AXA Slim Steady LED Back Light with Parking Light - Instruction Manual

1. Introduktion

The AXA Slim Steady LED Back Light is designed to enhance your bicycle's visibility and safety. Featuring a compact, flat design and integrated LED technology, this taillight includes a parking light function that keeps the light illuminated for a period after you stop, thanks to its capacitor. This manual provides essential information for proper installation, operation, and maintenance.

2. Sikkerhedsoplysninger

• Sørg altid for, at lygten er sikkert monteret, inden du kører.
• Kontroller regelmæssigt lygtens funktionalitet, især inden natkørsel.
• Do not look directly into the LED light, as it may cause temporary vision impairment.
• Keep the light clean to maintain optimal visibility.
• This product is designed for bicycle use only.

3. Pakkens indhold

Bekræft at alle komponenter er til stede:

• AXA Slim Steady LED Back Light (1 unit)
• Mounting hardware (screws, nuts, washers - typically included for standard rack mounting)

4. Installation

The AXA Slim Steady LED Back Light is designed for rear mounting on bicycle racks or fenders with 80 mm bolt spacing.

4.1 Montering af lyset

1. Identify the mounting holes on your bicycle's rear rack or fender. The light requires two holes spaced 80 mm apart.
2. Position the AXA Slim Steady LED Back Light against the mounting surface, aligning its bolt holes with those on your bicycle.
3. Secure the light using the provided mounting hardware (screws, washers, and nuts). Ensure the screws are tightened firmly but do not overtighten to avoid damaging the light housing.

Figur 1: The AXA Slim Steady LED Back Light securely mounted on a bicycle's rear rack. This image shows the light's position and how it integrates with the bicycle's rear structure.

4.2 Elektrisk tilslutning

This taillight is typically powered by a bicycle dynamo. Connect the two wires from the taillight to the corresponding output terminals of your dynamo or dynamo-powered headlight. Ensure correct polarity if indicated by your dynamo system.

Figur 2: Bag view of the AXA Slim Steady LED Back Light, highlighting the transparent casing and the area where electrical connections are made. This view provides insight into the light's internal structure and connection points.

5. Betjening

The AXA Slim Steady LED Back Light operates automatically when connected to a functioning dynamo system.

• Main Light Function: When the bicycle is in motion and the dynamo is generating power, the LED back light will illuminate, providing continuous rear visibility.
• Parking Light Function: The integrated capacitor stores energy while you are riding. When you stop (e.g., at a traffic light), the parking light function activates, keeping the LED illuminated for approximately 4 minutes. This ensures continued visibility even when stationary.

Figur 3: En vinklet view of the AXA Slim Steady LED Back Light, showcasing its slim profile and integrated reflector. This perspective highlights the overall design and compact nature of the light.

6. Vedligeholdelse

• Rensning: Wipe the light's lens and housing with a soft, damp klud til at fjerne snavs og skidt. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Inspektion: Periodically check the mounting screws for tightness and ensure the electrical connections are secure.
• LED-levetid: The LED is designed for long-term use and does not require replacement under normal operating conditions.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please refer to the official AXA webwebstedet eller kontakt din forhandler. Gem din købsbevis i tilfælde af garantikrav.

Fabrikant: AXA

Webwebsted: www.axa-bike.com