Indledning
This manual provides detailed instructions for the safe and proper installation and operation of your Mounting Dream MD2393-MX Full Motion TV Wall Mount. This mount is designed for most 26-55 inch LED, LCD, OLED, and Plasma flat screen TVs weighing up to 60 lbs, with VESA patterns ranging from 100x100mm to 400x400mm. Please read all instructions carefully before beginning installation.
Vigtige sikkerhedsoplysninger
WARNING: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty.
- Do not install on drywall alone. This mount is designed for single wood stud or concrete/brick walls.
- Sørg for, at dit tv's vægt ikke overstiger 27.2 kg.
- Verify your TV's VESA pattern is within 100x100mm to 400x400mm.
- Brug altid en stolpesøger til at finde træstolper præcist.
- For concrete or brick walls, concrete anchors are required and can be requested if not included.
- Check for potential cable blockage by the mount before final installation.
- Hvis du er i tvivl om installationen, bør du kontakte en kvalificeret fagmand.
Pakkens indhold
Please check that all parts are included and undamaged. If any parts are missing or defective, contact customer service.
- Fuld bevægelsesfri TV-vægbeslag
- TV Brackets (for attaching to TV back)
- Wall Plate (main wall-mounted component)
- Assorted TV Screws and Spacers
- Lag Bolts for Wall Mounting
- Boble niveau
- Cable Ties (3 included)
- Instruktionsmanual
- Concrete Anchors (available upon request for concrete/brick installation)
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | MD2393-MX |
| Kompatible tv-størrelser | 26-55 tommer |
| Maksimal tv-vægt | 60 lbs (27.2 kg) |
| VESA-kompatibilitet | 100x100mm til 400x400mm |
| Monteringstype | Vægmontering |
| Bevægelsestype | Swivel, Tilt, Full Motion, Articulating |
| Tilt vinkel | Up 5°, Down 15° |
| Drejevinkel | Op til ±90° (afhængigt af TV-størrelse) |
| Forlængelse fra væg | 2.9 tommer (tilbagetrukket) til 19 tommer (udstrakt) |
| Justering af nivellering | ±5° post-installation |
| Kompatible vægtyper | Single Wood Stud, Concrete/Brick Wall (Do not install on drywall only) |
| Materiale | Metal |
| Farve | Sort |
Opsætning og installation
Follow these steps for a secure installation. Ensure you have all necessary tools (e.g., drill, stud finder, level, screwdriver, wrench).
Step 1: Prepare the TV and Mount
- Disassemble the Wall Plate: The mount unit may come assembled. Carefully disassemble the wall plate from the TV plate using the provided tools.
- Fastgør beslag til tv'et: Secure the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure all screws are tightened securely.
Figur 1: Overview af den 3-trins installationsproces.
Trin 2: Forbered væggen
- Identificer vægtype: This mount is suitable for single wood stud or concrete/brick walls. DO NOT install on drywall only.
- Locate Studs (for Wood Stud Installation): Use a stud finder to accurately locate the center of the wood stud where you intend to mount the TV. Mark the drilling locations.
- Mark monteringshuller: Use the wall plate as a template to mark the precise drilling locations on the wall. Use the included bubble level to ensure the marks are perfectly horizontal.
- Bor pilothuller: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the lag bolts provided. For wood studs, ensure the pilot hole is slightly smaller than the lag bolt. For concrete/brick, use a masonry drill bit and insert concrete anchors (if applicable).
Figure 2: Pre-installation checks for TV compatibility and wall type.
Figur 3: Kompatible vægtyper til installation.
Figure 4: Available VESA patterns and their measurements.
Step 3: Install Wall Plate and Hang TV
- Attach Wall Plate to Wall: Align the wall plate with the drilled pilot holes. Secure it to the wall using the lag bolts. Tighten them firmly but do not overtighten.
- Hæng TV'et på vægpladen: Carefully lift your TV (with brackets attached) and hook it onto the wall plate. Ensure it is seated correctly and securely.
- Fastgør TV til vægplade: Tighten the two security screws located on the TV brackets to prevent accidental dislodgement.
Video 1: Mounting Dream TV Wall Mount Installation MD2393-MX. This video demonstrates the step-by-step process of installing the TV wall mount, including preparing the TV, marking the wall, and securing the mount and TV.
Video 2: Full Motion TV Wall Mount MD2393-MX Installation Guide. A comprehensive guide to installing the full motion TV wall mount, covering all essential steps for a secure setup.
Betjening af TV-beslaget
The MD2393-MX mount offers versatile adjustments for optimal viewkomfort.
Adjusting the TV Position
- Extend and Retract: Gently pull the TV forward to extend it up to 19 inches from the wall, or push it back to retract it to a slim 2.9 inches.
- Drejelig: The articulating arm allows you to swivel the TV left or right up to ±90°, depending on your TV size, to achieve the best viewing angle from any seat.
- Vip: Adjust the TV's vertical angle by tilting it up 5° or down 15° to reduce glare and improve viewkomfort.
- Leveling Adjustment: After installation, you can make a ±5° post-installation leveling adjustment to ensure your TV is perfectly horizontal.
Figure 5: Extend and Retract functionality of the mount.
Figure 6: Swivel capability for best viewvinkel.
Figure 7: Tilt function to reduce glare.
Figure 8: Easy post-installation leveling adjustment.
Opretholdelse
Regelmæssig vedligeholdelse sikrer dit TV-beslags levetid og sikkerhed.
- Periodisk eftersyn: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre.
- Rensning: Tør holderen af med en blød, tør klud for at fjerne støv. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
- Smøring: If the articulating arm movement becomes stiff over time, a small amount of silicone-based lubricant can be applied to the pivot points.
Fejlfinding
Hvis du støder på problemer, kan du bruge følgende almindelige løsninger:
- TV'et er ikke i vater: Use the post-installation leveling adjustment feature (±5°) to correct the tilt. Ensure the wall plate was installed level initially.
- Beslaget føles løst: Re-check all wall and TV attachment screws. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are firmly seated in the stud. If on concrete/brick, ensure anchors are properly installed.
- Vanskeligheder med at bevæge armen: Check for any obstructions. If the joints are stiff, apply a small amount of silicone lubricant.
- Cables are blocked: Before final installation, ensure the mount does not block any TV input ports. If already installed, carefully reroute cables or consider using angled adapters.
If problems persist, contact Mounting Dream customer support.
Garanti og support
Mounting Dream products are backed by a 10 års garanti, hvilket afspejler vores engagement i kvalitet og holdbarhed.
For any pre-purchase questions, installation assistance, or technical support, our US-based customer service team is ready to help. Please refer to the contact information provided with your product packaging or visit the official Mounting Dream webwebsted for support.
