PAC SWI-RC-1 Steering Wheel Control Interface User Manual

1. Introduktion

The PAC SWI-RC-1 Steering Wheel Control Interface is designed to seamlessly integrate your vehicle's factory steering wheel controls with an aftermarket radio. This universal interface supports a wide range of vehicles and major radio brands, allowing you to retain the convenience and safety of your steering wheel controls after upgrading your car's audio system.

2. Sikkerhedsoplysninger

• Frakobl altid køretøjets negative batteripol, inden du påbegynder nogen form for installation.
• Professionel installation anbefales for optimal ydeevne og sikkerhed.
• Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.
• Do not operate the vehicle or attempt to program the device while driving.
• Hold enheden væk fra fugt og ekstreme temperaturer.

3. Produktet er slutview

The PAC SWI-RC-1 offers advanced features for integrating steering wheel controls:

• Hurtig og nem fastholdelse af ratbetjening til over 3000 køretøjer.
• Hurtig og nem forprogrammeret knapfunktion via DIP-switch-valg.
• Fungerer på analoge (resistive) og data-SWC-systemer.
• Kompatibel med køretøjer med CAN-Bus, GMLAN, KLASSE II, LIN-Bus, I-BUS eller analog SWC.
• Understøtter klassisk SWI-RC-knapprogrammering.
• Customizable button functions including short press, long press, and button reassignment.
• Giver en 2 amp, 12-volt accessory output for CAN-Bus, LAN, and Class II applications.
• Kompatibel med alle nyere radiomærker med 3.5 mm eller to-tråds tilslutninger.

4. Pakkens indhold

Your PAC SWI-RC-1 package should include the following items:

• PAC SWI-RC-1 Interface Module
• Hovedledningsnet
• 3.5mm Jack to Two-Wire Connection Cable
• Instruktionsmanual (dette dokument)

5. Opsætning og installation

Installation of the PAC SWI-RC-1 involves three main steps:

5.1. Tjekliste før installation

• Ensure your aftermarket radio is equipped with a wired remote input (e.g., 3.5mm headphone style jack or a Blue/Yellow wire labeled W/R, REM, Wired Remote, Remote, Rem Cont).
• Gather necessary tools: wire strippers, crimpers, electrical tape, multimeter, and vehicle-specific panel removal tools.

5.2. Step 1: Select Your Device, Vehicle, and Radio via Web App

Gå til pac-audio.com/swi-rc-1 on your PC or mobile device. Follow the on-screen prompts to select your specific vehicle (make, model, year) and aftermarket radio brand and model. This step is crucial for generating the correct DIP switch settings and wiring diagram for your application.

5.3. Step 2: Set the DIP Switches

Based on the information provided by the PAC web app, set the DIP switches on the SWI-RC-1 module. The web app will display a clear image or diagram indicating the correct positions for your specific vehicle and radio combination.

5.4. Step 3: Wire the Module

Follow the detailed wiring diagram provided by the PAC web app. This diagram will show you how to connect the SWI-RC-1's wiring harness to your vehicle's factory wiring and your aftermarket radio. Ensure all connections are made accurately and securely.

Vigtige kompatibilitetsnoter:

• Kenwood-modeller: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798 are not compatible. These models require the SWI-CP5.
• Clarion CZ500: Understøtter ikke fjernbetjening via Bluetooth.
• JVC KW-NT1 and KW-NT3HDT: Understøtter ikke forudindstillinger op og ned fra ratbetjening.
• Pioneer AVIC-Fxxx radioer: Do not interpret radio preset seeking commands. This is a radio limitation.
• Pioneer radioer med Bluetooth: Steering wheel controls will not adjust phone call volume. Volume must be adjusted on the radio face. This is a radio limitation.
• Pioneer AVIC-Z110BT, Z120BT, Z130BT, Z140BH and AVIC-X920BT, X930BT, X940BT: Only these models support Voice Recognition via wired remote input.

6. Betjeningsvejledning

Once installed and configured, the PAC SWI-RC-1 allows you to operate your aftermarket radio using your vehicle's factory steering wheel controls. The functionality of each button can be customized via the PAC web app during the setup process.

• Standardfunktioner: Typically, buttons like Volume Up/Down, Seek/Track Up/Down, and Mode/Source will function as expected.
• Tilpassede funktioner: The interface supports assigning different functions to a short press versus a long press of a button, allowing for expanded control options. Refer to your specific configuration from the PAC web app for assigned functions.

7. Vedligeholdelse

The PAC SWI-RC-1 is a low-maintenance device. To ensure its longevity and proper function:

• Keep the module and its connections free from dust and debris.
• Avoid exposing the module to excessive moisture or direct sunlight.
• Forsøg ikke at åbne modulet casing, da dette kan ugyldiggøre garantien.

8. Fejlfinding

If you encounter issues with your PAC SWI-RC-1, consider the following:

• Ingen funktionalitet: Double-check all wiring connections for proper contact and insulation. Verify that the DIP switches are set correctly according to the PAC web app.
• Forkert knaprespons: Revisit the PAC web app to confirm your button programming. Ensure that the correct functions are assigned to each button press (short vs. long).
• Specific Radio Limitations: Refer to the compatibility notes in Section 5.4. Some radio models have inherent limitations that the SWI-RC-1 cannot overcome.
• Strømproblemer: Ensure the vehicle's battery is properly connected and providing adequate power.

For further assistance, consult the detailed installation guides available on the PAC webwebstedet eller kontakt teknisk support.

9. Specifikationer

10. Garanti

The PAC SWI-RC-1 Steering Wheel Control Interface comes with a 3 års garanti fra købsdatoen. Gem venligst din købsbevis i tilfælde af garantikrav.

11. Support

For technical support or further inquiries, please contact PAC customer service:

• Telefon: 1-866-427-2999
• Driftstider: Monday to Friday: 8:30 AM to 5:00 PM EST, Saturday: 10:00 AM to 4:00 PM EST
• Webwebsted: www.pac-audio.com