Hager EK570 Battery-Powered Thermostat User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Hager EK570 battery-powered weekly thermostat. Please read this guide thoroughly before use to ensure proper function, safety, and to maximize the benefits of its programmable features. Keep this manual for future reference.

2. Sikkerhedsoplysninger

• Always disconnect power to the heating system before attempting any installation or maintenance.
• Installationen bør kun udføres af en kvalificeret elektriker eller en kompetent person.
• Do not expose the thermostat to extreme temperatures, direct sunlight, high humidity, or water.
• Use only LR6 (AA) batteries as specified. Do not mix old and new batteries or different types of batteries.
• Hold enheden væk fra børn.
• Do not attempt to open or repair the thermostat yourself. Refer to qualified service personnel.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• Hager EK570 Thermostat Unit
• 2 x LR6 (AA) Batteries
• Mounting Screws and Wall Plugs (if applicable)
• Denne brugervejledning

4. Produktet er slutview

Familiarize yourself with the components of your Hager EK570 thermostat:

Figur 1: Forside view of the Hager EK570 thermostat. The device features a clear LCD display at the top, two square buttons below the display, and a central control cluster at the bottom with '-', 'OK', and '+' buttons.

• LCD-skærm: Shows current temperature, time, day, operating mode, and program status.
• Kontrolknapper: Used for navigating menus, adjusting settings, and selecting modes. Typically includes 'Mode', 'Set', 'Up', 'Down', and 'OK' buttons.
• Batterirum: Placeret bag på enheden.

5. Opsætning

5.1. Batteriinstallation

1. Fjern bagdækslet på termostaten.
2. Insert the 2 x LR6 (AA) batteries, ensuring correct polarity (+/-).
3. Replace the back cover. The display should now activate.

5.2. Montering af termostaten

The Hager EK570 is designed for surface mounting.

1. Vælg en passende placering på en indvendig væg, væk fra direkte sollys, træk og varmekilder (f.eks. radiatorer, ovne).amps). The recommended height is approximately 1.5 meters from the floor.
2. Carefully detach the front part of the thermostat from its base plate.
3. Mark the drilling points on the wall using the base plate as a template.
4. Bor huller og indsæt vægpropper.
5. Secure the base plate to the wall using the provided screws.
6. Connect the heating system wires to the terminals on the base plate according to the wiring diagram provided with your heating system. Ensure all connections are secure and correct.
7. Reattach the front part of the thermostat to the base plate, ensuring it clicks securely into place.

5.3. Initial Settings (Time and Date)

Upon first power-up or after battery replacement, you may need to set the current time and day.

1. Press the 'SET' or 'MODE' button to enter the settings menu.
2. Use the '+' or '-' buttons to navigate to 'Time' or 'Date' settings.
3. Press 'OK' to confirm and then use '+' or '-' to adjust the values (hour, minute, day, month, year).
4. Press 'OK' to save each setting and exit the menu.

6. Betjeningsvejledning

The Hager EK570 offers various operating modes and programming options to optimize your heating.

6.1. Valg af driftstilstande

The thermostat supports the following modes:

• Komforttilstand: Maintains a comfortable temperature (e.g., 21°C) during occupied periods.
• Reduceret tilstand: Maintains a lower, energy-saving temperature (e.g., 18°C) during unoccupied periods or at night.
• Frostbeskyttelsestilstand: Opretholder en minimumstemperatur (f.eks. 5 °C) for at forhindre, at rør fryser.
• Manuel tilstand: Allows you to set a constant temperature that overrides any programmed schedule.
• Ferietilstand: Maintains a specific temperature for an extended period (e.g., during vacation).

To switch between modes, press the 'MODE' button repeatedly until the desired mode is displayed.

6.2. Justering af temperaturindstillingspunkt

In any operating mode (except Frost Protection), you can temporarily adjust the temperature setpoint:

1. Use the '+' or '-' buttons to increase or decrease the desired temperature.
2. The new setpoint will be active until the next programmed event or until you manually change it again. This is known as a temporary override.

6.3. Ugentlig programmering

The EK570 is a weekly programmable thermostat, allowing you to set up to 48 program steps per day across 4 setpoints (Comfort, Reduced, etc.). It comes with 3 pre-recorded programs and 1 free program for customization.

1. Press the 'PROG' or 'SET' button to enter programming mode.
2. Use '+' or '-' to select the day of the week you wish to program (e.g., Monday, Tuesday, etc.).
3. Press 'OK' to confirm the day.
4. The display will show the first program period. Use '+' or '-' to set the start time and then 'OK'.
5. Next, select the desired operating mode (Comfort, Reduced, etc.) for this period using '+' or '-' and confirm with 'OK'.
6. Repeat steps 4 and 5 for all desired program periods for that day.
7. You can copy programs from one day to another if needed (refer to specific instructions in the full manual for this feature).
8. Exit programming mode by pressing 'PROG' or 'MODE' button.

7. Vedligeholdelse

7.1. Rensning

Clean the thermostat casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the plastic and electronic components.

7.2. Udskiftning af batteri

The thermostat is powered by 2 x LR6 (AA) batteries. When the battery symbol appears on the display, or if the display becomes dim, it is time to replace the batteries.

1. Fjern bagdækslet på termostaten.
2. Fjern de gamle batterier.
3. Insert new 2 x LR6 (AA) batteries, observing correct polarity.
4. Sæt bagdækslet på igen.

The thermostat has a power reserve of approximately 10 minutes, allowing for battery replacement without losing programmed settings, provided the replacement is done promptly.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For detailed warranty information, technical support, or service inquiries, please refer to the official Hager webwebstedet eller kontakt din autoriserede forhandler. Gem din købskvittering som købsbevis.