Indledning
Tak for købetasing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp er designet til at give ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
Sikkerhedsoplysninger
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- Brug kun pærer af den angivne type og watttage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- Denne lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Sørg for at lamp er placeret på en stabil, plan overflade for at forhindre væltning.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
Pakkens indhold
Kontroller venligst, at alle komponenter er til stede, før monteringen påbegyndes:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp stikkontakter)
- Hardware Pack (screws, washers, etc., if applicable)
- Strømledning
Opsætning og montering
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- Udpak komponenter: Tag forsigtigt alle dele ud af emballagen, og læg dem på en ren, blød overflade for at forhindre ridser.
- Saml stænger: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- Fastgør base: Securely attach the assembled poles to the brushed steel lamp grundlag.
- Installer hylder: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- Vedhæft Lamp Stikkontakter: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp stikkontakt.
- Indsæt pærer: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp Spænd ikke for hårdt.
- Position Lamp: Placer lamp in its desired location, ensuring the power cord is not pinched or obstructed.
Figur 2: Detalje af lamp's base and shades.
Betjeningsvejledning
- Strømtilslutning: Tilslut lamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- Tænd/sluk: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
Opretholdelse
- Rensning: For at rense lamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- Udskiftning af pære: Tag altid stikket ud af lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lamp tændes ikke. | 1. Lamp ikke tilsluttet. 2. Pæren er løs eller brændt ud. 3. Stikkontakten fungerer ikke. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| Lyse flimrer. | 1. Løs pære. 2. Forkert pæretype/watttage. 3. Defekt pære. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp er ustabil. | 1. Ikke på en plan overflade. 2. Poles not fully tightened. | 1. Flyt lamp til en flad, stabil overflade. 2. Re-tighten all pole connections. |
Specifikationer
- Modelnummer: 4305-22
- Dimensioner (D x B x H): 11.7" D x 14" B x 68" H
- Varens vægt: 15.2 pund
- Materiale Type: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- Skygge farve: Hvid
- Antal lyskilder: 3
- Pære base: E26 medium
- Wattage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- Switch Type: Pull Chain (3 individual switches)
- Strømkilde: Elektrisk med ledning
- Ledningslængde: Cirka 5 fod (60 tommer)
- Installationstype: Frit stående
- Indendørs/udendørs brug: Kun indendørs
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
Garantioplysninger
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
Kundesupport
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso webwebsted for supportressourcer.
Adesso Official Webwebsted: www.adessohome.com