1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your Docooler Digital Tachometer K975. This 52mm (2-inch) LCD gauge is designed for automotive applications, providing accurate engine RPM readings from 0 to 9999 RPM with an integrated warning light feature. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Produktfunktioner
- Diameter: 52mm (2 inches)
- Power: DC 10-15V (12V Professional)
- Display: Blue Digital LED Readout
- Measurement Range: 0-9999 RPM
- Warning Point: Activates at 5000 RPM
- High accuracy and easy operation
- Leveres med monteringsvejledning
3. Specifikationer
| Enhed | RPM |
| Måleområde | 0~9999 RPM |
| Warning Point | 5000 RPM |
| Magt | 12V DC, Max. 0.3A |
| LCD størrelse | Approx. 52mm / 2 inches |
| Tachometer Size (Dia.*H) | 5.7 x 5.5 cm / 2.2 x 2.2 tommer |
| Overordnede mål (L x B x H) | 17 x 12 x 7.8 cm / 6.7 x 4.7 x 3.1 tommer |
| Farve | Sort |
| Materiale | Plast |
| Modelnummer | K975 |
| UPC | 519752202711 |
4. Pakkens indhold
Når du åbner pakken, skal du kontrollere, at alle varer er til stede og ubeskadigede:
- 1x Docooler Digital Tachometer K975
Note: Additional mounting hardware or wiring may be included depending on the specific kit. Refer to the packaging for a complete list.
5. Opsætning og installation
Installation of the Docooler Digital Tachometer K975 requires basic automotive electrical knowledge. If you are unsure about any steps, it is recommended to seek professional assistance.
5.1 Sikkerhedsforanstaltninger
- Frakobl køretøjets batteri, før du påbegynder elektrisk arbejde.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.
- Mount the gauge in a location that does not obstruct the driver's view eller forstyrre køretøjets kontroller.
5.2 Montering af omdrejningstælleren
The tachometer is designed for a 52mm (2-inch) diameter mounting hole. It can be dash-mounted or mounted using the included stand.
- Choose a suitable, flat surface for mounting.
- If flush mounting, cut a 52mm diameter hole. If using the stand, secure the stand to the desired location using appropriate fasteners.
- Insert the tachometer into the mounting location or attach it to the stand.
- Secure the tachometer firmly in place.
Image shows the front view of the Docooler Digital Tachometer K975. The circular gauge features a black casing and a blue digital LCD screen displaying '0' RPM. Below the RPM reading, 'WARNING' and 'RPM' are visible. The gauge is mounted on a black stand.
5.3 Ledningsinstruktioner
The tachometer typically has three wires for connection:
- Rød ledning: Connect to a switched 12V DC power source (e.g., ignition switch ACC).
- Sort ledning: Connect to a reliable vehicle ground point.
- Green/Yellow/White Wire (Signal): Connect to the engine's RPM signal wire. This is typically found at the ignition coil negative terminal, ECU tachometer output, or specific engine sensor. Consult your vehicle's service manual for the exact location of the RPM signal wire.
Ensure all connections are soldered or crimped securely and insulated with electrical tape or heat shrink tubing.
6. Betjeningsvejledning
Once properly installed and wired, the Docooler Digital Tachometer K975 operates automatically when the vehicle's ignition is turned on.
- Tænd: When the ignition is turned to the ACC or ON position, the tachometer will power on, and the blue digital LED display will illuminate.
- RPM display: The display will show the current engine RPM in numerical format.
- Advarselslampe: The integrated warning light will activate when the engine RPM reaches or exceeds 5000 RPM. This serves as a visual alert for high engine speeds.
7. Vedligeholdelse
The Docooler Digital Tachometer K975 is designed for durability and requires minimal maintenance.
- Rensning: Brug en blød, tør klud til at rengøre displayet ogasing. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige plastikken eller skærmen.
- Tilslutningskontrol: Kontrollér ledningsforbindelserne regelmæssigt for at sikre, at de forbliver fastgjorte og fri for korrosion.
- Miljøbeskyttelse: While designed for automotive use, avoid exposing the gauge to extreme moisture or direct, prolonged sunlight when possible to extend its lifespan.
8. Fejlfinding
Hvis du støder på problemer med din omdrejningstæller, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Omdrejningstælleren tænder ikke. | No power to the red wire; poor ground connection. | Check 12V power supply and ground connections. Ensure ignition is on. |
| Display shows "0" or incorrect RPM. | Incorrect or loose signal wire connection; incompatible signal type. | Verify the signal wire is correctly connected to the RPM source. Ensure the signal source is active. Some vehicles may require a tach adapter. |
| RPM reading is sluggish or jumps erratically. | Interference in the signal wire; poor signal quality; loose connections. | Sørg for, at signalledningen er ført væk fra højvolumen-tage cables. Check all wiring connections for tightness and proper insulation. |
| Warning light does not activate at 5000 RPM. | Faulty internal component; incorrect RPM signal. | Verify RPM reading accuracy. If RPM is correct and light still fails, the unit may be faulty. |
9. Garanti og support
Docooler products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or contact your retailer. For technical support or inquiries, please visit the official Docooler webwebsted eller kontakt deres kundeserviceafdeling.
Docooler Store Link: Visit the Docooler Store on Amazon