Puig 6789W

Puig 6789W Traffic Windscreen Instruction Manual for Honda Wave 12-13

Model: 6789W

1. Introduktion

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig 6789W Traffic Windscreen. This windscreen is specifically designed for Honda Wave models manufactured between 2012 and 2013. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe use of the product.

2. Sikkerhedsoplysninger

Always prioritize safety when working on your motorcycle. Failure to follow these safety guidelines may result in injury or damage to the product or motorcycle.

  • Ensure the motorcycle is stable and on a level surface before starting installation.
  • Brug passende personlige værnemidler, såsom handsker og øjenbeskyttelse.
  • Do not overtighten fasteners, as this can strip threads or crack components. Refer to torque specifications if available.
  • Regularly inspect the windscreen and mounting hardware for any signs of wear, damage, or looseness.
  • Hvis du er usikker på et trin i installationsprocessen, skal du kontakte en kvalificeret motorcykelmekaniker.

3. Pakkens indhold

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer.

  • 1x Puig 6789W Traffic Windscreen (Transparent)
  • 1x Mounting Hardware Kit (brackets, bolts, washers, nuts)
  • 1x Brugsanvisning (dette dokument)
Image showing the Puig 6789W Traffic Windscreen and its associated mounting hardware.

Figure 1: The Puig 6789W Traffic Windscreen and its components.

4. Opsætning og installation

This section details the step-by-step process for installing the Puig 6789W Traffic Windscreen on your Honda Wave (2012-2013).

4.1. Nødvendigt værktøj

  • Sekskantnøglesæt
  • Skruenøgle sæt
  • Skruetrækker (Phillips eller flad, efter behov)
  • Blød klud til rengøring

4.2. Installationstrin

  1. Forbered motorcyklen: Park the Honda Wave on a stable, level surface. Turn off the engine and remove the key.
  2. Identificér monteringspunkter: Locate the designated mounting points on your Honda Wave's handlebars or front fairing. These are typically existing bolt holes.
  3. Saml beslag: Attach the provided mounting brackets to the windscreen using the smaller bolts and washers. Do not fully tighten yet.
  4. Fastgør til motorcykel: Carefully position the windscreen assembly onto the motorcycle's mounting points. Use the larger bolts, washers, and nuts to secure the brackets to the motorcycle. Hand-tighten all fasteners initially.
  5. Juster position: Adjust the windscreen's angle and height to your preferred riding position. Ensure it does not obstruct your view or interfere with steering.
  6. Endelig stramning: Once the desired position is achieved, progressively tighten all bolts and nuts. Ensure they are secure but do not overtighten. Double-check all connections.

5. Betjening

Once installed, the Puig 6789W Traffic Windscreen operates passively by deflecting wind and debris. No active operation is required. Before each ride, perform a quick visual inspection to ensure the windscreen is securely attached and free from damage.

6. Vedligeholdelse

Proper maintenance will extend the life and clarity of your windscreen.

  • Rensning: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material. Rinse thoroughly and dry with a clean, soft cloth.
  • Inspektion: Periodically check all mounting bolts and nuts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the windscreen for cracks, scratches, or other damage.
  • Opbevaring: If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.

7. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på.

ProblemMulig årsagLøsning
Windscreen vibrates excessivelyLoose mounting bolts; incorrect installation.Check and tighten all mounting bolts. Re-evaluate installation steps.
Reduced visibility through windscreenDirt, scratches, or improper cleaning.Clean the windscreen with mild soap and water. Avoid abrasive materials. If scratched, consider replacement.
Windscreen feels loose after ridingFasteners have loosened due to vibration.Regularly inspect and tighten all mounting hardware.

8. Specifikationer

FeatureDetalje
Modelnummer6789W
MærkePuig
KompatibilitetHonda Wave (2012-2013)
FarveTransparent / Klar
MaterialePlast
InstallationstypeVehicle-specific fit, Self-adhesive
Pakkedimensioner36 x 31 x 16 cm
Varens vægt500 gram

9. Garanti og support

Puig-produkter er fremstillet efter høje standarder. For information om garantidækning, reklamationer eller teknisk support, henvises til den officielle Puig-side. website or contact your authorized Puig dealer. Keep your proof of purchase for warranty purposes.

Fabrikant: Puig

Webwebsted: www.puig.tv

© 2023 Puig. Alle rettigheder forbeholdes. Denne manual er kun til orientering.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.