iJDMTOY 75-035
iJDMTOY OEM-Fit 3W Full LED Nummerpladelys Sæt Brugermanual
Brand: iJDMTOY | Model: 75-035
Produkt overview
The iJDMTOY OEM-Fit 3W Full LED License Plate Light Kit is designed to provide a direct fit replacement for your vehicle's original license plate lights. This kit features super bright xenon white Osram powered LED diodes, offering enhanced illumination and a modern aesthetic. It includes a built-in CAN-bus error free decoder to prevent "bulb out" warning messages on your dashboard.
Nøglefunktioner:
- Direct fit replacement for OEM license plate light assemblies.
- Equipped with super bright xenon white Osram powered LED diodes.
- Integrated CAN-bus error free decoder for no dashboard warnings.
- Provides even illumination and significantly brighter light output compared to incandescent bulbs.
- Enhances vehicle style, improves backup visibility, and increases night safety.
Opsætning og installation
This section provides step-by-step instructions for installing your new iJDMTOY LED License Plate Light Kit. It is recommended to perform this installation in a well-lit area.
Nødvendige værktøjer:
- Phillips Head Screwdriver (Number 1 recommended)
- Optional: Electrical Tape (for securing connections)
Installationstrin:
- Locate OEM Housing: Identify the original license plate light housings on your vehicle's trunk liner or rear bumper. These are typically secured by screws.
- Fjern skruer: Using a Phillips head screwdriver, remove the four screws that secure the OEM license plate light assembly.
Figur 2: Bagside view of the vehicle, indicating the position of the license plate lights. - Remove Old Housing: Carefully pull the old license plate light housing out of its socket.
- Detach Bulb Socket: Twist the bulb socket counter-clockwise to remove it from the old housing.
- Fjern gammel pære: Gently pull the incandescent bulb out of the socket. These are typically friction-fit bulbs.
- Connect New LED Adapter: Take the new iJDMTOY LED license plate light assembly. The wiring harness from the new LED unit plugs directly into the existing bulb outlet where the old bulb was removed. Ensure a tight, snug fit.
- Secure Wiring (Optional but Recommended): Tuck any extra wiring behind the screw mounts. Secure the connection with black electrical tape to prevent loose connections or potential water corrosion.
- Install New LED Assembly: Insert the new LED license plate light assembly into the opening. Ensure it sits flush.
- Secure New Assembly: Re-insert and tighten the original four screws to secure the new LED assembly in place.
- Test funktionalitet: Turn on your vehicle's lights to ensure the new LED license plate lights are functioning correctly.
Installationsvideoguide:
For en visuel vejledning til installationsprocessen, se venligst den officielle video nedenfor:
Betjeningsvejledning
The iJDMTOY LED License Plate Light Kit operates automatically with your vehicle's lighting system. Once installed, the lights will illuminate when your vehicle's parking lights or headlights are activated, providing bright and clear illumination for your license plate.
No additional controls or settings are required for the operation of these lights.
Opretholdelse
The iJDMTOY LED License Plate Light Kit is designed for long-lasting performance with minimal maintenance. Follow these guidelines to ensure optimal operation:
- Rensning: Periodically clean the lens of the LED lights with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners that could scratch the lens.
- Inspektion: Occasionally inspect the lights for any signs of damage or loose connections. Ensure the assemblies are securely fastened.
- Ingen pæreudskiftning: As these are full LED assemblies, individual LED bulbs cannot be replaced. The entire unit is designed for a long lifespan.
Fejlfinding
If you encounter any issues with your iJDMTOY LED License Plate Light Kit, refer to the following table for common problems and their solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke. | Loose connection; incorrect polarity; blown fuse (unlikely for new install). |
|
| Lysene flimrer. | Unstable connection; voltage udsving. |
|
| "Bulb Out" warning on dashboard. | CAN-bus system not recognizing the LED (unlikely due to built-in decoder); faulty decoder. |
|
Specifikationer
| Specifikation | Detalje |
|---|---|
| Mærke | iJDMTOY |
| Modelnummer | 75-035 (Replace Factory Number Plate Frame Light) |
| Lys farve | Xenon hvid |
| Wattage | 3 watts per assembly |
| LED type | 18-SMD Osram powered LED diodes |
| Speciel funktion | LED Illuminated, CAN-bus Error Free |
| Type køretøjstjeneste | Car (Compatible with 2011-2014 Hyundai Sonata YF i45 i40) |
| Varens vægt | 2.9 ounce |
| Linse materiale | Plast |
Garanti og support
For warranty information or technical support regarding your iJDMTOY LED License Plate Light Kit, please contact the manufacturer directly through their official website or the retailer from whom the product was purchased. Ensure you have your product model number (75-035) and purchase details available when contacting support.
Manufacturer: iJDMTOY Auto Accessories
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.