ProMaster 4964

ProMaster Multi-Function RF Timer Remote (Model 4964) Instruction Manual

Indledning

Thank you for choosing the ProMaster Multi-Function RF Timer Remote, Model 4964. This wireless remote control system is designed to provide advanced shutter release and timer functions for a wide range of cameras. It operates on a reliable 2.4GHz frequency, offering a wireless range of up to 100 meters (300 feet) and 16 selectable channels to minimize interference. This manual will guide you through the setup, operation, and maintenance of your new remote.

Produkt overview

The ProMaster Multi-Function RF Timer Remote system consists of two main components: a transmitter and a receiver. The transmitter allows you to control your camera wirelessly, while the receiver connects to your camera's shutter release port.

ProMaster Multi-Function RF Timer Remote Transmitter and Receiver

Image: The ProMaster Multi-Function RF Timer Remote, showing both the handheld transmitter (left) and the compact receiver (right) with their respective LCD screens and control buttons.

Nøglefunktioner:

  • 2.4GHz Wireless System: Ensures reliable communication between the transmitter and receiver.
  • Udvidet rækkevidde: Operates up to 100 meters (300 feet) for flexible positioning.
  • 16 valgbare kanaler: Helps avoid interference from other wireless devices.
  • Multi-Function Timer: Supports self-timer, interval timer, long exposure timer, and continuous shooting.
  • Broad Camera Compatibility: Works with most cameras equipped with a wired shutter release port, requiring a specific ProMaster Camera Release Cable (sold separately).

Opsætning

1. Batteriinstallation

Both the transmitter and receiver require 2 AAA batteries each. Ensure correct polarity when inserting the batteries.

  1. Find batterirummet på bagsiden af ​​både senderen og modtageren.
  2. Skub batteridækslet op.
  3. Insert 2 AAA batteries into each unit, matching the positive (+) and negative (-) terminals as indicated.
  4. Luk batteridækslet forsvarligt.

2. Connecting the Receiver to Your Camera

The receiver connects to your camera via a specific ProMaster Camera Release Cable (not included, sold separately). Ensure you have the correct cable for your camera model.

  1. Attach the receiver to your camera's hot shoe mount for secure placement. If your camera does not have a hot shoe, the receiver can be placed nearby or attached using a strap.
  2. Connect one end of the ProMaster Camera Release Cable to the receiver's output port.
  3. Connect the other end of the cable to your camera's wired shutter release port.
  4. Turn on your camera and the receiver.

3. Kanalvalg

Both the transmitter and receiver must be set to the same channel for proper communication. The device supports 16 channels.

  • On both the transmitter and receiver, locate the channel selection button or switch.
  • Select a channel (e.g., Channel 1) on the transmitter.
  • Set the receiver to the exact same channel.
  • Test the connection by pressing the shutter button on the transmitter. The camera should respond. If not, try a different channel pair.

Betjeningsvejledning

The ProMaster Multi-Function RF Timer Remote offers various modes for controlling your camera's shutter.

Basic Shutter Release

  • Ensure the transmitter and receiver are powered on and set to the same channel.
  • Press the shutter button on the transmitter halfway to autofocus (if supported by your camera and lens).
  • Press the shutter button fully to trigger the camera's shutter.

Timer funktioner

The remote supports advanced timer functions. Refer to the on-screen menu of the transmitter to navigate and set these modes.

  • Selvudløser: Set a delay before the shutter is released.
  • Interval Timer: Program the camera to take photos at regular intervals over a set period. Ideal for time-lapse photography.
  • Long Exposure Timer: Control exposure times longer than typically available on your camera, often used in Bulb mode.
  • Continuous Shutter Release: Set the number of photos to be taken in a continuous burst.

Detailed instructions for setting specific timer parameters are available through the transmitter's LCD menu and control buttons. Use the directional pad and 'SET' button to adjust values and confirm settings.

Opretholdelse

  • Rensning: Use a soft, dry cloth to clean the remote. Do not use liquid cleaners or solvents.
  • Udskiftning af batteri: Replace AAA batteries in both units when the low battery indicator appears or when performance degrades. Remove batteries if the remote will not be used for an extended period to prevent leakage.
  • Opbevaring: Opbevar fjernbetjeningen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
  • Håndtering: Undgå at tabe fjernbetjeningen eller udsætte den for hårde stød.

Fejlfinding

Problem Mulig løsning
Remote does not trigger camera.
  • Sørg for, at både sender og modtager er tændt.
  • Kontroller batteriniveauer og udskift om nødvendigt.
  • Kontroller, at senderen og modtageren er indstillet til den samme kanal.
  • Ensure the camera release cable is securely connected to both the receiver and the camera.
  • Confirm the camera is turned on and in a compatible shooting mode.
  • Try a different channel to avoid interference.
Begrænset trådløs rækkevidde eller uregelmæssig forbindelse.
  • Kontroller batteriniveauet i begge enheder.
  • Ensure there are no large metallic objects or strong radio sources between the transmitter and receiver.
  • Try changing to a different channel to avoid interference.
  • Reducer afstanden mellem sender og modtager.
Timerfunktionerne fungerer ikke som forventet.
  • Review the operating instructions for the specific timer function.
  • Ensure all timer parameters (delay, interval, exposure time, number of shots) are correctly set on the transmitter.
  • Confirm your camera is in the appropriate mode (e.g., Bulb mode for long exposure).

Specifikationer

Feature Detalje
Mærke Pro Master
Modelnavn 4964
Forbindelsesteknologi Radiofrekvens (RF)
Frekvens 2.4 GHz
Maksimal rækkevidde 100 meter (300 fod)
Antal kanaler 16
Kompatible enheder Cameras with wired shutter release port (requires specific ProMaster Camera Release Cable)
Controller type Knap kontrol
Speciel funktion Ergonomic design, Multi-Function Timer (Self-timer, Interval timer, Long exposure timer, Continuous shutter)
Batterier påkrævet 2 AAA batteries (for transmitter), 2 AAA batteries (for receiver)
UPC 029144049645

Garanti og support

For warranty information and technical support, please refer to the official ProMaster website or contact your authorized ProMaster dealer. Keep your purchase receipt as proof of purchase for warranty claims.

You can visit the ProMaster store on Amazon for more information: ProMaster Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.