AIRAM 79W 80mm lineær halogenpære instruktionsmanual

1. Introduktion

This manual provides essential instructions for the safe installation, operation, and maintenance of your AIRAM 79W 80mm Linear Halogen Bulb. Please read this manual thoroughly before use and retain it for future reference.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse:

• Sluk: Always ensure the power supply to the fixture is switched off at the mains before installing, removing, or cleaning the bulb.
• Køl ned: Allow the bulb to cool completely before handling. Halogen bulbs operate at high temperatures and can cause severe burns.
• Korrekt håndtering: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves.
• Korrekt Wattage: Brug kun pærer med den korrekte watttage og bindtage for your fixture. Exceeding the maximum wattage can cause overheating and fire.
• Bortskaffelse: Bortskaf brugte pærer i henhold til lokale regler.
• Indendørs brug: This bulb is designed for indoor use unless specified otherwise by the fixture.

3. Produktet er slutview

The AIRAM 79W 80mm Linear Halogen Bulb is an energy-efficient light source designed for various lighting applications. It provides a warm white light with a luminous flux of 1000 lumens, equivalent to a 100-watt incandescent bulb. Its linear design and R7s base make it suitable for specific linear halogen fixtures.

Image: A clear glass linear halogen bulb with white ceramic R7s end caps. The bulb features a filament running through its center and is designed for specific fixtures requiring an 80mm linear bulb.

4. Opsætning og installation

Follow these steps to safely install your linear halogen bulb:

1. Sluk for strømmen: Locate the light fixture's power switch and turn it off. For added safety, switch off the circuit breaker supplying power to the fixture.
2. Tillad afkøling: If replacing an old bulb, wait for it to cool down completely before touching it.
3. Fjern den gamle pære (hvis relevant): Carefully remove the old bulb from the fixture. Linear halogen bulbs typically have spring-loaded contacts. Gently push one end of the bulb towards the opposite contact and then pull it out.
4. Indsæt ny pære: Holding the new AIRAM bulb with a clean cloth or gloves, align one end of the bulb with one of the R7s contacts in the fixture. Gently push the bulb towards that contact, compressing the spring, and then guide the other end into the opposite contact. Ensure both ends are securely seated.
5. Gendan strøm: Once the bulb is securely in place, restore power to the fixture at the circuit breaker and then turn on the light switch.

5. Betjeningsvejledning

The AIRAM 79W 80mm Linear Halogen Bulb operates immediately upon receiving power. Simply use the light switch connected to your fixture to turn the bulb on or off. No special operating procedures are required.

6. Vedligeholdelse

Din halogenpære kræver minimal vedligeholdelse:

• Rensning: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners.
• Udskiftning: Replace the bulb when it reaches the end of its lifespan or fails. Refer to the installation section for replacement instructions.

7. Fejlfinding

If your AIRAM halogen bulb is not functioning correctly, consider the following:

• Pæren lyser ikke:
  • Kontroller, om afbryderen er tændt.
  • Kontroller, at afbryderen til armaturet ikke er udløst.
  • Ensure the bulb is correctly and securely seated in the fixture's contacts.
  • The bulb may have reached the end of its life and needs replacement.
• Flimrende lys:
  • Check for loose connections in the fixture or bulb contacts.
  • Ensure the bulb is fully compatible with any dimmer switches in use.

Hvis problemerne fortsætter efter kontrol af disse punkter, skal du kontakte en kvalificeret elektriker.

8. Specifikationer

9. Garanti og support

For garantioplysninger eller teknisk support, kontakt venligst forhandlerens eller producentens officielle webwebsted. Gem din købsbevis i tilfælde af garantikrav.