FlySky FS-T6 2.4GHz 6-Channel Digital Transmitter and Receiver Radio System User Manual

1. Introduktion

This manual provides comprehensive instructions for the safe and effective use of your FlySky FS-T6 2.4GHz 6-Channel Digital Transmitter and Receiver Radio System. This system is designed for remote control of various models, including helicopters and airplanes, offering reliable 2.4GHz AFHDS technology.

Key features include a backlit LCD screen for clear visibility, 6 proportional channels for precise control, and a low voltage warning system to ensure operational safety.

Figur 1: Vinklet view of the FlySky FS-T6 transmitter, showing the antenna, control sticks, switches, and the backlit LCD screen.

2. Opsætning

2.1. Batteriinstallation

The FS-T6 transmitter requires eight (8) AA batteries (not included) for operation, providing a 12V DC power supply. Ensure batteries are inserted with correct polarity as indicated inside the battery compartment.

1. Åbn batteridækslet på bagsiden af ​​senderen.
2. Insert 8 AA batteries, observing the correct positive (+) and negative (-) terminals.
3. Luk batterirummets dæksel forsvarligt.

2.2. Modtagertilslutning

The included receiver is designed to work seamlessly with the FS-T6 transmitter. Connect the receiver to your model's electronic speed controller (ESC) and servos according to your model's specific wiring diagram. The receiver supports 6 channels.

2.3. Bindende procedure

The transmitter and receiver are typically pre-bound from the factory. If re-binding is necessary, follow these general steps:

1. Sørg for, at senderen er slukket.
2. Connect the bind plug to the B/VCC port on the receiver.
3. Apply power to the receiver (e.g., via an ESC or separate battery). The receiver's LED should flash rapidly.
4. While holding the bind button on the transmitter (if available, otherwise refer to specific model instructions), power on the transmitter.
5. The receiver's LED should become solid, indicating successful binding.
6. Sluk for både modtageren og senderen. Fjern bindeproppen fra modtageren.
7. Power on the transmitter first, then the receiver, to confirm the bind.

3. Betjeningsvejledning

3.1. Transmitter Overview

The FS-T6 features an ergonomic design with clearly labeled controls for intuitive operation.

Figur 2: Forside view of the FlySky FS-T6 transmitter, highlighting the main controls, the "FLY SKY" logo, and the LCD display.

3.2. Grundlæggende kontroller

• Kontrolpinde: Used for primary control inputs such as throttle, aileron, elevator, and rudder.
• Kontakter: Various switches are available for auxiliary functions, flight modes, or gear control.
• Knopper: Proportional knobs provide fine-tuning for specific channels or functions.

3.3. LCD-skærm

The 3.1-inch backlit LCD display provides real-time information about your model's settings, battery voltage, and other critical data. Navigate through menus using the buttons adjacent to the screen.

3.4. Lav Voltage Advarsel

The transmitter features a low voltage warning system that activates when the battery voltage drops below 9 volts. This alerts the user to replace or recharge the batteries to prevent loss of control.

3.5. Valg af modeltype

The FS-T6 supports both helicopter and airplane model types. Ensure the correct model type is selected in the transmitter's settings menu to ensure proper control surface mixing and functionality.

4. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre senderen. Undgå at bruge opløsningsmidler eller slibende rengøringsmidler.
• Opbevaring: Opbevar senderen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer. Fjern batterierne, hvis den opbevares i længere perioder, for at forhindre lækage.
• Batteripleje: Brug altid nye AA-batterier af høj kvalitet. Hvis du bruger genopladelige batterier, skal du sørge for, at de er fuldt opladet før hver brug.

5. Fejlfinding

• Ingen strøm/display: Check battery installation and ensure batteries have sufficient charge. Verify the power switch is in the ON position.
• Loss of Signal/No Control: Ensure the transmitter and receiver are properly bound. Check the distance between the transmitter and receiver; operating range is limited. Verify receiver power supply.
• Betjeningselementer reagerer ikke korrekt: Confirm the correct model type (helicopter/airplane) is selected in the transmitter settings. Check servo connections to the receiver. Calibrate controls if necessary (refer to advanced programming sections not covered in this basic manual).
• Lav voltage Advarsel: Replace or recharge the transmitter batteries immediately. Continued operation with low voltage can lead to loss of control.
• Difficulty with Switch Setup: Some users may find configuring switches challenging. Refer to the detailed programming guide for the FS-T6 for advanced setup procedures.

6. Specifikationer

7. Garanti og support

For specific warranty information and technical support, please refer to the official Flysky website or contact your authorized Flysky dealer. Keep your purchase receipt as proof of purchase for any warranty claims.