SVS PB-1000 Powered Subwoofer

1. Introduktion

Thank you for choosing the SVS PB-1000 Powered Subwoofer. This manual provides essential information for the proper setup, operation, and maintenance of your new subwoofer. The PB-1000 is designed to deliver deep, powerful, and accurate bass for both home theater and music listening experiences. Its 10-inch high-excursion driver and 300-watt RMS (700+ watts peak) Sledge STA-300D DSP amplifier ensure precise control and impressive low-frequency extension.

Figur 1.1: Forside view of the SVS PB-1000 Subwoofer without the grille, highlighting the driver and port.

2. Sikkerhedsoplysninger

Please read all safety instructions before operating your SVS PB-1000 subwoofer. Retain this manual for future reference.

• Strømkilde: Connect the subwoofer only to a power outlet of the type described in this manual or marked on the unit.
• Ventilation: Sørg for tilstrækkelig ventilation omkring subwooferen. Bloker ikke ventilationsåbningerne.
• Vand og fugt: Do not expose the subwoofer to rain, moisture, dripping, or splashing. Do not place objects filled with liquids, such as vases, on the apparatus.
• Varme: Do not place the subwoofer near heat sources such as radiators, heat registers, stoves, or other apparatus (including ampløftere), der producerer varme.
• Rensning: Rengør kun med en tør klud.
• Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.
• Placering: Place the subwoofer on a stable, level surface to prevent tipping.

3. Pakkens indhold

Upon opening the box, please verify that all items are present and in good condition:

• SVS PB-1000 Powered Subwoofer
• Aftagelig strømledning
• Lynstartguide (se denne manual for detaljerede instruktioner)
• Grille (pre-installed or separate)

Figur 3.1: Forside view of the SVS PB-1000 Subwoofer with the grille attached.

4. Opsætning

4.1 Placering af subwoofer

Subwoofer placement significantly impacts performance. Experiment with different locations to find the best sound for your room. Common placement options include:

• Foran i rummet: Near the front speakers, often in a corner or along the front wall. Corner placement can increase output but may also emphasize certain frequencies.
• Mid-Wall: Along a side wall, which can provide a more balanced bass response.
• "Subwoofer Crawl": Place the subwoofer in your primary listening position, then crawl around the room to find where the bass sounds best. This is often the ideal spot for the subwoofer.

Figur 4.1: Eksample of SVS PB-1000 placement in a living space.

4.2 Forbindelser

The PB-1000 offers both Line Level (RCA) and Speaker Level inputs. Choose the connection method that best suits your audio system.

Figure 4.2: Rear panel connections and controls of the SVS PB-1000.

4.2.1 Line Level Connection (Recommended)

This is the preferred method for most home theater receivers and pre-amplifiers with a dedicated Subwoofer/LFE output.

1. Connect one end of an RCA cable to the LFE/Subwoofer output on your receiver/processor.
2. Connect the other end of the RCA cable to the "LINE LEVEL INPUT" (LFE) on the PB-1000's rear panel.
3. If your receiver has separate Left and Right pre-outs for the subwoofer, connect both to the "LINE LEVEL INPUT" (Left and Right) on the PB-1000.

4.2.2 Speaker Level Connection

Use this method if your receiver/ampLifieren har ikke en dedikeret subwoofer-udgang.

1. Connect speaker wires from the main left and right speaker outputs of your receiver/amplifier to the "HIGH LEVEL SPEAKER INPUT" terminals on the PB-1000. Ensure correct polarity (+ to + and - to -).
2. Then, connect your main left and right speakers to the "HIGH LEVEL SPEAKER OUTPUT" terminals on the PB-1000.

4.3 Tænd

1. Connect the detachable power cord to the AC inlet on the rear panel of the PB-1000.
2. Sæt den anden ende af netledningen i en passende stikkontakt.
3. Flip the main power switch on the rear panel to the "ON" position. The LED indicator on the front of the subwoofer will illuminate.

5. Betjeningsknapper

The SVS PB-1000 features several controls on its rear panel to fine-tune its performance to your system and room acoustics.

• Volumen (forstærkning): Justerer subwooferens samlede udgangsniveau. Start med en lav indstilling og øg gradvist, indtil bassen blandes problemfrit med dine hovedhøjttalere.
• Lavpasfilter (delefilter): This control sets the upper frequency limit for the subwoofer. Frequencies above this setting will be rolled off.
  • If using a receiver with LFE output and bass management, set this to LFE (120Hz) or bypass if your receiver handles the crossover.
  • If using speaker level inputs or a stereo receiver without bass management, adjust this to blend with your main speakers (typically between 60Hz and 100Hz).
• Fase: Adjusts the phase of the subwoofer output relative to your main speakers. This helps ensure that bass waves from the subwoofer and main speakers arrive at your listening position in sync.
  • Start at 0 degrees. If the bass sounds weak or hollow, try 180 degrees. The setting that produces the loudest and most impactful bass is usually correct.
• Auto/On/Standby Switch:
  • Auto: The subwoofer will automatically turn on when an audio signal is detected and enter standby mode after a period of inactivity.
  • På: Subwooferen forbliver tændt konstant.
  • Standby: The subwoofer remains in a low-power standby state.

6. Vedligeholdelse

The SVS PB-1000 is designed for years of reliable performance with minimal maintenance.

• Rensning: Use a soft, dry cloth to clean the cabinet. Avoid using abrasive cleaners, solvents, or harsh chemicals.
• Støv: Regularly dust the driver and port areas to prevent accumulation.
• Ventilation: Sørg for bagsiden amplifier panel has adequate airflow and is not obstructed.
• Opbevaring: Hvis subwooferen opbevares i længere tid, skal den afbrydes fra strømmen og opbevares et køligt og tørt sted.

7. Fejlfinding

If you experience issues with your PB-1000, consult the following table before contacting customer support.

8. Specifikationer

Figure 8.1: SVS PB-1000 Subwoofer dimensions.

9. Garantioplysninger

SVS products are designed for reliability and performance. The SVS PB-1000 Subwoofer comes with a comprehensive warranty. Please refer to the official SVS website or your purchase documentation for the most current and detailed warranty terms and conditions. Generally, the warranty covers defects in materials and workmanship under normal use.

Garantitype: Fuld

For warranty claims or inquiries, please retain your proof of purchase and contact SVS customer support.

10. Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact SVS customer support:

• Webwebsted: Visit the official SVS webwebsted med ofte stillede spørgsmål, supportartikler og kontaktoplysninger.
• E-mail/Telefon: Specific contact details can be found on the SVS webwebstedets supportsektion.

When contacting support, please have your product model (PB-1000) and serial number ready.