Tchibo B00LXY3NEW
TCM Tchibo Digital Radio Clock with Motion Sensor, LCD, and Crescendo Alarm
Model: B00LXY3NEW
Indledning
Thank you for choosing the Tchibo Digital Radio Clock. This device combines a precise digital clock with a radio function and a convenient motion sensor for display illumination. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your product.
Sikkerhedsinstruktioner
- Læs alle instruktioner omhyggeligt før brug, og gem dem til senere brug.
- Udsæt ikke enheden for vand, høj luftfugtighed eller ekstreme temperaturer.
- Brug kun den angivne batteritype. Sørg for korrekt polaritet, når du isætter batterierne.
- Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt kvalificeret servicepersonale.
- Opbevares utilgængeligt for børn.
- Bortskaf batterier ansvarligt i henhold til lokale regler.
Pakkens indhold
Kontroller venligst, at alle varer er til stede i din pakke:
- Tchibo Digital Radio Clock (1 unit)
- Instruktionsmanual (dette dokument)
- Bemærk: Batterier er ikke inkluderet og skal købes separat.
Produkt overview
Familiarize yourself with the main components of your radio clock:

Billede 1: Front view of the Tchibo Digital Radio Clock. The image displays the rectangular anthracite-colored clock with a clear LCD screen in the center. Below the screen, several control buttons are visible, likely for setting time, alarm, and radio functions. The overall design is modern and compact, suitable for a bedside table.
- LCD-skærm: Viser tid, alarmstatus og radiofrekvens.
- Bevægelsessensor: Activates display backlight when motion is detected nearby.
- Kontrolknapper: (e.g., SET, ALARM, MODE, TUNING, SNOOZE) - Specific button functions will be detailed in the "Operating" section.
- Batterirum: Located on the back or bottom of the unit.
Opsætning
1. Powering On (Battery Installation)
- Find batteridækslet på bagsiden eller undersiden af uret.
- Åbn låget.
- Insert the required batteries (e.g., 2x AA or AAA, refer to the compartment label) ensuring correct polarity (+/-).
- Luk batterirummets dæksel forsvarligt.
- The display should now light up, and the clock will attempt to synchronize the time automatically.
2. Indledende tidssynkronisering
Your radio clock is designed to automatically synchronize with a radio time signal. This process may take a few minutes, especially during the first setup or after battery replacement. Ensure the clock is placed near a window or in an area with good reception.
- During synchronization, an icon (e.g., an antenna symbol) may flash on the display.
- Når synkroniseringen er fuld, vil ikonet lyse konstant, og det korrekte klokkeslæt vises.
3. Manual Time Setting (If Automatic Fails)
If the clock fails to synchronize automatically or if you wish to set the time manually:
- Tryk og hold på SÆT -knappen i cirka 3 sekunder, indtil timecifrene begynder at blinke.
- Brug UP or NED buttons (or similar, depending on model) to adjust the hour.
- Trykke SÆT igen for at bekræfte timen og gå videre til minutindstillingen.
- Juster minutterne ved hjælp af UP or NED knapper.
- Trykke SÆT to confirm and exit the time setting mode.
4. Indstilling af alarmen
Your clock features a Crescendo alarm, which gradually increases in volume.
- Tryk og hold på ALARM button for approximately 3 seconds until the alarm hour digits flash.
- Brug UP or NED knapperne for at indstille den ønskede alarmtime.
- Trykke ALARM igen for at bekræfte timen og gå videre til minutindstillingen.
- Adjust the alarm minutes using the UP or NED knapper.
- Trykke ALARM for at bekræfte og afslutte alarmindstillingstilstand.
- For at aktivere/deaktivere alarmen skal du kort trykke på ALARM knappen. Et alarmikon vil vises/forsvinde på displayet.
5. Radioindstilling
(Note: While the product is a "radio clock", specific radio tuning details are not provided. This section assumes basic functionality.)
- Tryk på RADIO or MODE knappen for at skifte til radiotilstand.
- Brug TUNING or OP/NED knapperne til manuelt at stille ind på den ønskede station.
- Some models may have an auto-scan function; press and hold the TUNING knappen for at aktivere den.
Drift
1. Skærmfunktioner
- LCD-skærm: The main display shows the current time, and when active, the alarm time or radio frequency.
- Motion Sensor Backlight: The display is designed to be dim in normal conditions to avoid disturbing sleep. To illuminate the display, wave your hand over the top of the clock or activate the motion sensor area. The backlight will activate for a few seconds.
2. Alarmfunktioner
- Crescendo alarm: When the alarm sounds, its volume will gradually increase over a short period to gently wake you up.
- Snooze-funktion: Når alarmen lyder, skal du trykke på SLUM button (usually a large button on top). The alarm will pause for a set period (e.g., 5-10 minutes) and then sound again.
- Stop af alarmen: For at slukke for dagens alarm skal du trykke på en hvilken som helst anden knap (f.eks. ALARM, SÆT) while it is sounding. The alarm will reset for the next day if it is still activated.
3. Radiofunktioner
- Switching to Radio: Tryk på RADIO or MODE knappen for at lytte til radioen.
- Lydstyrkekontrol: Brug dedikeret LYDSTYRKE +/- knapperne eller OP/NED buttons in radio mode to adjust the sound level.
- Switching Off Radio: Tryk på SLUKKET or MODE button again to return to clock display or turn off the radio.
Opretholdelse
1. Rensning
- Wipe the clock with a soft, dry, or slightly damp klæde.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and electronic components.
- Sørg for, at der ikke kommer væske ind i enheden.
2. Udskiftning af batteri
- When the display becomes dim or functions become erratic, it's time to replace the batteries.
- Follow the "Powering On (Battery Installation)" steps in the Setup section to replace old batteries with new ones.
- Bortskaf brugte batterier i henhold til lokale miljøbestemmelser.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skærmen er tom eller svag. | Low or dead batteries; motion sensor not activated. | Replace batteries. Wave hand over the motion sensor area to activate backlight. |
| Tidspunktet er forkert eller synkroniserer ikke. | Poor radio signal; interference; initial synchronization failed. | Move the clock to a location with better reception (e.g., near a window). Perform manual time setting. |
| Alarmen lyder ikke. | Alarmen er ikke aktiveret; alarmlydstyrken er for lav. | Ensure the alarm icon is visible on the display. Check alarm settings and volume. |
| Radiomodtagelsen er dårlig. | Svagt signal; interferens. | Adjust the clock's position. Extend any built-in antenna if available. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Tchibo |
| Model | B00LXY3NEW |
| Farve | Antracit |
| Display Type | Digital LCD |
| Stil | Moderne |
| Særlige funktioner | Alarm, Radio, Motion Sensor, Crescendo Alarm |
| Strømkilde | Batteridrevet |
| Form | Rektangulær |
| Rammemateriale | Acrylonitril Butadien Styren (ABS) |
| Batterier medfølger | Ingen |
| Monteringstype | Bordplade |
| Bevægelsestype | Kvarts |
Garanti og support
This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or contact your retailer for specific warranty terms and conditions.
For technical support or service inquiries, please contact the retailer where you purchased the product or visit the official Tchibo webhjemmeside for kundeserviceinformation.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.