.
4. Opsætning
4.1 Udpakning og første rengøring
- Fjern forsigtigt alle komponenter fra emballagen.
- Inspect the machine for any damage. If damage is found, do not use and contact customer support.
- Before first use, clean the ice barrel, shaving blade, and stainless steel bowl with warm, soapy water. Rinse thoroughly and dry completely.
4.2 Placering
- Place the ice shaver on a stable, flat, and dry surface.
- Sørg for, at der er tilstrækkelig plads omkring maskinen til ventilation og betjening.
- Hold maskinen væk fra varmekilder og direkte sollys.
Figure 3: Proper placement of the ice shaver on a countertop.
5. Betjeningsvejledning
5.1 Preparing for Shaving
- Sørg for, at tænd/sluk-knappen er i 'OFF'-positionen.
- Lift the hopper handle to open the ice barrel.
- Place the stainless steel collection bowl under the ice chute.
- Add ice cubes into the ice barrel. Do not overfill.
Figure 4: Ice cubes placed inside the ice barrel, ready for shaving.
5.2 Shaving Ice
- Close the hopper handle firmly. The machine will not operate if the handle is not fully closed due to the built-in safety switch.
- Plug the machine into a standard 110V electrical outlet.
- Flip the power switch to the 'ON' position. The motor will start, and the shaving blade will begin to rotate.
- Gently press down on the hopper handle to apply pressure to the ice cubes against the shaving blade. Shaved ice will dispense into the collection bowl.
- Continue pressing until all ice is shaved or the desired amount is collected.
- Once finished, release the hopper handle and turn the power switch to 'OFF'.
- Træk stikket til maskinen ud af stikkontakten.
6. Vedligeholdelse
6.1 Rengøring
- Tag altid stikket ud af maskinen før rengøring.
- Tør maskinens ydre af med adamp klæde. Brug ikke slibende rengøringsmidler.
- Remove the stainless steel collection bowl and wash it with warm, soapy water. Rinse and dry thoroughly.
- Carefully clean the ice barrel and shaving blade. The blade is sharp; exercise caution.
- Sørg for, at alle dele er helt tørre, før de monteres igen eller opbevares.
6.2 Opbevaring
- Opbevar maskinen et køligt, tørt sted, væk fra direkte sollys og fugt.
- Keep the machine covered to protect it from dust.
Figur 5: Underside view highlighting rubber anti-slip rings for stability and multiple outlets for heat dissipation, important for maintenance and longevity.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Maskinen tænder ikke. | Not plugged in; Power switch off; Hopper handle not fully closed. | Ensure plug is securely in outlet; Turn power switch to 'ON'; Close hopper handle firmly until it clicks. |
| Isen barberer ikke eller barberer dårligt. | Insufficient pressure on handle; Blade is dull or damaged; Ice is too soft/melted. | Apply more consistent pressure on the handle; Inspect blade for damage (contact support if damaged); Use firmer, colder ice cubes. |
| Overdreven støj eller vibrationer. | Machine not on a stable surface; Loose parts; Overloaded with ice. | Place on a flat, stable surface; Check for any loose components (do not attempt to repair internal parts); Reduce the amount of ice in the hopper. |
8. Specifikationer
- Mærke: ZENY
- Model: B00OUPHB12
- Produktdimensioner: 17" D x 12" B x 7.99" H
- Kapacitet: 143 lbs/t (65 kg/t)
- Wattage: 300W
- Voltage: 110V
- Frekvens: 60 Hz
- Materiale Type: 18/10 Stål
- UPC: 702458227397
9. Garanti og support
For warranty information or technical support, please refer to the product packaging or contact ZENY customer service directly. Keep your purchase receipt as proof of purchase.