ET2 Harmony E24506-91PC LED Pendant Light Instruction Manual

1. Introduktion og overview

This manual provides detailed instructions for the safe installation, operation, and maintenance of your ET2 Harmony E24506-91PC LED Pendant Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The ET2 Harmony pendant light features multiple bubble glass balls, each illuminated by an integrated LED. The individual pendants are suspended by adjustable cables, allowing for customization of the fixture's overall design and drop height. The fixture is designed for indoor use and is fully dimmable.

Image 1.1: The ET2 Harmony E24506-91PC LED Pendant Light, showcasing its design with multiple bubble glass spheres.

2. Sikkerhedsoplysninger

WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the circuit breaker or fuse box before installation, servicing, or changing any components. Consult a qualified electrician if you are unsure about the installation process.

• Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
• Use only UL Listed wire connectors.
• Overskrid ikke den angivne voltage (120 volt).
• Modificér ikke armaturet på nogen måde.
• Hold brandbare materialer væk fra lysarmaturet.
• Brug sikkerhedsbriller og handsker under installationen.

3. Pakkens indhold

Carefully unpack the fixture and check that all components are present and undamaged. Retain all packaging materials until installation is complete.

• Pendant Light Fixture (Canopy with integrated LED pendants)
• Mounting Hardware (Mounting plate, screws, wire nuts)
• Instruktionsmanual (dette dokument)

4. Opsætning og installation

Installation should be performed by a qualified electrician or a person with experience in electrical wiring.

4.1 Nødvendigt værktøj (medfølger ikke)

• Phillips skruetrækker
• Flad skruetrækker
• Afisoleringstænger
• Elektrisk tape
• Stige

4.2 Installationstrin

1. Sluk for strømmen: Locate the circuit breaker or fuse box controlling the power to the installation location and turn off the power. Verify power is off using a voltage tester.
2. Forbered monteringsoverfladen: Ensure the junction box is securely mounted and capable of supporting the fixture's weight (approximately 11.07 pounds).
3. Fastgør monteringsplade: Secure the fixture's mounting plate to the junction box using the provided screws.
4. Foretag elektriske forbindelser:
   • Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box using a wire nut.
   • Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
   • Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
   • Sørg for, at alle forbindelser er sikre, og at de er isoleret med elektrikertape, hvis det er nødvendigt.
5. Secure Fixture Canopy: Carefully push the wired connections into the junction box. Align the fixture canopy with the mounting plate and secure it using the provided screws.
6. Juster vedhængslængder: The individual pendant cables are adjustable. To adjust, gently push the cable into the canopy's cable grip and pull to the desired length. Ensure all pendants are securely set before proceeding.
7. Install Glass Balls: The bubble glass balls are pre-installed with LED bulbs. Ensure they are securely attached to their respective pendant cables.
8. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen.

Image 4.1: Dimensional drawing of the ET2 Harmony E24506-91PC, indicating a 12.75-inch width and a maximum overall height of 126 inches.

Image 4.2: Detail of the fixture's polished chrome canopy and the attachment points for the adjustable pendant cables.

5. Betjeningsvejledning

The ET2 Harmony E24506-91PC LED Pendant Light is designed for simple operation.

• Tænd/sluk: Styr lyset ved hjælp af en standard vægafbryder, der er tilsluttet armaturets kredsløb.
• Dæmpningsfunktion: This fixture is fully dimmable. For optimal performance, use with a compatible LED dimmer switch. Consult your electrician for dimmer compatibility.

6. Vedligeholdelse

Regelmæssig vedligeholdelse vil bidrage til at bevare din pendellampes udseende og funktionalitet.

• Rensning: Sluk for strømmen før rengøring. Brug en blød, tør eller let fugtet klud.amp cloth to wipe the polished chrome finish and glass spheres. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• LED udskiftning: The integrated LED bulbs are designed for long life. If replacement is ever needed, contact ET2 customer support for guidance on obtaining compatible replacement parts. Do not attempt to replace LEDs with standard bulbs.

7. Fejlfinding

If you experience issues with your pendant light, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, contact ET2 customer support.

8. Specifikationer

9. Garanti og support

9.1 Garantioplysninger

This ET2 Harmony E24506-91PC LED Pendant Light is covered by a 1 års begrænset producentgaranti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader som følge af forkert installation, ulykker, misbrug, misbrug eller uautoriserede ændringer.

9.2 Kundesupport

For technical assistance, warranty claims, or to order replacement parts, please contact ET2 customer support. Have your model number (E24506-91PC) and proof of purchase ready when contacting support.

You can find contact information for ET2 by visiting their official webwebstedet eller forhandleren, hvor produktet blev købt.