Amazon Basics Dual Monitor Stand (K001395) Instruction Manual

Indledning

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Amazon Basics Dual Monitor Stand. This dual-arm monitor stand is designed to free up desktop space and offer ergonomic positioning for two LCD monitors, each weighing up to 20 pounds.

Amazon Basics Dual Monitor Stand with two monitors attached, showing adjustable settings and desk clamp kompatibilitet.

Image: The Amazon Basics Dual Monitor Stand, illustrating its dual-arm design, adjustable features, and desk clamp mekanisme.

Sikkerhedsoplysninger

Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in property damage or personal injury.

Ensure your desk surface is sturdy enough to support the weight of the monitor stand and two monitors.
Do not exceed the maximum weight capacity of 20 pounds (9.07 kg) per arm.
Always use the provided hardware. If any parts are missing or damaged, contact customer support.
Hold børn og kæledyr væk under montering.
Spænd alle skruer godt fast, men overspænd dem ikke.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før monteringen påbegyndes:

Dual-arm monitor stand components
Skrivebord clamp forsamling
Grommet mount components
Monteringsudstyr (skruer, skiver)
Hex keys for adjustments
Kabelbindere

Opsætning og installation

The monitor stand can be installed using either a desk clamp or a grommet mount.

1. Skrivebord Clamp Installation

Fastgør skrivebordet clamp base to the edge of your desk. Ensure the desk thickness is between 0.4 and 2.4 inches (1 cm - 6 cm).
Spænd clamp sikkert for at forhindre bevægelse.

2. Montering af rørbeslag (valgfrit)

If your desk has a grommet hole, you can use this method for a more permanent installation.

Disassemble the desk clamp and reconfigure it for grommet mounting as per the detailed instructions in the included manual.
Insert the grommet bolt through the desk hole and secure it from underneath with the provided plate and wing nut.

3. Tilslutning af skærme

This stand is VESA compatible (100 x 100mm and 75 x 75mm).

Attach the VESA plates to the back of each monitor using the appropriate screws.
Slide the monitors (with attached VESA plates) onto the arms of the stand. Ensure they click securely into place.

4. Kabelforvaltning

Route monitor cables through the integrated cable management channels on the arms and secure them with the provided cable ties. Do not overtighten the ties to avoid damaging cables.

Open video

Video: This video demonstrates the installation and usage of the AmazonBasics Dual Side-by-Side Monitor Arm, including how to attach monitors and manage cables.

Betjening og justeringer

The monitor stand offers various adjustments for optimal viewkomfort.

Two monitors mounted on the Amazon Basics Dual Monitor Stand, showing the range of motion for adjustable positioning.

Image: The dual monitor stand demonstrating its adjustable positioning capabilities, allowing monitors to be moved left, right, up, and down.

1. Højdejustering

Gently lift or lower the monitor arms to your desired height. The gas spring mechanism allows for smooth vertical movement.

2. Hældningsjustering

Monitors can be tilted 70 degrees backward and 5 degrees forward for an ergonomic reading angle. Loosen the tilt screw, adjust the angle, and then re-tighten.

3. Rotation

Each monitor can be independently rotated 360 degrees, allowing for easy transitions between landscape and portrait modes.

4. Tension Adjustments

If the monitor arms are too stiff or too loose and do not hold their position, you may need to adjust the tension. Use the provided hex key to turn the tension screw. Turn clockwise to increase tension (for heavier monitors) or counter-clockwise to decrease tension (for lighter monitors).

Video: This video illustrates how to adjust the tension of the monitor arm to ensure it holds the monitor's weight correctly.

Video: This video demonstrates the installation process for a premium single monitor stand, including tension adjustments, which are similar for dual arms.

Opretholdelse

Regelmæssig vedligeholdelse sikrer din skærmstanders levetid og optimale ydeevne.

Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er stramme.
Rengør stativet med en blød, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
Smør ikke gasfjedermekanismen.

Fejlfinding

Monitor Arm Does Not Stay Up or Sags

This is typically due to insufficient tension in the gas spring mechanism for the weight of your monitor. Refer to the "Tension Adjustments" section above. Use the provided hex key to increase the tension by turning the screw clockwise until the arm can hold the monitor in the desired position.